Merge branch 'sipeed:main' into main

docs/hardware/en/maixcam/README.md

@@ -65,11 +65,14 @@ We have not only developed the hardware, but also provided a complete software e
 * [MaixPy Official Documentation](https://wiki.sipeed.com/maixpy/)
 * [MaixCDK](https://github.com/sipeed/MaixCDK)
 * [System Source Code](https://github.com/sipeed/LicheeRV-Nano-Build)
-* [Schematic](https://cn.dl.sipeed.com/shareURL/LICHEE/LicheeRV_Nano/02_Schematic)
-* [Core Board (LicheeRV-Nano) Hardware Information](https://cn.dl.sipeed.com/shareURL/LICHEE/LicheeRV_Nano)
+* [camera and lens](https://dl.sipeed.com/shareURL/MaixCAM/MaixCAM/Camera)
+* [Schematic](https://dl.sipeed.com/shareURL/LICHEE/LicheeRV_Nano/02_Schematic)
+* [Core Board (LicheeRV-Nano) Hardware Information](https://dl.sipeed.com/shareURL/LICHEE/LicheeRV_Nano)
 * Core board pin diagram:
 ![](../../zh/lichee/assets/RV_Nano/intro/RV_Nano_3.jpg)
 
+* **Enclosure and Stand:** You can find the introduction in [MaixCAM Enclosure](./assemble.md). Additionally, we provide 3D model files for stands and other components. Please visit [makerworld.com](https://makerworld.com/) and search for `MaixCAM`.
+
 ## Chip Information
 
 MaixCAM is based on Sipeed's LiecheeRV-Nano core board, which is based on the SG2002 chip for computing power, so their materials can also be referred to.

docs/hardware/en/maixcam/assemble.md

@@ -41,3 +41,8 @@ Here are some points to note:
 **File Uploaded on MakerWorld:** [Click here to view](https://makerworld.com/zh/models/440321)
 
 **Recommended Material:** It is recommended to use a resin with a heat resistance of 70 degrees Celsius for photopolymerization printing.
+
+
+## Stand Open Source Files
+
+For more open source 3D files, please visit [makerworld.com](https://makerworld.com/) and search for `MaixCAM`.

docs/hardware/en/maixcam/faq.md

@@ -2,7 +2,7 @@
 title: MaixCAM FAQ (Frequently Asked Questions)
 ---
 
-If you can't find your problem below, you can also refer to [MaixPy FAQ](https://wiki.sipeed.com/maixpy/doc/zh/faq.html).
+**If you can't find your problem below, you can also refer to [MaixPy FAQ](https://wiki.sipeed.com/maixpy/doc/zh/faq.html).**
 
 ## What's the difference between MaixCAM and LicheeRV-Nano?
 

docs/hardware/en/sidebar.yaml

@@ -276,6 +276,15 @@ items:
             -   label: Questions&Answers
                 file: tang/Tang-Nano-Doc/questions.md
                 target: _blank
+        -   label: Tang Primer 15K
+            items:
+            -   label: Introduction
+                file: tang/tang-primer-15k/primer-15k.md
+            -   label: Install IDE
+                file: tang/Tang-Nano-Doc/install-the-ide.md
+            -   label: Questions&Answers
+                file: tang/Tang-Nano-Doc/questions.md
+                target: _blank
         -   label: Tang Primer (Sold out)
             file: tang/Tang-primer/Tang-primer.md
             items:
@@ -302,6 +311,24 @@ items:
             -   label: Questions&Answers
                 file: tang/Tang-Nano-Doc/questions.md
                 target: _blank
+        -   label: Tang Mega 138K
+            items:
+            -   label: Introduction
+                file: tang/tang-mega-138k/mega-138k.md
+            -   label: Install IDE
+                file: tang/Tang-Nano-Doc/install-the-ide.md
+            -   label: Questions&Answers
+                file: tang/Tang-Nano-Doc/questions.md
+                target: _blank
+        -   label: Tang Mega 60K
+            items:
+            -   label: Introduction
+                file: tang/tang-mega-60k/mega-60k.md
+            -   label: Install IDE
+                file: tang/Tang-Nano-Doc/install-the-ide.md
+            -   label: Questions&Answers
+                file: tang/Tang-Nano-Doc/questions.md
+                target: _blank
     -   label: Tang PMOD
         file: tang/tang-PMOD/FPGA_PMOD.md         
 -   label: MaixSense

docs/hardware/en/tang/tang-mega-138k/mega-138k-pro.md

@@ -19,30 +19,30 @@ update:
 
   - Large capacity LUT
   - Large capacity memory
-  - PCIE3.0 x 4
+  - PCIe 3.0 x 4
   - SFP+ x 2
   - RISCV hard core
 
 ## Product Appearance
 
-<img src="./assets/mega_138k_top.png" width="45%">
+<img src="./assets/mega_138k_pro_top.png" width="45%">
 
 ## Hardware Parameters
 
-### Core Board Parameters
+### SOM Board Parameters
 
 <table>
 	<thead>
 		<tr>
 			<th style="text-align:center">Item</th>
 			<th style="text-align:center">Parameter</th>
-			<th style="text-align:center">Supplement</th>
+			<th style="text-align:center">comment</th>
 		</tr>
 	</thead>
 	<tbody>
 		<tr>
 			<td style="text-align:left">FPGA Chip</td>
-			<td style="text-align:left"><a href="http://www.gowinsemi.com.cn/prod_view.aspx?TypeId=10&amp;FId=t3:10:3&amp;Id=167#GW2A">GW5AST-LV138FPG676A</a>
+			<td style="text-align:left"><a href="https://www.gowinsemi.com/en/product/detail/60/">GW5AST-LV138FPG676A</a>
 			</td>
 			<td style="text-align:left">
 				<table>
@@ -92,7 +92,7 @@ update:
                     </tr>
                     <tr>
                         <td>PCIE Hard Core</td>
-                        <td>1<br>Speed optional x1, x2, x4, x8 PCIe 2.0</td>
+                        <td>1<br>Speed optional x1, x2, x4, x8 PCIe 3.0</td>
                     </tr>
                     <tr>
                         <td>LVDS (Gbps)</td>
@@ -107,7 +107,7 @@ update:
                         <td>2.5Gbps (RX),<br>8 data channels,<br>2 clock channels</td>
                     </tr>
                     <tr>
-                        <td>Hard Core Processor</td>
+                        <td>Hard Core SoC</td>
                         <td>RiscV AE350_SOC</td>
                     </tr>
                     <tr>
@@ -139,17 +139,17 @@ update:
 		<tr>
 			<td style="text-align:left">Overall Package</td>
 			<td style="text-align:left">50mm x 70mm Size</td>
-			<td style="text-align:left">BTB Connector Connects the Core Board and the Base Board</td>
+			<td style="text-align:left">BTB CONN. Connects the SOM and the Dock Board</td>
 		</tr>
 	</tbody>
 </table>
 
-### Baseboard Parameters
+### Dock board Parameters
 
 | Item                | Quantity | Remarks                                           |
 | :------------------ | -------- | ------------------------------------------------- |
 | LED                 | 6        |                                                   |
-| WS2812              | 1        |                                                   |
+| WS2812              | 1        | The WS2812 & aRGB strip CONN. share the same pin  |
 | Button              | 4        |                                                   |
 | PCIE                | 1        |                                                   |
 | SFP+                | 2        |                                                   |
@@ -159,7 +159,7 @@ update:
 | PMOD                | 3        |                                                   |
 | ADC                 | 2        |                                                   |
 | MIPI CSI            | 2        | 3 LANE MIPI CSI                                   |
-| ARGB                | 1        | Same data pin with WS2812                         |
+| WS2812              | 1        | The aRGB strip CONN. & WS2812 share the same pin  |
 | DVP Interface       | 1        |                                                   |
 | RGB Interface       | 1        | Supports RGB888 screen                            |
 | MIC ARRAY Interface | 1        | Supports connecting Sipeed 6+1 microphone array   |
@@ -187,7 +187,7 @@ update:
 
 ## Getting Started
 
-Note that 138K is currently not supported by the education version, and you need to download V1.9.9Beta-5 or a newer version of the commercial IDE for use.  
+Note that 138K Pro is currently not supported by the education version, and you need to download V1.9.9 or a newer version of the commercial IDE for use.  
 Lic can be applied on the Gowin official website, or you can use the online Lic service provided by Sipeed. In the IDE, select Float Lic and fill in the following information:
 
 ~~~
@@ -211,8 +211,10 @@ Example code [github](https://github.com/sipeed/TangMega-138KPro-example)
 
   ## Communication Methods
 
-  - **Discussion forum: [maixhub.com/discussion](https://maixhub.com/discussion)**
-  - **QQ discussion group: [834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)**
+  - **Reddit** : [reddit.com/r/GowinFPGA/](reddit.com/r/GowinFPGA/)
+  - **Telegram** : [t.me/sipeed](t.me/sipeed)
+  - Discussion forum: [maixhub.com/discussion](https://maixhub.com/discussion)
+  - QQ discussion group: [834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)
   - Leave a message directly below this page
   - Business email : [support@sipeed.com](support@sipeed.com)
 
@@ -258,9 +260,12 @@ Example code [github](https://github.com/sipeed/TangMega-138KPro-example)
 
 Tang Mega 138K can meet different needs of customers in various scenarios. For technical support and business cooperation, please contact [support@sipeed.com](support@sipeed.com)
 
-## Frequently Asked Questions
+## Frequently Asked Questions (FAQs)
 
 ### The power light is not on after the board is powered on
 
 1. Please check if the power switch of the board is turned on.
 2. Check your power supply method.
+
+
+### For more questions and solutions, go to [Related Questions](./../Tang-Nano-Doc/questions.md) to view

docs/hardware/en/tang/tang-mega-138k/mega-138k.md

@@ -0,0 +1,304 @@
+---
+title: Tang Mega 138K ~Dock~
+keywords: FPGA, Tang, Mega, 138K
+update:
+  - date: 06-26-2024
+    version: v0.1
+    author: Serika
+    content:
+      - Create document
+---
+
+## Overview
+
+  Tang Mega 138K uses a 22nm process **GW5AST-LV138PG484A** FPGA chip, which has 138,240 lookup table units and nearly 300 DSP units. It contains eight high-speed transceivers with a speed range of 270Mbps ~ 6.6Gbps, suitable for transmitting data through high-speed ports such as PCIe. In addition, the chip contains a hard-core PCIe, which consumes better resources when using PCIe and achieves better performance. It is suitable for high-speed communication, protocol conversion, high-performance computing, and other occasions.
+  
+  Compared to the 138K Pro Dock, the 138K Dock has a smaller size and a lower price, and it replaces the SFP transceiver with USB3 SS(5Gbps). This not only effectively reduces the cost of high-speed communication but also brings better versatility.
+
+  aliexpress purchase link: [Click me](https://www.aliexpress.com/item/3256807078990410.html)
+
+## Board Features
+
+  - Large capacity LUT4
+  - Large capacity memory
+  - PCIe 2.0 x 4
+  - USB3.0 x 1
+  - RISCV hard core
+
+## Product Appearance
+
+<img src="./assets/mega_138k_top.png" width="45%">
+
+## Block Diagram
+
+TBD
+
+## Hardware Parameters
+
+### SOM Board Parameters
+
+<table>
+	<thead>
+		<tr>
+			<th style="text-align:center">Item</th>
+			<th style="text-align:center">Parameter</th>
+			<th style="text-align:center">comment</th>
+		</tr>
+	</thead>
+	<tbody>
+		<tr>
+			<td style="text-align:left">FPGA Chip</td>
+			<td style="text-align:left"><a href="https://www.gowinsemi.com/en/product/detail/60/">GW5AST-LV138PG484A</a>
+			</td>
+			<td style="text-align:left">
+				<table>
+					<tr>
+						<td>Logic Unit (LUT4)</td>
+						<td>138240</td>
+					</tr>
+					<tr>
+						<td>Register (FF)</td>
+						<td>138240</td>
+					</tr>
+					<tr>
+						<td>Distributed SRAM<br>(S-SRAM) (Kbits)</td>
+						<td>1080</td>
+					</tr>
+					<tr>
+						<td>Block SRAM (B-SRAM) (Kbits)</td>
+						<td>6120</td>
+					</tr>
+					<tr>
+						<td>Number of Block SRAMs (B-SRAM) (pcs)</td>
+						<td>340</td>
+					</tr>
+					<tr>
+						<td>Multiplier (18x18 Multiplier)/td>
+						<td>298</td>
+					</tr>
+					<tr>
+						<td>Phase-Locked Loop (PLLs)</td>
+						<td>12</td>
+					</tr>
+                    <tr>
+                        <td>Global Clock</td>
+                        <td>16</td>
+                    </tr>
+                    <tr>
+                        <td>High-Speed Clock</td>
+                        <td>24</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers</td>
+                        <td>4</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers Rate</td>
+                        <td>270Mbps-6.6Gbps</td>
+                    </tr>
+                    <tr>
+                        <td>PCIe HardCore</td>
+                        <td>x1<br>Speed optional x1, x2, x4, x8 PCIe 2.0</td>
+                    </tr>
+                    <tr>
+                        <td>LVDS (Gbps)</td>
+                        <td>1.25</td>
+                    </tr>
+                    <tr>
+                        <td>DDR3 (Mbps)</td>
+                        <td>1333</td>
+                    </tr>
+                        <td>Hard Core SoC</td>
+                        <td>RiscV AE350_SOC</td>
+                    </tr>
+                    <tr>
+                        <td>ADC</td>
+                        <td>2</td>
+                    </tr>
+					<tr>
+						<td>Total I/O Bank<</td>
+						<td>10</td>
+					</tr>
+				</table>
+			</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Memory</td>
+			<td style="text-align:left">1GB DDR3</td>
+			<td style="text-align:left">512MB x 2</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Flash</td>
+			<td style="text-align:left">128Mbits Flash x 1</td>
+			<td style="text-align:left">See <a href="#burn_flash">How to Burn to Flash</a></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">>Debug Interface</td>
+			<td style="text-align:left">Jtag + Uart</td>
+			<td style="text-align:left">JST SH1.0 8Pins CONN.</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Overall Package</td>
+			<td style="text-align:left">35mm x 45mm Size</td>
+			<td style="text-align:left">BTB CONN. Connects the SOM and the Dock Board</td>
+		</tr>
+	</tbody>
+</table>
+
+### Dock board Parameters
+
+| Item                 | Quantity | Remarks                                           |
+| :------------------  | ----     | ------------------------------------------------- |
+| LEDs                 | 4+8      | 4x Battery-Indicator+ 8x PMOD_LED                 |
+| WS2812               | 1        | The WS2812 & aRGB strip CONN. share the same pin  |
+| Buttons              | 3+1      | 3x User-KEY + 1x Reconfig-KEY                     |
+| PCIe                 | 1        | 4-lane @ 5Gbps，CH569 16bit HSPI                  |
+| USB3                 | 2        | SuperSpeed @ 5Gbps                                |
+| GbE                  | 1        | 1000Mbps Ethernet                                 |
+| DVI                  | 1        | DVI supports both RX and TX                       |
+| PMOD                 | 2        | Multiplexed with the the DVP CONN. & 2x20P header at the top of the Dock board |
+| ADC                  | 2        | 2x differential input channels                    |
+| WS2812               | 1        | The aRGB strip CONN. & WS2812 share the same pin  |
+| DVP Interface        | 1        | Multiplexed with the the PMOD & 2x20P header at the top of the Dock board |
+| RGB Interface        | 1        | Supports RGB888 screen                           |
+| MIC ARRAY Interface  | 1        | Supports Sipeed 6+1 microphone array             |
+| SD Slot              | 1        | 1-bit SDIO/MMC or SPI mode                       |
+| BATT CONN.           | 1        | Supports 3.7V li-on battery, with built-in charge management |
+| PWM FAN CONN.        | 1        | Supports PWM fan with TACHO                       |
+| Speaker CONN.        | 2        | Support stereo output, 2x 3W Speaker              |
+| 3.5mm Headphone CONN.| 1        | Supports stereo output, without Mic               |
+| MS5351               | 1        | Provides RefClk for Serdes; control output via onboard UART |
+| USB JTAG & UART      | 1        | Supports FPGA programming and provides UART function  |
+| 2x20P headers        | 2        | 2x20P header at the top of the Dock board multiplexed with the the PMOD & DVP CONN. |
+| Power button         | 1        | **Press and hold for 2 seconds to toggle power state** |
+| 12V DC               | 1        | DC5521                                       |
+
+## Hardware Resources
+
+- [Specification](https://dl.sipeed.com/shareURL/TANG/Mega_138K/01_Specification)
+- [Schematics](https://dl.sipeed.com/shareURL/TANG/Mega_138K/02_Schematic)
+- [PCB BOM](https://dl.sipeed.com/shareURL/TANG/Mega_138K/03_Designator_drawing)
+- [Dimension Diagram](https://dl.sipeed.com/shareURL/TANG/Mega_138K/04_Mechanical_drawing)
+- [3D Model](https://dl.sipeed.com/shareURL/TANG/Mega_138K/05_3D_file)
+- [Some Chip Manuals](https://dl.sipeed.com/shareURL/TANG/Mega_138K/07_Datasheet)
+
+## Getting Started
+
+Note that 138K is currently not supported by the education version, and you need to download V1.9.9 or a newer version of the commercial IDE for use.  
+Lic can be applied on the Gowin official website, or you can use the online Lic service provided by Sipeed. In the IDE, select Float Lic and fill in the following information:
+
+~~~
+ip: 106.55.34.119
+port: 10559
+~~~
+
+if the ip not work, try use "gowinlic.sipeed.com" domain's IP.
+
+Install IDE [Click me](https://wiki.sipeed.com/hardware/zh/tang/Tang-Nano-Doc/get_started/install-the-ide.html)
+
+
+Example code [github](https://github.com/sipeed/TangMega-138K-example)
+
+- Other Learning Resources
+
+  - Free online tutorial: [Verilog Tutorial](https://www.runoob.com/w3cnote/verilog-tutorial.html) (Learn Verilog)
+  - Free online FPGA tutorial: [Verilog](https://www.asic-world.com/verilog/index.html) (English website)
+  - Verilog practice website: [HDLBits](https://hdlbits.01xz.net/wiki/Main_Page) (English website)
+  - Online Gowin Semiconductor reference video tutorials: [Click here](http://www.gowinsemi.com.cn/video_complex.aspx?FId=n15:15:26)
+
+  ## Communication Methods
+  - **Reddit** : [reddit.com/r/GowinFPGA/](reddit.com/r/GowinFPGA/)
+  - **Telegram** : [t.me/sipeed](t.me/sipeed)
+  - Discussion forum: [maixhub.com/discussion](https://maixhub.com/discussion)
+  - QQ discussion group: [834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)
+  - Leave a message directly below this page
+  - Goto**[GitHub project page](https://github.com/sipeed/TangMega-138K-example)**and submit issues
+  - Business email : [support@sipeed.com](support@sipeed.com)
+
+## Precautions
+
+<table>
+    <tr>
+        <th>Item</th>
+        <th>Precautions</th>
+    </tr>
+    <tr>
+        <td>Chip Model</td>
+        <td>The specific model of the FPGA chip used by Tang Mega 138K is <b>GW5AST-LV138FPG676A</b>. <br>Please select the package model <b>PBG484A</b> in the IDE.</td>
+    </tr>
+    <tr>
+        <td>Static Electricity</td>
+        <td>Please avoid static electricity hitting the PCBA; release the static electricity from your hands before touching the PCBA.</td>
+    </tr>
+    <tr>
+        <td>Tolerance Voltage</td>
+        <td>When using GPIO pin headers for external communication, ensure that the IO voltage is 3.3V. Excessive voltage will permanently damage the PCBA.</td>
+    </tr>
+    <tr>
+        <td>FPC Socket</td>
+        <td>When connecting the FPC soft cable, please ensure that the cable is completely and correctly inserted into the socket without any deviation.</td>
+    </tr>
+    <tr>
+        <td>PCIE Gold Finger</td>
+        <td>When testing the PCIE gold finger, ensure that both the host and the board are in the off or unpowered state to avoid short-circuiting the gold finger due to displacement during the insertion process.</td>
+    </tr>
+    <tr>
+        <td>Plug and Unplug</td>
+        <td>Please completely power off before plugging and unplugging.</td>
+    </tr>
+    <tr>
+        <td>Avoid Short Circuit</td>
+        <td>Please avoid any liquid or metal touching the solder pads of the components on the PCBA during the power-on process, otherwise it may cause a short circuit and burn the PCBA.</td>
+    </tr>
+</table>
+
+
+## Contact
+
+Tang Mega 138K can meet different needs of customers in various scenarios. For technical support and business cooperation, please contact [support@sipeed.com](support@sipeed.com)
+
+## Frequently Asked Questions (FAQs)
+
+### After powering on the board, only four indicator lights on the dockboard are on, the SOM indicator light is not on
+
+1. Please check if the board’s power has been turned on, press and hold the PWR button (next to the HDMI port) for 2 seconds to turn on the power.
+
+### After powering on the board, the Battery-Indicator light on the dcokboard is flashing
+
+1. This is normal behavior, usually, the last LED (near the 12V DC connector) is flashing;
+2. When the board is connected to a 3.7V lithium battery, these LEDs will serve as battery level indicators.
+
+### After pressing and holding the PWR button for 2 seconds, all the indicator lights on the dockboard turn off and then light up in sequence
+
+1. Check your power supply method, this situation means that the power supply is insufficient;
+2. Solutions (choose one):
+    a. Connect both the board’s **USB-3.0** and **USB-DEBUG** for power supply, i.e., dual 5V USB power supply; 
+    b. Connect a 12V DC power supply to the board, if using the USB-C to 12V DC connector from the accessories, a PD power source with 12V output capability is required;
+    c. Connect a 3.7V lithium battery to power the board, note that the battery voltage must be ≥3.6V and the continuous discharge capacity must be ≥600mA.
+
+### IDE cannot find the model GW5AST-LV138PG484A
+
+1. The educational version does not support 138K, please switch to the commercial version. The following image shows the educational version (which does not support 138K);
+<img src="../assets/questions/no_model_in_IDE.png" width="35%">
+
+2. IDE version is too low to use, update the IDE version ≥ **1.9.9**.
+
+### How to burn the bitstream to FLASH {#burn_flash}
+
+1. Setting the **Programmer** as shown in the figure below:
+
+<img src="./assets/flash_mode.png" alt="flash_mode" width=35%>
+
+2. Check the position of the DIP switch; the correct position is shown in the figure below:
+
+<img src="./assets/dip-key_defualt.png" alt="dip-key_defualt" width=35%>
+
+### No Response or Undesirable Pin Phenomenon After Burning
+
+1. First, ensure that the IDE has selected the correct model **GW5AST-LV138PG484AC1/10**; every parameter in the figure below **NUST** be consistent.
+
+<img src="./assets/partno_138K.png" alt="device_choose" width=35%>
+
+2. Then, check your code and the corresponding simulation waveforms to meet the requirements. The GAO tools in GOWIN IDE maybe helpful. For more information, please refer to the GOWIN document [SUG100](https://www.gowinsemi.com/upload/database_doc/1885/document/660bb2366d0b3.pdf)(require login).
+
+### For more questions and solutions, go to [Related Questions](./../Tang-Nano-Doc/questions.md) to view

docs/hardware/en/tang/tang-mega-60k/mega-60k.md

@@ -0,0 +1,245 @@
+---
+title: Tang Mega 60K Dock
+keywords: FPGA, Tang, Mega, 60K
+update:
+  - date: 06-26-2024
+    version: v0.1
+    author: Serika
+    content:
+      - Create document
+---
+
+## Overview
+
+  Date to Release: July xx, 2024
+  TBD
+
+  aliexpress purchase link: [Click me](https://sipeed.aliexpress.com/store/1101739727)
+
+## Board Features
+
+  - Medium capacity LUT4
+  - Medium capacity memory
+  - PCIe 2.0 x 4
+  - USB3.0 x 1
+  - MIPI C-PHY & D-PHY RX/TX
+  - TBD
+
+## Product Appearance
+
+TBD
+
+## Block Diagram
+
+TBD
+
+## Hardware Parameters
+
+### SOM Board Parameters
+
+<table>
+	<thead>
+		<tr>
+			<th style="text-align:center">Item</th>
+			<th style="text-align:center">Parameter</th>
+			<th style="text-align:center">Supplement</th>
+		</tr>
+	</thead>
+	<tbody>
+		<tr>
+			<td style="text-align:left">FPGA Chip</td>
+			<td style="text-align:left"><a href="https://www.gowinsemi.com.cn/prod_view.aspx?TypeId=74&FId=t3:10:3&Id=188#GW5AT">GW5AT-LV60PG484A</a>
+			</td>
+			<td style="text-align:left">
+				<table>
+					<tr>
+						<td>Logic Unit (LUT4)</td>
+						<td>59904</td>
+					</tr>
+					<tr>
+						<td>Register (FF)</td>
+						<td>59904</td>
+					</tr>
+					<tr>
+						<td>Distributed SRAM<br>(S-SRAM) M(Kbits)</td>
+						<td>468</td>
+					</tr>
+					<tr>
+						<td>Block SRAM (B-SRAM) (Kbits)</td>
+						<td>2124</td>
+					</tr>
+					<tr>
+						<td>Number of Block SRAMs (B-SRAM) (pcs)</td>
+						<td>118</td>
+					</tr>
+					<tr>
+						<td>Multiplier (18x18 Multiplier)</td>
+						<td>118</td>
+					</tr>
+					<tr>
+						<td>Phase-Locked Loop (PLLs)</td>
+						<td>8</td>
+					</tr>
+                    <tr>
+                        <td>Global Clock</td>
+                        <td>16</td>
+                    </tr>
+                    <tr>
+                        <td>High-Speed Clock</td>
+                        <td>20</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers</td>
+                        <td>4</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers Rate</td>
+                        <td>270Mbps-12.5Gbps</td>
+                    </tr>
+                    <tr>
+                        <td>PCIe HardCore</td>
+                        <td>x1<br>Speed optional x1, x2, x4, x8 PCIe 2.0</td>
+                    </tr>
+                    <tr>
+                        <td>LVDS (Gbps)</td>
+                        <td>1.25</td>
+                    </tr>
+                    <tr>
+                        <td>DDR3 (Mbps)</td>
+                        <td>1333</td>
+                    </tr>
+                    <tr>
+                        <td>MIPI D-PHY HardCore</td>
+                        <td>2.5Gbps（RX/TX），<br>4x data lane，<br>1x clock lane</td>
+                    </tr>
+                    <tr>
+                        <td>MIPI C-PHY HardCore</td>
+                        <td>2.5Gbps（RX/TX），<br>=5.75Gbps,RX/TX<br>3x 3bit data lane</td>
+                    </tr>
+                    <tr>
+                        <td>ADC</td>
+                        <td>2</td>
+                    </tr>
+					<tr>
+						<td>Total I/O Bank</td>
+						<td>11</td>
+					</tr>
+				</table>
+			</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Memory</td>
+			<td style="text-align:left">4Gb DDR3</td>
+			<td style="text-align:left">512MB x 1</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Flash</td>
+			<td style="text-align:left">128Mbits Flash x 1</td>
+			<td style="text-align:left">See <a href="#burn_flash">How to Burn to Flash</a></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Debug Interface</td>
+			<td style="text-align:left">Jtag + Uart</td>
+			<td style="text-align:left">JST SH1.0 8Pins CONN.</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Overall Package</td>
+			<td style="text-align:left">35mm x 45mm Size</td>
+			<td style="text-align:left">BTB CONN. Connects the SOM and the Dock Board</td>
+		</tr>
+	</tbody>
+</table>
+
+### Dock board Parameters
+
+TBD
+
+## Hardware Resources
+
+- [Specification](https://dl.sipeed.com/shareURL/TANG/Mega_60K/01_Specification)
+- [Schematics](https://dl.sipeed.com/shareURL/TANG/Mega_60K/02_Schematic)
+- [PCB BOM](https://dl.sipeed.com/shareURL/TANG/Mega_60K/03_Designator_drawing)
+- [Dimension Diagram](https://dl.sipeed.com/shareURL/TANG/Mega_60K/04_Mechanical_drawing)
+- [3D Model](https://dl.sipeed.com/shareURL/TANG/Mega_60K/05_3D_file)
+- [Some Chip Manuals](https://dl.sipeed.com/shareURL/TANG/Mega_60K/07_Datasheet)
+
+## Getting Started
+
+Note that 138K is currently not supported by the education version, and you need to download V1.9.9 or a newer version of the commercial IDE for use.  
+Lic can be applied on the Gowin official website, or you can use the online Lic service provided by Sipeed. In the IDE, select Float Lic and fill in the following information:
+
+~~~
+ip: 106.55.34.119
+port: 10559
+~~~
+
+if the ip not work, try use "gowinlic.sipeed.com" domain's IP.
+
+Install IDE [Click me](https://wiki.sipeed.com/hardware/zh/tang/Tang-Nano-Doc/get_started/install-the-ide.html)
+
+
+Example code [github](https://github.com/sipeed/TangMega-60K-example)
+
+- Other Learning Resources
+
+  - Free online tutorial: [Verilog Tutorial](https://www.runoob.com/w3cnote/verilog-tutorial.html) (Learn Verilog)
+  - Free online FPGA tutorial: [Verilog](https://www.asic-world.com/verilog/index.html) (English website)
+  - Verilog practice website: [HDLBits](https://hdlbits.01xz.net/wiki/Main_Page) (English website)
+  - Online Gowin Semiconductor reference video tutorials: [Click here](http://www.gowinsemi.com.cn/video_complex.aspx?FId=n15:15:26)
+
+  ## Communication Methods
+
+  - **Reddit** : [reddit.com/r/GowinFPGA/](reddit.com/r/GowinFPGA/)
+  - **Telegram** : [t.me/sipeed](t.me/sipeed)
+  - Discussion forum: [maixhub.com/discussion](https://maixhub.com/discussion)
+  - QQ discussion group: [834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)
+  - Leave a message directly below this page
+  - Goto**[GitHub project page](https://github.com/sipeed/TangMega-60K-example)**and submit issues
+  - Business email : [support@sipeed.com](support@sipeed.com)
+
+## Precautions
+
+<table>
+    <tr>
+        <th>Item</th>
+        <th>Precautions</th>
+    </tr>
+    <tr>
+        <td>芯片型号</td>
+        <td>The specific model of the FPGA chip used by Tang Mega 138K is<b>GW5AT-LV60PG484A</b> <br> <br>Please select the package model <b>PBG484A</b> in the IDE.</td>
+    </tr>
+    <tr>
+        <td>Static Electricity</td>
+        <td>Please avoid static electricity hitting the PCBA; release the static electricity from your hands before touching the PCBA.</td>
+    </tr>
+    <tr>
+        <td>Tolerance Voltage</td>
+        <td>When using GPIO pin headers for external communication, ensure that the IO voltage is <b>3.3V</b>. Excessive voltage will permanently damage the PCBA.</td>
+    </tr>
+    <tr>
+        <td>FPC Socket</td>
+        <td>When connecting the FPC soft cable, please ensure that the cable is completely and correctly inserted into the socket without any deviation.</td>
+    </tr>
+    <tr>
+        <td>PCIE Gold Finger</td>
+        <td>When testing the PCIE gold finger, ensure that both the host and the board are in the off or unpowered state to avoid short-circuiting the gold finger due to displacement during the insertion process.</td>
+    </tr>
+    <tr>
+        <td>Plug and Unplug</td>
+        <td>Please completely power off before plugging and unplugging.</td>
+    </tr>
+    <tr>
+        <td>Avoid Short Circuit</td>
+        <td>Please avoid any liquid or metal touching the solder pads of the components on the PCBA during the power-on process, otherwise it may cause a short circuit and burn the PCBA.</td>
+    </tr>
+</table>
+
+
+## Contact
+
+Tang Mega 60K can meet different needs of customers in various scenarios. For technical support and business cooperation, please contact [support@sipeed.com](support@sipeed.com)
+
+
+## Frequently Asked Questions (FAQs)
+
+TBD

docs/hardware/en/tang/tang-nano-20k/nano-20k.md

@@ -177,10 +177,12 @@ More example codes [Github](https://github.com/sipeed/TangNano-20K-example)
 
 ## Contact
 
-- **Reddit** : [reddit.com/r/GowinFPGA/](reddit.com/r/GowinFPGA/)
-- **Telegram** : [t.me/sipeed](t.me/sipeed)
-- Leave message in the end of this page
-- Business email : [support@sipeed.com](support@sipeed.com)
+  - **Reddit** : [reddit.com/r/GowinFPGA/](reddit.com/r/GowinFPGA/)
+  - **Telegram** : [t.me/sipeed](t.me/sipeed)
+  - Discussion forum: [maixhub.com/discussion](https://maixhub.com/discussion)
+  - QQ discussion group: [834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)
+  - Leave message in the end of this page
+  - Business email : [support@sipeed.com](support@sipeed.com)
 
 ## Questions
 

docs/hardware/en/tang/tang-primer-15k/primer-15k.md

@@ -0,0 +1,245 @@
+---
+title: Tang Primer 15K Dock
+keywords: FPGA, Tang, Primer, 15K
+update:
+  - date: 06-26-2024
+    version: v0.1
+    author: Serika
+    content:
+      - Create document
+---
+## Overview
+
+  Date to Release: Autumn 2024
+  TBD
+
+  aliexpress purchase link: [Click me](https://sipeed.aliexpress.com/store/1101739727)
+
+## Board Features
+
+  - MIPI C-PHY & D-PHY RX/TX
+  - TBD
+
+## Product Appearance
+
+TBD
+
+## Block Diagram
+
+TBD
+
+## Hardware Parameters
+
+### SOM Board Parameters
+
+<table>
+	<thead>
+		<tr>
+			<th style="text-align:center">Item</th>
+			<th style="text-align:center">Parameter</th>
+			<th style="text-align:center">Supplement</th>
+		</tr>
+	</thead>
+	<tbody>
+		<tr>
+			<td style="text-align:left">FPGA Chip</td>
+			<td style="text-align:left"><a href="https://www.gowinsemi.com.cn/prod_view.aspx?TypeId=74&FId=t3:10:3&Id=188#G15K">GW5ART-15MG132P</a>
+			</td>
+			<td style="text-align:left">
+				<table>
+					<tr>
+						<td>Logic Unit (LUT4)</td>
+						<td>15120</td>
+					</tr>
+					<tr>
+						<td>Register (FF)</td>
+						<td>15120</td>
+					</tr>
+					<tr>
+						<td>Distributed SRAM<br>(S-SRAM) (Kbits)</td>
+						<td>118125</td>
+					</tr>
+					<tr>
+						<td>Block SRAM (B-SRAM) (Kbits)</td>
+						<td>630</td>
+					</tr>
+					<tr>
+						<td>Number of Block SRAMs (B-SRAM) (pcs)</td>
+						<td>35</td>
+					</tr>
+					<tr>
+						<td>Multiplier (18x18 Multiplier)</td>
+						<td>28+12</td>
+					</tr>
+					<tr>
+						<td>Phase-Locked Loop (PLLs)</td>
+						<td>2</td>
+					</tr>
+					    <td>Global Clock<</td>
+                        <td>16</td>
+                    </tr>
+                    <tr>
+                        <td>High-Speed Clock<</td>
+                        <td>2</td>
+                    </tr>
+					                    <tr>
+                        <td>Transceivers</td>
+                        <td>8</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers Rate</td>
+                        <td>270Mbps-6.6Gbps</td>
+                    </tr>
+                    <tr>
+                        <td>PCIe HardCore</td>
+                        <td>1<br>Speed optional x1, x2, x4, x8 PCIe 2.0<</td>
+                    </tr>
+                    <tr>
+                        <td>LVDS (Gbps)</td>
+                        <td>1.25</td>
+                    </tr>
+					    <td>MIPI D-PHY HardCore</td>
+                        <td>2.5Gbps（RX/TX），<br>4x data lane，<br>1x clock lane</td>
+                    </tr>
+                    <tr>
+                        <td>MIPI C-PHY HardCore</td>
+                        <td>2.5Gbps（RX/TX），<br>=5.75Gbps,RX/TX<br>3x 3bit data lane</td>
+                    </tr>
+					<tr>
+                        <td>PSRAM</td>
+                        <td>64Mb @ 667MHz</td>
+                    </tr>
+                    <tr>
+                        <td>ADC</td>
+                        <td>1</td>
+                    </tr>
+					<tr>
+						<td>Total GPIO Bank</td>
+						<td>4</td>
+				</table>
+			</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Flash</td>
+			<td style="text-align:left">64Mb</td>
+			<td style="text-align:left">See <a href="#burn_flash">How to Burn to Flash</a></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">>Debug Interface</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left">TBD</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Overall Package</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">GPIO</td>
+			<td style="text-align:left"> 53</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left"> MIPI IO </td>
+			<td style="text-align:left"> 10</td>
+			<td style="text-align:left">Supports both C-PHY & D-PHY</td>
+		</tr>
+	</tbody>
+</table>
+
+## Dock board Parameters
+
+
+<table>
+	<thead>
+		<tr>
+			<th style="text-align:center">Item</th>
+			<th style="text-align:center">Parameter</th>
+			<th style="text-align:center">comment</th>
+		</tr>
+	</thead>
+	<tbody>
+		<tr>
+			<td style="text-align:left">Debugger</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">USB-A</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left"> IOs Headers </td>
+			<td style="text-align:left"> TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left"> PMOD </td>
+			<td style="text-align:left"> TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Buttons</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Size</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+	</tbody>
+</table>
+
+## Hardware Resources
+
+- [Specification](https://dl.sipeed.com/shareURL/TANG/Primer_15K/01_Specification)
+- [Schematics](https://dl.sipeed.com/shareURL/TANG/Primer_15K/02_Schematic)
+- [PCB BOM](https://dl.sipeed.com/shareURL/TANG/Primer_15K/03_Designator_drawing)
+- [Dimension Diagram](https://dl.sipeed.com/shareURL/TANG/Primer_15K/04_Mechanical_drawing)
+- [3D Model](https://dl.sipeed.com/shareURL/TANG/Primer_15K/05_3D_file)
+- [Some Chip Manuals](https://dl.sipeed.com/shareURL/TANG/Primer_15K/07_Datasheet)
+
+
+## Getting Started
+
+Note that 15K is currently not supported by the education version, and you need to download V1.9.9.04 or a newer version of the commercial IDE for use.  
+Licence can be applied on the Gowin official website, or you can use the online Lic service provided by Sipeed. In the IDE, select Float Lic and fill in the following information:
+
+~~~
+ip: 106.55.34.119
+port: 10559
+~~~
+
+if the ip not work, try use "gowinlic.sipeed.com" domain's IP.
+
+if you don't want to apply for a licence, you can  choose the education version IDE. The education version IDE can be used without a licence, but it usually only contains a limited number of IPs.
+
+Install IDE [Click me](https://wiki.sipeed.com/hardware/zh/tang/Tang-Nano-Doc/get_started/install-the-ide.html)
+
+
+Example code [github](https://github.com/sipeed/TangPrimer-15K-example)
+
+- Other Learning Resources
+
+  - Free online tutorial: [Verilog Tutorial](https://www.runoob.com/w3cnote/verilog-tutorial.html) (Learn Verilog)
+  - Free online FPGA tutorial: [Verilog](https://www.asic-world.com/verilog/index.html) (English website)
+  - Verilog practice website: [HDLBits](https://hdlbits.01xz.net/wiki/Main_Page) (English website)
+  - Online Gowin Semiconductor reference video tutorials: [Click here](http://www.gowinsemi.com.cn/video_complex.aspx?FId=n15:15:26)
+
+## Communication Methods
+
+  - **Reddit** : [reddit.com/r/GowinFPGA/](reddit.com/r/GowinFPGA/)
+  - **Telegram** : [t.me/sipeed](t.me/sipeed)
+  - Discussion forum: [maixhub.com/discussion](https://maixhub.com/discussion)
+  - QQ discussion group: [834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)
+  - Leave a message directly below this page
+  - Goto**[GitHub project page](https://github.com/sipeed/TangPrimer-15K-example)**and submit issues
+  - Business email : [support@sipeed.com](support@sipeed.com)
+
+### TFrequently Asked Questions (FAQs)
+
+TBD
+
+

docs/hardware/en/tang/tang-primer-25k/primer-25k.md

@@ -80,8 +80,10 @@ Specifications, schematics, dimension drawings, etc. can be found here: [Click h
 
   ## Communication Methods
 
-  - **Discussion Forum: [maixhub.com](maixhub.com/discussion)**
-  - **QQ Discussion Group: [834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)**
+  - **Reddit** : [reddit.com/r/GowinFPGA/](reddit.com/r/GowinFPGA/)
+  - **Telegram** : [t.me/sipeed](t.me/sipeed)
+  - Discussion forum: [maixhub.com/discussion](https://maixhub.com/discussion)
+  - QQ discussion group: [834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)
   - Leave a message directly below this page
   - Business email: [support@sipeed.com](support@sipeed.com)
 

docs/hardware/zh/lichee/th1520/lpi4a/3_images.md

@@ -21,7 +21,7 @@ update:
 
 ## 内核支持
 
-目前平头哥官方 SDK 使用 Linux5.10 内核： https://gitee.com/thead-yocto
+目前平头哥官方 SDK 使用 Linux5.10 内核： https://gitee.com/xuantie-linux
 主线 linux6.x 内核正在移植中，主要社区贡献者：`Jisheng Zhang `
 
 ## Sipeed官方镜像

docs/hardware/zh/maixcam/README.md

@@ -70,10 +70,12 @@ MaixCAM **首发优惠价格 169 元**(Lite 版本 无屏幕和外壳)和 **249
 * [MaixPy 官方文档](https://wiki.sipeed.com/maixpy/)
 * [MaixCDK](https://github.com/sipeed/MaixCDK)
 * [系统源码](https://github.com/sipeed/LicheeRV-Nano-Build)
-* [原理图](https://cn.dl.sipeed.com/shareURL/LICHEE/LicheeRV_Nano/02_Schematic)
-* [核心板(LicheeRV-Nano) 硬件资料](https://cn.dl.sipeed.com/shareURL/LICHEE/LicheeRV_Nano)
+* [原理图](https://dl.sipeed.com/shareURL/LICHEE/LicheeRV_Nano/02_Schematic)
+* [摄像头和镜头](https://dl.sipeed.com/shareURL/MaixCAM/MaixCAM/Camera)
+* [核心板(LicheeRV-Nano) 硬件资料](https://dl.sipeed.com/shareURL/LICHEE/LicheeRV_Nano)
 * 核心板引脚图：
 ![](http://wiki.sipeed.com/hardware/zh/lichee/assets/RV_Nano/intro/RV_Nano_3.jpg)
+* 外壳和支架：可以在[MaixCAM 外壳](./assemble.md) 看到介绍，另外还提供了支架等 3D 模型文件，请到[makerworld.com](https://makerworld.com/) 搜索 `MaixCAM`。
 
 ## 芯片资料
 

docs/hardware/zh/maixcam/assemble.md

@@ -41,4 +41,9 @@ title: MaixCAM 外壳
 
 文件已上传MakerWorld，[点此跳转](https://makerworld.com/zh/models/440321)
 
-推荐使用耐温70度的树脂进行光固化打印
+推荐使用耐温70度的树脂进行光固化打印
+
+## 支架开源文件
+
+更多开源 3D 文件，请到[makerworld.com](https://makerworld.com/) 搜索 `MaixCAM`。
+

docs/hardware/zh/sidebar.yaml

@@ -295,6 +295,15 @@ items:
             -   label: 常见问题
                 file: tang/Tang-Nano-Doc/questions.md
                 target: _blank
+        -   label: Tang Primer 15K
+            items:
+            -   label: 板卡介绍
+                file: tang/tang-primer-15k/primer-15k.md
+            -   label: 安装 IDE
+                file: tang/Tang-Nano-Doc/get_started/install-the-ide.md
+            -   label: 常见问题
+                file: tang/Tang-Nano-Doc/questions.md
+                target: _blank
         -   label: Tang Primer (售罄)
             file: tang/Tang-primer/Tang-primer.md
             items:
@@ -323,6 +332,24 @@ items:
             -   label: 常见问题
                 file: tang/Tang-Nano-Doc/questions.md
                 target: _blank
+        -   label: Tang Mega 138K
+            items:
+            -   label: 板卡介绍
+                file: tang/tang-mega-138k/mega-138k.md
+            -   label: 安装 IDE
+                file: tang/Tang-Nano-Doc/get_started/install-the-ide.md
+            -   label: 常见问题
+                file: tang/Tang-Nano-Doc/questions.md
+                target: _blank
+        -   label: Tang Mega 60K
+            items:
+            -   label: 板卡介绍
+                file: tang/tang-mega-60k/mega-60k.md
+            -   label: 安装 IDE
+                file: tang/Tang-Nano-Doc/get_started/install-the-ide.md
+            -   label: 常见问题
+                file: tang/Tang-Nano-Doc/questions.md
+                target: _blank
     -   label: Tang PMOD
         file: tang/tang-PMOD/FPGA_PMOD.md
 -   label: MaixSense

docs/hardware/zh/tang/tang-mega-138k/mega-138k-pro.md

@@ -3,7 +3,7 @@ title: Tang Mega 138K Pro Dock
 keywords: FPGA, Tang, Mega, 138K
 update:
   - date: 2023-08-29
-    version: v
+    version: v0.9
     author: wonder
     content:
       - 新建文档
@@ -11,7 +11,7 @@ update:
 
 ## 产品概述
 
-Tang Mega 138K 使用 22nm 制程 GW5AST-LV138FPG676A FPGA 芯片，具有 138240 个查找表单元和近 300 个 DSP 单元。含有八个速度范围在 270Mbps ~ 12.5Gbps 高速收发器，适合用于光纤或者 PCIE 等高速口传递数据。此外，芯片含有硬核 PCIE，在使用 PCIE 的时候消耗更好的资源，并且得到更佳的性能。适用于高速通信、协议转换、高性能计算等场合。
+**Tang Mega 138K** 使用 22nm 制程 **GW5AST-LV138FPG676A** FPGA 芯片，具有 138240 个查找表单元和近 300 个 DSP 单元。含有八个速度范围在 270Mbps ~ 12.5Gbps 高速收发器，适合用于光纤或者 PCIE 等高速口传递数据。此外，芯片含有硬核 PCIE，在使用 PCIE 的时候消耗更好的资源，并且得到更佳的性能。适用于高速通信、协议转换、高性能计算等场合。
 
 淘宝购买链接：[点我](https://item.taobao.com/item.htm?id=740536508140)
 
@@ -25,7 +25,7 @@ Tang Mega 138K 使用 22nm 制程 GW5AST-LV138FPG676A FPGA 芯片，具有 13824
 
 ## 产品外观
 
-<img src="./assets/mega_138k_top.png" width="45%">
+<img src="./assets/mega_138k_pro_top.png" width="45%">
 
 ## 硬件参数
 
@@ -42,7 +42,7 @@ Tang Mega 138K 使用 22nm 制程 GW5AST-LV138FPG676A FPGA 芯片，具有 13824
 	<tbody>
 		<tr>
 			<td style="text-align:left">FPGA 芯片</td>
-			<td style="text-align:left"><a href="http://www.gowinsemi.com.cn/prod_view.aspx?TypeId=10&amp;FId=t3:10:3&amp;Id=167#GW2A">GW5AST-LV138FPG676A</a>
+			<td style="text-align:left"><a href="https://www.gowinsemi.com.cn/prod_view.aspx?TypeId=74&FId=t3:10:3&Id=188#GW5AST">GW5AST-LV138FPG676A</a>
 			</td>
 			<td style="text-align:left">
 				<table>
@@ -92,7 +92,7 @@ Tang Mega 138K 使用 22nm 制程 GW5AST-LV138FPG676A FPGA 芯片，具有 13824
                     </tr>
                     <tr>
                         <td>PCIE 硬核</td>
-                        <td>1个<br>速度可选 x1, x2, x4, x8 PCIe 2.0</td>
+                        <td>1个<br>速度可选 x1, x2, x4, x8 PCIe 3.0</td>
                     </tr>
                     <tr>
                         <td>LVDS (Gbps)</td>
@@ -100,7 +100,7 @@ Tang Mega 138K 使用 22nm 制程 GW5AST-LV138FPG676A FPGA 芯片，具有 13824
                     </tr>
                     <tr>
                         <td>DDR3 (Mbps)</td>
-                        <td>1,333</td>
+                        <td>1333</td>
                     </tr>
                     <tr>
                         <td>MIPI D-PHY硬核</td>
@@ -115,8 +115,8 @@ Tang Mega 138K 使用 22nm 制程 GW5AST-LV138FPG676A FPGA 芯片，具有 13824
                         <td>2</td>
                     </tr>
 					<tr>
-						<td>I/O Bank 总数</td>
-						<td>10</td>
+						<td>GPIO Bank 总数</td>
+						<td>6</td>
 					</tr>
 				</table>
 			</td>
@@ -151,15 +151,15 @@ Tang Mega 138K 使用 22nm 制程 GW5AST-LV138FPG676A FPGA 芯片，具有 13824
 | LED                 | 6    |                                                   |
 | WS2812              | 1    |                                                   |
 | 按键                | 4    |                                                   |
-| PCIE                | 1    |                                                   |
+| PCIe                | 1    | 4 lane @ 5Gbps                                    |
 | SFP+                | 2    |                                                   |
 | 千兆以太网          | 1    |                                                   |
 | DVI RX              | 2    | 与 DVI TX 互相占用                                |
 | DVI TX              | 2    | 与 DVI RX 互相占用                                |
 | PMOD                | 3    |                                                   |
 | ADC                 | 2    |                                                   |
-| MIPI CSI            | 2    | 3 LANE MIPI CSI                                   |
-| ARGB                | 1    | 与 WS2812 同数据引脚                              |
+| MIPI CSI            | 2    | 4 LANE MIPI CSI                                   |
+| aRGB                | 1    | 与 WS2812 同数据引脚                              |
 | DVP Interface       | 1    |                                                   |
 | RGB Interface       | 1    | 支持 RGB888 屏幕                                  |
 | MIC ARRAY Interface | 1    | 支持连接 Sipeed 6+1 麦克风阵列                    |
@@ -186,7 +186,7 @@ Tang Mega 138K 使用 22nm 制程 GW5AST-LV138FPG676A FPGA 芯片，具有 13824
 [部分芯片手册](https://dl.sipeed.com/shareURL/TANG/Mega_138K_Pro/07_Datasheet)
 
 ## 上手使用
-注意138K目前未被教育版支持，需要下载 V1.9.9Beta-5 或更新版本的商业版IDE使用。  
+注意138K目前未被教育版支持，需要下载 V1.9.9 或更新版本的商业版IDE使用。  
 Lic 可以在高云官网申请，或者使用Sipeed提供的在线Lic服务，在IDE中选择Float Lic，填写以下信息即可：
 ~~~
 ip: 106.55.34.119
@@ -211,6 +211,7 @@ port: 10559
 - **交流论坛: [maixhub.com/discussion](https://maixhub.com/discussion)**
 - **QQ 交流群：[834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)**
 - 直接本页下方留言
+- 前往**[Github项目主页](https://github.com/sipeed/TangMega-138KPro-example)**提交issue
 - 商业邮箱 : [support@sipeed.com](support@sipeed.com)
 
 ## 注意事项
@@ -222,7 +223,7 @@ port: 10559
     </tr>
     <tr>
         <td>芯片型号</td>
-        <td>Tang Mega 138K Pro 使用的 FPGA 芯片具体型号是 GW5AST-LV138FPG676A ，在 IDE 中选择封装型号 FCPBG676A</td>
+        <td>Tang Mega 138K Pro 使用的 FPGA 芯片具体型号是 <b>GW5AST-LV138FPG676A</b> <br>在 IDE 中选择封装型号 <b>FCPBG676A</b></br></td>
     </tr>
     <tr>
         <td>静电</td>
@@ -237,8 +238,8 @@ port: 10559
         <td>在连接 FPC 软排线的时候，请确保排线无偏侈地完整地插入到排线中</td>
     </tr>
     <tr>
-        <td>PCIE 金手指</td>
-        <td>在测试 PCIE 金手指时候，确保是主机端与板卡都处于关机或者未通电的状态，否则可能会因为插入过程中的易位导致金手指短路。</td>
+        <td>PCIe 金手指</td>
+        <td>在测试 PCIe 金手指时候，确保是主机端与板卡都处于关机或者未通电的状态，否则可能会因为插入过程中的易位导致金手指短路。</td>
     </tr>
     <tr>
         <td>插拔</td>
@@ -260,3 +261,20 @@ Tang Mega 138K 可以在多种场景实现客户不同方面的需要，技术
 
 1. 请检查是否开启了板子的电源开关。
 2. 检查自己的供电方式。
+
+### 如何下载到外部 FLASH {#burn_flash}
+
+进行如下选项设置：
+
+<img src="./assets/flash_mode.png" alt="flash_mode" width=35%>
+
+### 烧录后没反应或者引脚现象不对
+
+1. 首先确定IDE选择了正确的型号 **GW5AST-LV138FPG676AC1/10**，下图中的每一个参数都要求一致.
+
+<img src="./assets/partno_138K_pro.png" alt="device_choose" width=35%>
+
+2. 然后检查自己的代码和对应的仿真波形是否满足要求
+
+
+### 更多问题及其解决办法前往[相关问题](./../Tang-Nano-Doc/questions.md)查看

docs/hardware/zh/tang/tang-mega-138k/mega-138k.md

@@ -0,0 +1,296 @@
+---
+title: Tang Mega 138K Dock
+keywords: FPGA, Tang, Mega, 138K
+update:
+  - date: 2024-06-25
+    version: v0.1
+    author: Serika
+    content:
+      - 新建文档
+---
+
+
+## 产品概述
+
+**Tang Mega 138K** 使用 22nm 制程 **GW5AST-LV138P484A** FPGA 芯片，具有 138240 个查找表单元和近 300 个 DSP 单元。含有八个速度范围在 270Mbps ~ 6.6Gbps 高速收发器，适合用于 PCIE 等高速口传递数据。此外，芯片含有硬核 PCIE，在使用 PCIE 的时候消耗更好的资源，并且得到更佳的性能。适用于高速通信、协议转换、高性能计算等场合。
+相比138K Pro Dock，138K Dock具有更小的体积和更低的价格，并用USB3.0代替了SFP收发器。这不仅有效的降低了高速通讯的成本，还带来了更好的通用性。
+
+淘宝购买链接：[点我](https://item.taobao.com/item.htm?id=740536508140)
+
+## 板卡特点
+
+- 大容量 LUT
+- 大容量 内存
+- PCIE2.0 x 4
+- USB3.0 x1
+- RISCV 硬核
+
+## 产品外观
+
+<img src="./assets/mega_138k_top.png" width="45%">
+
+## 硬件参数
+
+### 核心板参数
+
+<table>
+	<thead>
+		<tr>
+			<th style="text-align:center">项目</th>
+			<th style="text-align:center">参数</th>
+			<th style="text-align:center">补充</th>
+		</tr>
+	</thead>
+	<tbody>
+		<tr>
+			<td style="text-align:left">FPGA 芯片</td>
+			<td style="text-align:left"><a href="https://www.gowinsemi.com.cn/prod_view.aspx?TypeId=74&FId=t3:10:3&Id=188#GW5AST">GW5AST-LV138PG484A</a>
+			</td>
+			<td style="text-align:left">
+				<table>
+					<tr>
+						<td>逻辑单元(LUT4)</td>
+						<td>138240</td>
+					</tr>
+					<tr>
+						<td>寄存器(FF)</td>
+						<td>138240</td>
+					</tr>
+					<tr>
+						<td>分布式静态随机存储器S-SRAM(Kbits)</td>
+						<td>1080</td>
+					</tr>
+					<tr>
+						<td>块状静态随机存储器B-SRAM(Kbits)</td>
+						<td>6120</td>
+					</tr>
+					<tr>
+						<td>块状静态随机存储器数目B-SRAM(个)</td>
+						<td>340</td>
+					</tr>
+					<tr>
+						<td>乘法器(18x18 Multiplier)</td>
+						<td>298</td>
+					</tr>
+					<tr>
+						<td>锁相环(PLLs)</td>
+						<td>12</td>
+					</tr>
+                    <tr>
+                        <td>全局时钟</td>
+                        <td>16</td>
+                    </tr>
+                    <tr>
+                        <td>高速时钟</td>
+                        <td>24</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers</td>
+                        <td>4</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers 速率</td>
+                        <td>270Mbps-6.6Gbps</td>
+                    </tr>
+                    <tr>
+                        <td>PCIE 硬核</td>
+                        <td>1个<br>速度可选 x1, x2, x4, x8 PCIe 2.0</td>
+                    </tr>
+                    <tr>
+                        <td>LVDS (Gbps)</td>
+                        <td>1.25</td>
+                    </tr>
+                    <tr>
+                        <td>DDR3 (Mbps)</td>
+                        <td>1333</td>
+                    </tr>
+                        <td>硬核处理器</td>
+                        <td>RiscV AE350_SOC</td>
+                    </tr>
+                    <tr>
+                        <td>ADC</td>
+                        <td>2</td>
+                    </tr>
+					<tr>
+						<td>IO Bank 总数</td>
+						<td>10</td>
+					</tr>
+				</table>
+			</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">内存</td>
+			<td style="text-align:left">1GB DDR3</td>
+			<td style="text-align:left">512MB x 2</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Flash</td>
+			<td style="text-align:left">128Mbits Flash x 1</td>
+			<td style="text-align:left">查看 <a href="#burn_flash">烧录到Flash</a></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">调试接口</td>
+			<td style="text-align:left">Jtag + Uart</td>
+			<td style="text-align:left">JST SH1.0 8Pins 连接器</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">整体封装</td>
+			<td style="text-align:left">35mm x 45mm 大小</td>
+			<td style="text-align:left">BTB连接器连接核心板和底板</td>
+		</tr>
+	</tbody>
+</table>
+
+### 底板参数
+
+| 项目                 | 数量 | 备注                                              |
+| :------------------  | ---- | ------------------------------------------------- |
+| LED                  | 4+8  | 4个电量指示灯+8个PMOD外接                          |
+| WS2812               | 1    | 与 aRGB 灯带连接器同数据引脚                       |
+| Buttons              | 3+1  | 3个用户按键+1个reconfig按键                        |
+| PCIe                 | 1    | 4-lane @ 5Gbps，CH569 16bit HSPI                  |
+| USB3                 | 2    | SuperSpeed @ 5Gbps                                |
+| GbE                  | 1    | 千兆以太网                                        |
+| DVI RX               | 1    | 与 DVI TX 互相占用                                |
+| DVI TX               | 1    | 与 DVI RX 互相占用                                |
+| PMOD                 | 2    | 与上边的40P排针和DVP复用                          |
+| ADC                  | 2    | 2个差分输入通道                                   |
+| aRGB CONN.           | 1    | 与 WS2812 同数据引脚                              |
+| DVP Interface        | 1    | 与上侧的40P排针和PMOD复用                         |
+| RGB Interface        | 1    | 支持 RGB888 屏幕                                  |
+| MIC ARRAY Interface  | 1    | 支持连接 Sipeed 6+1 麦克风阵列                    |
+| SD Slot              | 1    | 1-bit SDIO/MMC 或SPI模式                          |
+| BATT CONN.           | 1    | 支持3.7V锂电池，自带充放电管理                     |
+| PWM FAN CONN.        | 1    | 支持5V PWM风扇，支持测速                           |
+| Speaker CONN.        | 2    | 支持两个3W扬声器                                   |
+| 3.5mm Headphone CONN.| 1    | 立体声输出，无Mic                                  |
+| MS5351               | 1    | 为 Serdes 提供 RefClk；通过底板上的串口来控制输出  |
+| USB JTAG & UART      | 1    | 支持烧录 FPGA，并且提供串口功能                    |
+| 40P 排针             | 2    | 上侧的40P排针与PMOD和DVP复用                       |
+| 电源开关             | 1    | 长按2s切换开关机状态                               |
+| 12V DC               | 1    | 规格DC5521                                        |
+
+## 硬件资料
+
+[板卡规格书](https://dl.sipeed.com/shareURL/TANG/Mega_138K/01_Specification)
+[板卡原理图](https://dl.sipeed.com/shareURL/TANG/Mega_138K/02_Schematic)
+[PCB BOM](https://dl.sipeed.com/shareURL/TANG/Mega_138K/03_Designator_drawing)
+[板卡尺寸图](https://dl.sipeed.com/shareURL/TANG/Mega_138K/04_Mechanical_drawing)
+[板卡 3D 模型](https://dl.sipeed.com/shareURL/TANG/Mega_138K/05_3D_file)
+[部分芯片手册](https://dl.sipeed.com/shareURL/TANG/Mega_138K/07_Datasheet)
+
+## 上手使用
+注意138K目前未被教育版支持，需要下载 V1.9.9 或更新版本的商业版IDE使用。  
+Lic 可以在高云官网申请，或者使用Sipeed提供的在线Lic服务，在IDE中选择Float Lic，填写以下信息即可：
+~~~
+ip: 106.55.34.119
+port: 10559
+~~~
+如果上面的IP不能工作, 尝试使用 "gowinlic.sipeed.com" 域名对应的IP.
+
+安装 IDE [点我](https://wiki.sipeed.com/hardware/zh/tang/Tang-Nano-Doc/get_started/install-the-ide.html)
+
+
+例程代码 [github](https://github.com/sipeed/TangMega-138K-example)
+
+### 其他学习资源
+
+- 在线免费教程：[Verilog 教程](https://www.runoob.com/w3cnote/verilog-tutorial.html)（学习Verilog）
+- 在线免费 FPGA 教程：[Verilog](https://www.asic-world.com/verilog/index.html) （英文网站）
+- Verilog 刷题网站：[HDLBits](https://hdlbits.01xz.net/wiki/Main_Page)（英文网站）
+- 在线高云半导体可参考视频教程：[点击这里](http://www.gowinsemi.com.cn/video_complex.aspx?FId=n15:15:26)
+
+## 交流方式
+
+- **交流论坛: [maixhub.com/discussion](https://maixhub.com/discussion)**
+- **QQ 交流群：[834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)**
+- 直接本页下方留言
+- 前往**[Github项目主页](https://github.com/sipeed/TangMega-138K-example)**提交issue
+- 商业邮箱 : [support@sipeed.com](support@sipeed.com)
+
+## 注意事项
+
+<table>
+    <tr>
+        <th>事项</th>
+        <th>注意事项</th>
+    </tr>
+    <tr>
+        <td>芯片型号</td>
+        <td>Tang Mega 138K 使用的 FPGA 芯片具体型号是 <b>GW5AST-LV138PG484A</b>  <br>在 IDE 中选择封装型号 <b>PBG484A</b></br></td>
+    </tr>
+    <tr>
+        <td>静电</td>
+        <td>请避免静电打到 PCBA 上；接触 PCBA 之前请把手的静电释放掉</td>
+    </tr>
+    <tr>
+        <td>容忍电压</td>
+        <td> 使用 GPIO 排针引脚进行外部通信时，要确保 IO 电压是 <b>3.3V</b>，过高的电压会永久损坏 PCBA </td>
+    </tr>
+    <tr>
+        <td>FPC 座子</td>
+        <td>在连接 FPC 软排线的时候，请确保排线无偏侈地完整地插入到排线中</td>
+    </tr>
+    <tr>
+        <td>PCIe 金手指</td>
+        <td>在测试 PCIe 金手指时候，确保是主机端与板卡都处于关机或者未通电的状态，否则可能会因为插入过程中的易位导致金手指短路。</td>
+    </tr>
+    <tr>
+        <td>插拔</td>
+        <td>请完全断电后才进行插拔操作</td>
+    </tr>
+    <tr>
+        <td>避免短路</td>
+        <td>请在上电过程中，避免任何液体和金属触碰到 PCBA 上的元件的焊盘，否则会导致路，烧毁 PCBA</td>
+    </tr>
+</table>
+
+## 联系
+
+Tang Mega 138K 可以在多种场景实现客户不同方面的需要，技术支持和商业合作请联系邮箱 [support@sipeed.com](support@sipeed.com)
+
+## 常见问题
+
+### 板子通电后底板只亮了四个指示灯，SOM的指示灯没亮
+
+1. 请检查是否开启了板子的电源，**PWR按键**（HDMI接口旁边）长按2S开启电源；
+
+### 板子通电后，底板Battery-Indicator指示灯在闪烁
+
+1. 正常现象，通常是最后一颗LED（靠近12V DC连接器）在闪烁；
+2. 当板子连接3.7V锂电池时，这些LED将作为电池电量指示灯。
+
+### 长按PWR按钮 2s 后，底板指示灯全部熄灭又依次亮起
+
+1. 检查自己的供电方式，出现这种情况意味着供电能力不足；
+2. 解决方案（任选一种）：
+    a. 同时连接板子的**USB-3.0**和**USB-DEBUG**进行供电，即双5V USB电源供电；
+    b. 连接12V DC电源对板子进行供电，如使用配件中的USB-C转12V DC连接器，则需要连接有12V输出能力的PD电源；
+    c. 连接3.7V锂电池对板子进行供电，注意电池电压必须≥3.6V且连续放电能力≥600mA。
+
+### IDE找不到型号GW5AST-LV138PG484A
+
+1. 教育版不支持138K，请更换商业版。如下图所示即为教育版（不支持138K）；
+<img src="../assets/questions/no_model_in_IDE.png" width="35%">
+
+2. IDE版本过老，必须更新IDE ≥ 1.9.9。
+
+### 如何下载到外部 FLASH {#burn_flash}
+
+1. 进行如下选项设置：
+
+<img src="./assets/flash_mode.png" alt="flash_mode" width=35%>
+
+2. 检查拨码开关的位置，正确的位置如下图所示：
+
+<img src="./assets/dip-key_defualt.png" alt="dip-key_defualt" width=35%>
+
+### 烧录后没反应或者引脚现象不对
+
+1. 首先确定IDE选择了正确的型号 **GW5AST-LV138PG484AC1/10**，下图中的每一个参数都要求一致；
+
+<img src="./assets/partno_138K.png" alt="device_choose" width=35%>
+
+2. 然后检查自己的代码和对应的仿真波形是否满足要求，使用云源软件（GOWIN IDE）的GAO工具可以进行片上仿真。更多详情请参考GOWIN文档[SUG100](https://cdn.gowinsemi.com.cn/SUG100-4.0_Gowin%E4%BA%91%E6%BA%90%E8%BD%AF%E4%BB%B6%E7%94%A8%E6%88%B7%E6%8C%87%E5%8D%97.pdf)中关于GAO工具的描述。
+
+### 更多问题及其解决办法前往[相关问题](./../Tang-Nano-Doc/questions.md)查看

docs/hardware/zh/tang/tang-mega-60k/mega-60k.md

@@ -0,0 +1,229 @@
+---
+title: Tang Mega 60K Dock
+keywords: FPGA, Tang, Mega, 60K
+update:
+  - date: 2024-06-25
+    version: v0.1
+    author: Serika
+    content:
+      - 新建文档
+---
+
+## 产品概述
+
+TBD
+
+购买链接：[淘宝](https://sipeed.taobao.com)
+
+## 板卡特点
+
+TBD
+
+## 产品外观
+
+TBD
+
+## 硬件参数
+
+### 核心板参数
+
+<table>
+	<thead>
+		<tr>
+			<th style="text-align:center">项目</th>
+			<th style="text-align:center">参数</th>
+			<th style="text-align:center">补充</th>
+		</tr>
+	</thead>
+	<tbody>
+		<tr>
+			<td style="text-align:left">FPGA 芯片</td>
+			<td style="text-align:left"><a href="https://www.gowinsemi.com.cn/prod_view.aspx?TypeId=74&FId=t3:10:3&Id=188#GW5AT">GW5AT-LV60PG484A</a>
+			</td>
+			<td style="text-align:left">
+				<table>
+					<tr>
+						<td>逻辑单元(LUT4)</td>
+						<td>59904</td>
+					</tr>
+					<tr>
+						<td>寄存器(FF)</td>
+						<td>59904</td>
+					</tr>
+					<tr>
+						<td>分布式静态随机存储器S-SRAM(Kbits)</td>
+						<td>468</td>
+					</tr>
+					<tr>
+						<td>块状静态随机存储器B-SRAM(Kbits)</td>
+						<td>2124</td>
+					</tr>
+					<tr>
+						<td>块状静态随机存储器数目B-SRAM(个)</td>
+						<td>118</td>
+					</tr>
+					<tr>
+						<td>乘法器(18x18 Multiplier)</td>
+						<td>118</td>
+					</tr>
+					<tr>
+						<td>锁相环(PLLs)</td>
+						<td>8</td>
+					</tr>
+                    <tr>
+                        <td>全局时钟</td>
+                        <td>16</td>
+                    </tr>
+                    <tr>
+                        <td>高速时钟</td>
+                        <td>20</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers</td>
+                        <td>4</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers 速率</td>
+                        <td>270Mbps-12.5Gbps</td>
+                    </tr>
+                    <tr>
+                        <td>PCIE 硬核</td>
+                        <td>1个<br>速度可选 x1, x2, x4, x8 PCIe 2.0</td>
+                    </tr>
+                    <tr>
+                        <td>LVDS (Gbps)</td>
+                        <td>1.25</td>
+                    </tr>
+                    <tr>
+                        <td>DDR3 (Mbps)</td>
+                        <td>1333</td>
+                    </tr>
+                    <tr>
+                        <td>MIPI D-PHY硬核</td>
+                        <td>2.5Gbps（RX），<br>8个数据通道，<br>2个时钟通道</td>
+                    </tr>
+                    <tr>
+                        <td>硬核处理器</td>
+                        <td>RiscV AE350_SOC</td>
+                    </tr>
+                    <tr>
+                        <td>ADC</td>
+                        <td>2</td>
+                    </tr>
+					<tr>
+						<td>I/O Bank 总数</td>
+						<td>11</td>
+					</tr>
+				</table>
+			</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">内存</td>
+			<td style="text-align:left">1GB DDR3</td>
+			<td style="text-align:left">512MB x 2</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Flash</td>
+			<td style="text-align:left">128Mbits Flash x 1</td>
+			<td style="text-align:left">查看 <a href="#burn_flash">烧录到Flash</a></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">调试接口</td>
+			<td style="text-align:left">Jtag + Uart</td>
+			<td style="text-align:left">JST SH1.0 8Pins 连接器</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">整体封装</td>
+			<td style="text-align:left">35mm x 45mm 大小</td>
+			<td style="text-align:left">BTB连接器连接核心板和底板</td>
+		</tr>
+	</tbody>
+</table>
+
+### 底板参数
+
+TBD
+
+## 硬件资料
+
+[板卡规格书](https://dl.sipeed.com/shareURL/TANG/Mega_60K/01_Specification)
+[板卡原理图](https://dl.sipeed.com/shareURL/TANG/Mega_60K/02_Schematic)
+[PCB BOM](https://dl.sipeed.com/shareURL/TANG/Mega_60K/03_Designator_drawing)
+[板卡尺寸图](https://dl.sipeed.com/shareURL/TANG/Mega_60K/04_Mechanical_drawing)
+[板卡 3D 模型](https://dl.sipeed.com/shareURL/TANG/Mega_60K/05_3D_file)
+[部分芯片手册](https://dl.sipeed.com/shareURL/TANG/Mega_60K/07_Datasheet)
+
+## 上手使用
+注意60K目前未被教育版支持，需要下载 V1.9.9.04 或更新版本的商业版IDE使用。  
+Lic 可以在高云官网申请，或者使用Sipeed提供的在线Lic服务，在IDE中选择Float Lic，填写以下信息即可：
+~~~
+ip: 106.55.34.119
+port: 10559
+~~~
+如果上面的IP不能工作, 尝试使用 "gowinlic.sipeed.com" 域名对应的IP.
+
+安装 IDE [点我](https://wiki.sipeed.com/hardware/zh/tang/Tang-Nano-Doc/get_started/install-the-ide.html)
+
+
+例程代码 [github](https://github.com/sipeed/TangMega-60K-example)
+
+### 其他学习资源
+
+- 在线免费教程：[Verilog 教程](https://www.runoob.com/w3cnote/verilog-tutorial.html)（学习Verilog）
+- 在线免费 FPGA 教程：[Verilog](https://www.asic-world.com/verilog/index.html) （英文网站）
+- Verilog 刷题网站：[HDLBits](https://hdlbits.01xz.net/wiki/Main_Page)（英文网站）
+- 在线高云半导体可参考视频教程：[点击这里](http://www.gowinsemi.com.cn/video_complex.aspx?FId=n15:15:26)
+
+## 交流方式
+
+- **交流论坛: [maixhub.com/discussion](https://maixhub.com/discussion)**
+- **QQ 交流群：[834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)**
+- 直接本页下方留言
+- 商业邮箱 : [support@sipeed.com](support@sipeed.com)
+
+## 注意事项
+
+<table>
+    <tr>
+        <th>事项</th>
+        <th>注意事项</th>
+    </tr>
+    <tr>
+        <td>芯片型号</td>
+        <td>Tang Mega 60K 使用的 FPGA 芯片具体型号是 <b>GW5AT-LV60PG484A</b> <br>在 IDE 中选择封装型号 <b>PBG484A</b></br></td>
+    </tr>
+    <tr>
+        <td>静电</td>
+        <td>请避免静电打到 PCBA 上；接触 PCBA 之前请把手的静电释放掉</td>
+    </tr>
+    <tr>
+        <td>容忍电压</td>
+        <td> 使用 GPIO 排针引脚进行外部通信时，要确保 IO 电压是 3.3V，过高的电压会永久损坏 PCBA </td>
+    </tr>
+    <tr>
+        <td>FPC 座子</td>
+        <td>在连接 FPC 软排线的时候，请确保排线无偏侈地完整地插入到排线中</td>
+    </tr>
+    <tr>
+        <td>PCIe 金手指</td>
+        <td>在测试 PCIe 金手指时候，确保是主机端与板卡都处于关机或者未通电的状态，否则可能会因为插入过程中的易位导致金手指短路。</td>
+    </tr>
+    <tr>
+        <td>插拔</td>
+        <td>请完全断电后才进行插拔操作</td>
+    </tr>
+    <tr>
+        <td>避免短路</td>
+        <td>请在上电过程中，避免任何液体和金属触碰到 PCBA 上的元件的焊盘，否则会导致路，烧毁 PCBA</td>
+    </tr>
+</table>
+
+## 联系
+
+Tang Mega 60K 可以在多种场景实现客户不同方面的需要，技术支持和商业合作请联系邮箱 [support@sipeed.com](support@sipeed.com)
+
+## 常见问题
+
+### 板子通电后电源灯没亮
+
+TBD

docs/hardware/zh/tang/tang-primer-15k/primer-15k.md

@@ -0,0 +1,249 @@
+---
+title: Tang Primer 15K Dock
+keywords: FPGA, Tang, Primer, 15K
+update:
+  - date: 2024-06-25
+    version: v0.1
+    author: Serika
+    content:
+      - 新建文档
+---
+## 概述
+
+TBD
+
+购买链接：[淘宝](https://sipeed.taobao.com)
+
+
+
+
+## 核心板概览
+
+TBD
+
+
+## 基础参数
+
+<table>
+	<thead>
+		<tr>
+			<th style="text-align:center">项目</th>
+			<th style="text-align:center">参数</th>
+			<th style="text-align:center">补充</th>
+		</tr>
+	</thead>
+	<tbody>
+		<tr>
+			<td style="text-align:left">FPGA 芯片</td>
+			<td style="text-align:left"><a href="https://www.gowinsemi.com.cn/prod_view.aspx?TypeId=74&FId=t3:10:3&Id=188#G15K">GW5ART-15MG132P</a>
+			</td>
+			<td style="text-align:left">
+				<table>
+					<tr>
+						<td>逻辑单元(LUT4)</td>
+						<td>15120</td>
+					</tr>
+					<tr>
+						<td>寄存器(FF)</td>
+						<td>15120</td>
+					</tr>
+					<tr>
+						<td>分布式静态随机存储器S-SRAM(bits)</td>
+						<td>118125</td>
+					</tr>
+					<tr>
+						<td>块状静态随机存储器B-SRAM(bits)</td>
+						<td>630</td>
+					</tr>
+					<tr>
+						<td>块状静态随机存储器数目B-SRAM(个)</td>
+						<td>35</td>
+					</tr>
+					<tr>
+						<td>乘法器(18x18 Multiplier)</td>
+						<td>28+12</td>
+					</tr>
+					<tr>
+						<td>锁相环(PLLs)</td>
+						<td>2</td>
+					</tr>
+					    <td>全局时钟</td>
+                        <td>16</td>
+                    </tr>
+                    <tr>
+                        <td>高速时钟</td>
+                        <td>2</td>
+                    </tr>
+					                    <tr>
+                        <td>Transceivers</td>
+                        <td>8</td>
+                    </tr>
+                    <tr>
+                        <td>Transceivers 速率</td>
+                        <td>270Mbps-12.5Gbps</td>
+                    </tr>
+                    <tr>
+                        <td>PCIE 硬核</td>
+                        <td>1个<br>速度可选 x1, x2, x4, x8 PCIe 2.0</td>
+                    </tr>
+                    <tr>
+                        <td>LVDS (Gbps)</td>
+                        <td>1.25</td>
+                    </tr>
+					    <td>MIPI D-PHY硬核</td>
+                        <td>2.5Gbps（RX/TX），<br>4个数据通道，<br>1个时钟通道</td>
+                    </tr>
+                    <tr>
+                        <td>MIPI C-PHY硬核</td>
+                        <td>2.5Gbps（RX/TX），<br>=5.75Gbps,RX/TX<br>3个三线数据通道</td>
+                    </tr>
+					<tr>
+                        <td>PSRAM</td>
+                        <td>64Mb @ 667MHz</td>
+                    </tr>
+                    <tr>
+                        <td>ADC</td>
+                        <td>1</td>
+                    </tr>
+					<tr>
+						<td>GPIO Bank 总数</td>
+						<td>4</td>
+				</table>
+			</td>
+		</tr>
+		<tr>
+			<td style="text-align:left">Flash</td>
+			<td style="text-align:left">64Mb</td>
+			<td style="text-align:left">查看 <a href="#burn_flash">烧录到Flash</a></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">整体封装</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">普通IO</td>
+			<td style="text-align:left"> 53</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left"> MIPI IO </td>
+			<td style="text-align:left"> 10</td>
+			<td style="text-align:left"></td>
+		</tr>
+	</tbody>
+</table>
+
+## Dock 底板产品图
+
+
+TBD
+
+
+## 板卡参数
+
+<table>
+	<thead>
+		<tr>
+			<th style="text-align:center">项目</th>
+			<th style="text-align:center">参数</th>
+			<th style="text-align:center">备注</th>
+		</tr>
+	</thead>
+	<tbody>
+		<tr>
+			<td style="text-align:left">调试器</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">USB-A</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left"> IO插针 </td>
+			<td style="text-align:left"> TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left"> PMOD </td>
+			<td style="text-align:left"> TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">按键</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+		<tr>
+			<td style="text-align:left">尺寸</td>
+			<td style="text-align:left">TBD</td>
+			<td style="text-align:left"></td>
+		</tr>
+	</tbody>
+</table>
+
+## 硬件资料
+
+规格书、原理图、尺寸图等均可在这里找到：[点击这里](https://dl.sipeed.com/shareURL/TANG/Primer_15K)
+
+- [板卡规格书](https://dl.sipeed.com/shareURL/TANG/Primer_15K/01_Specification)
+- [板卡原理图](https://dl.sipeed.com/shareURL/TANG/Primer_15K/02_Schematic)
+- [板卡点位图](https://dl.sipeed.com/shareURL/TANG/Primer_15K/03_Designator_drawing)
+- [板卡尺寸图](https://dl.sipeed.com/shareURL/TANG/Primer_15K/04_Mechanical_drawing)
+- [3D 模型文件](https://dl.sipeed.com/shareURL/TANG/Primer_15K/05_3D_file)
+- [核心板封装](https://dl.sipeed.com/shareURL/TANG/Primer_15K/06_PCB_Lib) 
+- [芯片部分资料](https://dl.sipeed.com/shareURL/TANG/Primer_15K/07_Datasheet)
+- [走线长度表](https://dl.sipeed.com/shareURL/TANG/Primer_15K/08_Pin_Length_table)
+
+
+## 上手简明
+
+`准备开发环境` -> `学习相关语法` -> `查看开箱指南` -> `基础代码编写` -> `查看官方文档`
+
+1. 安装 IDE ：[点击这里](./../Tang-Nano-Doc/get_started/install-the-ide.md)
+
+2. 查看 [上手指南](https://wiki.sipeed.com/hardware/zh/tang/tang-primer-20k/start.html) 来避免一些问题，并且从那里面可以开始进行代码实战。
+
+3. 如果进行完上面的点灯操作后后感觉有压力，可以自己查漏补缺：
+   可以在下面的这些网站学习 Verilog:
+	+ 在线免费教程：[Verilog 教程](https://www.runoob.com/w3cnote/verilog-tutorial.html)（学习Verilog）
+	+ 在线免费 FPGA 教程：[Verilog](https://www.asic-world.com/verilog/index.html) （英文网站）
+	+ Verilog 刷题网站：[HDLBits](https://hdlbits.01xz.net/wiki/Main_Page)（英文网站）
+	+ 在线高云半导体可参考视频教程：[点击这里](http://www.gowinsemi.com.cn/video_complex.aspx?FId=n15:15:26)
+
+   对 IDE 使用有疑问的话，可以查看官方的一些文档来熟悉相关内容
+   - [SUG100-2.6_Gowin云源软件用户指南.pdf](http://cdn.gowinsemi.com.cn/SUG100-2.6_Gowin%E4%BA%91%E6%BA%90%E8%BD%AF%E4%BB%B6%E7%94%A8%E6%88%B7%E6%8C%87%E5%8D%97.pdf)
+   - [SUG949-1.1_Gowin_HDL编码风格用户指南.pdf](http://cdn.gowinsemi.com.cn/SUG949-1.1_Gowin_HDL%E7%BC%96%E7%A0%81%E9%A3%8E%E6%A0%BC%E7%94%A8%E6%88%B7%E6%8C%87%E5%8D%97.pdf)
+   - <a href="http://cdn.gowinsemi.com.cn/UG286-1.9.1_Gowin%E6%97%B6%E9%92%9F%E8%B5%84%E6%BA%90(Clock)%E7%94%A8%E6%88%B7%E6%8C%87%E5%8D%97.pdf">UG286-1.9.1_Gowin时钟资源(Clock)用户指南.pdf</a>
+   - [SUG940-1.3_Gowin设计时序约束用户指南.pdf](http://cdn.gowinsemi.com.cn/SUG940-1.3_Gowin%E8%AE%BE%E8%AE%A1%E6%97%B6%E5%BA%8F%E7%BA%A6%E6%9D%9F%E7%94%A8%E6%88%B7%E6%8C%87%E5%8D%97.pdf)
+   - [SUG502-1.3_Gowin_Programmer用户指南.pdf](http://cdn.gowinsemi.com.cn/SUG502-1.3_Gowin_Programmer%E7%94%A8%E6%88%B7%E6%8C%87%E5%8D%97.pdf)
+   - [SUG114-2.5_Gowin在线逻辑分析仪用户指南.pdf](http://cdn.gowinsemi.com.cn/SUG114-2.5_Gowin%E5%9C%A8%E7%BA%BF%E9%80%BB%E8%BE%91%E5%88%86%E6%9E%90%E4%BB%AA%E7%94%A8%E6%88%B7%E6%8C%87%E5%8D%97.pdf)
+
+   上面的所有文档都已经打包进了下载站[点我跳转](https://dl.sipeed.com/shareURL/TANG/Primer_20K/07_Chip_manual/CN/%E9%80%9A%E7%94%A8%E6%8C%87%E5%BC%95)，需要的话可以点击压缩包全都下载下来。
+
+## 例程汇总
+注意15K需要使用 V1.9.9.04 或更新的IDE版本。
+http://www.gowinsemi.com.cn/faq.aspx
+
+### 公开例程
+github 链接： https://github.com/sipeed/TangPrimer-15K-example
+
+
+## 交流方式
+
+- **交流论坛: [maixhub.com](maixhub.com/discussion)**
+- **QQ 交流群：[834585530](https://jq.qq.com/?_wv=1027&k=wBb8XUan)**
+- 直接本页下方留言
+- 商业邮箱 : [support@sipeed.com](support@sipeed.com)
+
+
+
+## 相关问题
+
+### TBD
+
+TBD
+
+

docs/hardware/zh/tang/tang-primer-25k/primer-25k.md

@@ -14,7 +14,7 @@ Tang Primer 25K 是基于 [GW5A-LV25MG121](http://www.gowinsemi.com.cn/prod_view
     <img src="./assets/25k_dock_45.jpg" width=45%>
 </div>
 
-购买链接：[淘宝](https://item.taobao.com/item.htm?spm=a1z10.5-c-s.w4002-24984936573.29.19b22db2a329yr&id=746293292946)
+购买链接：[淘宝](https://item.taobao.com/item.htm?id=746293292946)
 
 
 

layout/locales/en/LC_MESSAGES/messages.po

@@ -4,61 +4,61 @@ msgstr ""
 
 #: home.html:93
 msgid "/static/home/banner_maixcam.jpg"
-msgstr "/static/home/banner_maixcam_en.jpg"
+msgstr ""
 
 #: home.html:96 home.html:113 home.html:126 home.html:139 home.html:152
 #: home.html:165 home.html:178 home.html:191 licheepi.html:217
 #: licheepi.html:238 licheepi.html:254 licheepi.html:275 licheepi.html:291
 #: licheepi.html:307 maix.html:163 maix.html:180 maix.html:197 maix.html:237
 #: maix.html:254 maix.html:275 maix.html:292 maixsense.html:40
-#: maixsense.html:56 others.html:38 tang.html:137 tang.html:153 tang.html:169
-#: tang.html:185 tang.html:201 tang.html:217
+#: maixsense.html:56 others.html:38 tang.html:167 tang.html:183 tang.html:199
+#: tang.html:215 tang.html:231 tang.html:247 tang.html:263 tang.html:279
+#: tang.html:295
 msgid "文档"
 msgstr "Documentation"
 
 #: home.html:97
 msgid "/maixcam"
-msgstr "/en/maixcam"
+msgstr ""
 
 #: home.html:101
 msgid "/maixpy"
-msgstr "/en/maixpy"
+msgstr ""
 
 #: home.html:104 home.html:117 home.html:130 home.html:143 home.html:156
 #: home.html:169 home.html:182 home.html:195 licheepi.html:221
 #: licheepi.html:242 licheepi.html:258 licheepi.html:279 licheepi.html:295
 #: licheepi.html:311 maix.html:167 maix.html:241 maix.html:262 maix.html:279
 #: maix.html:296 maixsense.html:44 maixsense.html:60 others.html:42
-#: tang.html:141 tang.html:157 tang.html:173 tang.html:189 tang.html:205
-#: tang.html:221
+#: tang.html:171 tang.html:187 tang.html:203 tang.html:219 tang.html:235
+#: tang.html:251 tang.html:267 tang.html:283 tang.html:299
 msgid "购买"
 msgstr "Buy"
 
 #: home.html:105
+#, fuzzy
 msgid "https://item.taobao.com/item.htm?id=784724795837"
-msgstr "https://www.aliexpress.com/store/911876460"
+msgstr "https://www.aliexpress.us/item/325680633"
 
 #: home.html:110
 msgid "/static/home/LicheeRV-Nano.jpg"
-msgstr "/static/home/LicheeRV-nano_en.jpg"
+msgstr ""
 
 #: home.html:118 licheepi.html:243
 msgid "https://item.taobao.com/item.htm?id=764939520376"
 msgstr "https://www.aliexpress.us/item/325680633"
 
 #: home.html:123
-#, fuzzy
 msgid "/static/home/LonganPi3H.jpg"
-msgstr "/static/home/maixiii_axpi_en.jpg"
+msgstr ""
 
 #: home.html:131 licheepi.html:280
 msgid "https://item.taobao.com/item.htm?ft=t&id=758221950525"
 msgstr "https://www.aliexpress.us/item/100500639"
 
 #: home.html:136
-#, fuzzy
 msgid "/static/home/console-4A.jpg"
-msgstr "/static/home/maixiii_axpi_en.jpg"
+msgstr ""
 
 #: home.html:183 home.html:196 others.html:43
 msgid "https://item.taobao.com/item.htm?id=737788586308"
@@ -70,19 +70,19 @@ msgstr "Product News"
 
 #: home.html:209
 msgid "Maix AI 视觉"
-msgstr "Maix AI Vision"
+msgstr "Maix Vision Series"
 
 #: home.html:221
 msgid "MaixSense 传感器"
-msgstr "MaixSense Sensor"
+msgstr "MaixSense Sensor Module"
 
 #: home.html:225
 msgid "其它"
-msgstr "Others"
+msgstr "Other Products"
 
 #: licheepi.html:4
 msgid "Linux RISC-V SBC 系列"
-msgstr "Linux RISC-V SBC Series"
+msgstr "Linux ARM SBC Series"
 
 #: licheepi.html:23
 msgid "Linux ARM SBC 系列"
@@ -104,7 +104,7 @@ msgstr "CPU"
 msgid "内存"
 msgstr "memory"
 
-#: licheepi.html:69 licheepi.html:152 maix.html:90 tang.html:105
+#: licheepi.html:69 licheepi.html:152 maix.html:90 tang.html:129
 msgid "储存"
 msgstr "storage"
 
@@ -269,7 +269,7 @@ msgstr "ok"
 
 #: maix.html:140
 msgid "文档和易用性"
-msgstr ""
+msgstr "Documentation and Usability"
 
 #: maix.html:160
 msgid "RISC-V 1GHz + 1Tops NPU, 4M高清摄像头，2.3寸552x368高清电容触摸屏，完美支持全新 Maix 生态所有软件"
@@ -277,7 +277,7 @@ msgstr ""
 "RISC-V 1GHz + 1Tops NPU, 4M HD camera, 2.3-inch 552x368 HD capacitive "
 "touch screen, perfect support for all new Maix ecosystem software"
 
-#: maix.html:168
+#: maix.html:168 tang.html:284 tang.html:300
 msgid "https://sipeed.taobao.com"
 msgstr "https://www.aliexpress.com/store/911876460"
 
@@ -362,6 +362,8 @@ msgstr "Find in the left menu"
 #: others.html:35
 msgid "逻辑分析仪+CKLink+DAPLink+USB转串口 多合一指尖工具"
 msgstr ""
+"Logic Analyzer + CKLink + DAPLink + USB to Serial Port, an all-in-one "
+"fingertip tool."
 
 #: tang.html:4
 msgid "Tang FPGA 系列"
@@ -369,109 +371,205 @@ msgstr "Tang FPGA Series"
 
 #: tang.html:24
 msgid "Tang 系列板卡参数对比"
-msgstr "Tang Series Main Products Comparison"
+msgstr "Tang Series Product Comparison"
 
-#: tang.html:42
+#: tang.html:45
 msgid "芯片"
 msgstr "Chip"
 
-#: tang.html:51
+#: tang.html:57
 msgid "查找表(LUT)"
-msgstr "LUT"
+msgstr "LUT4"
 
-#: tang.html:60
+#: tang.html:69
 msgid "寄存器(FF)"
 msgstr "FF"
 
-#: tang.html:88 tang.html:90 tang.html:106 tang.html:107 tang.html:108
-#: tang.html:109 tang.html:110 tang.html:111
+#: tang.html:106 tang.html:107 tang.html:108 tang.html:110 tang.html:130
+#: tang.html:131 tang.html:132 tang.html:133 tang.html:134 tang.html:135
+#: tang.html:136 tang.html:137 tang.html:138
 msgid "板载_fpga"
 msgstr "Onboard"
 
-#: tang.html:91 tang.html:92 tang.html:93 tang.html:110 tang.html:111
+#: tang.html:111 tang.html:112 tang.html:113 tang.html:114 tang.html:137
+#: tang.html:138
 msgid "内含"
 msgstr "Inchip"
 
-#: tang.html:96
+#: tang.html:117
+#, fuzzy
 msgid "内嵌处理器"
-msgstr "Embedded CPU"
+msgstr "CPU"
 
-#: tang.html:114
+#: tang.html:141
 msgid "其他特点"
-msgstr "Features"
+msgstr "Ohter Features"
 
-#: tang.html:115
+#: tang.html:142 tang.html:144 tang.html:147
+msgid "内含 6.6G Transceivers"
+msgstr "Inchip 6.6G Transceivers"
+
+#: tang.html:142 tang.html:144 tang.html:147
+msgid "支持 PCIe 2.0 通信"
+msgstr "Support PCIe 2.0 Interface"
+
+#: tang.html:142 tang.html:144
+msgid "支持 USB3 数据传输"
+msgstr "Support USB3 SS Transmission"
+
+#: tang.html:143
 msgid "内含 12.5G Transceivers"
 msgstr "Inchip 12.5G Transceivers"
 
-#: tang.html:115
-msgid "支持 PCIE 通信"
-msgstr "Support PCIE Interface"
+#: tang.html:143
+msgid "支持 PCIe 3.0 通信"
+msgstr "Support PCIe 3.0 Interface"
 
-#: tang.html:115
+#: tang.html:143
 msgid "支持 SFP+ 数据传输"
-msgstr "Support SFP+ Transmission"
+msgstr "Support SFP+ (10G) Transmission"
 
-#: tang.html:116
+#: tang.html:144 tang.html:147
+msgid "内含 2.5G MIPI C/DPHY RX/TX"
+msgstr "2.5G MIPI C/DPHY RX/TX inside"
+
+#: tang.html:145
 msgid "内含 2.5G MIPI DPHY RX/TX"
 msgstr "2.5G MIPI DPHY RX/TX inside"
 
-#: tang.html:116
+#: tang.html:145
 msgid "支持 PMOD, 64MByte SDRAM模块"
 msgstr "Support PMOD,64MByte SDRAM Module"
 
-#: tang.html:116
+#: tang.html:145
 msgid "支持 USB手柄"
 msgstr "Support USB Joystick"
 
-#: tang.html:117
+#: tang.html:146
 msgid "丰富外设，HDMI/以太网/USB"
 msgstr "Rich peripherals, HDMI/Ethernet/USB"
 
-#: tang.html:118
+#: tang.html:147
+msgid "M.2 外形兼容"
+msgstr "M.2 Golden Fingers compatible"
+
+#: tang.html:148
 msgid "for RetroGame ~"
-msgstr "for RetroGame ~"
+msgstr ""
 
-#: tang.html:119
+#: tang.html:149
 msgid "for RISCV softcore"
-msgstr "for RISCV softcore"
+msgstr ""
 
-#: tang.html:120
+#: tang.html:150
 msgid "GOAI~"
-msgstr "GOAI~"
+msgstr ""
 
-#: tang.html:134
+#: tang.html:164
+msgid "小体积的大容量 FPGA 开发板"
+msgstr "Campact High-capacity FPGA Board"
+
+#: tang.html:168
+msgid "/hardware/zh/tang/tang-mega-138k/mega-138k.html"
+msgstr "/hardware/en/tang/tang-mega-138k/mega-138k.html"
+
+#: tang.html:172
+msgid "https://item.taobao.com/item.htm?id=808924746746"
+msgstr "https://www.aliexpress.com/item/3256807078990410.html"
+
+#: tang.html:180
 msgid "可以高速通信的大容量 FPGA 开发板"
 msgstr "High Speed Interface FPGA Board"
 
-#: tang.html:150
+#: tang.html:184
+msgid "/hardware/zh/tang/tang-mega-138k/mega-138k-pro.html"
+msgstr "/hardware/en/tang/tang-mega-138k/mega-138k-pro.html"
+
+#: tang.html:188
+msgid "https://item.taobao.com/item.htm?id=740536508140"
+msgstr "https://www.aliexpress.com/item/1005006080116482.html"
+
+#: tang.html:196
 msgid "自由拓展的 FPGA 开发板"
 msgstr "Free Expansion FPGA board"
 
-#: tang.html:166
+#: tang.html:200
+msgid "/hardware/zh/tang/tang-primer-25k/primer-25k.html"
+msgstr "/hardware/en/tang/tang-primer-25k/primer-25k.html"
+
+#: tang.html:204
+msgid "https://item.taobao.com/item.htm?id=746293292946"
+msgstr "https://www.aliexpress.com/item/1005006224593018.html"
+
+#: tang.html:212
 msgid "自带多种外设接口的 FPGA 开发板"
 msgstr "Mutiple Interfaces FPGA Board"
 
-#: tang.html:182
+#: tang.html:216
+msgid "/hardware/zh/tang/tang-primer-20k/primer-20k.html"
+msgstr "/hardware/en/tang/tang-primer-20k/primer-20k.html"
+
+#: tang.html:220
+msgid "https://item.taobao.com/item.htm?id=680099020807"
+msgstr "https://www.aliexpress.com/item/1005004653308809.html"
+
+#: tang.html:228
 msgid "适用于模拟复古游戏机的 FPGA 开发板"
 msgstr "Retro Games Friendly FPGA Board"
 
-#: tang.html:198
+#: tang.html:232
+msgid "/hardware/zh/tang/tang-nano-20k/nano-20k.html"
+msgstr "/hardware/en/tang/tang-nano-20k/nano-20k.html"
+
+#: tang.html:236
+msgid "https://item.taobao.com/item.htm?id=717932028073"
+msgstr "https://www.aliexpress.com/item/1005005581148230.html"
+
+#: tang.html:244
 msgid "适合 RiscV 软核验证的 FPGA 开发板"
 msgstr "RiscV Softcore FPGA Board"
 
-#: tang.html:214
+#: tang.html:248
+msgid "/hardware/zh/tang/Tang-Nano-9K/Nano-9K.html"
+msgstr "/hardware/en/tang/Tang-Nano-9K/Nano-9K.html"
+
+#: tang.html:252
+msgid "https://item.taobao.com/item.htm?id=666055424174"
+msgstr " https://www.aliexpress.com/item/1005003803994525.html"
+
+#: tang.html:260
 msgid "芯片内部含有 MCU 的 FPGA 开发板"
 msgstr "Hardcore Inside FPGA Board"
 
+#: tang.html:264
+msgid "/hardware/zh/tang/Tang-Nano-4K/Nano-4K.html"
+msgstr "/hardware/en/tang/Tang-Nano-4K/Nano-4K.html"
+
+#: tang.html:268
+#, fuzzy
+msgid "https://item.taobao.com/item.htm?id=661994055100"
+msgstr "https://www.aliexpress.com/item/1005003152104886.html"
+
+#: tang.html:276 tang.html:292
+msgid "开发中，敬请期待。。。"
+msgstr "Comming Soon..."
+
+#: tang.html:280
+msgid "/hardware/zh/tang/tang-mega-60k/mega-60k.html"
+msgstr "/hardware/en/tang/tang-mega-60k/mega-60k.html"
+
+#: tang.html:296
+msgid "/hardware/zh/tang/tang-primer-15k/primer-15k.html"
+msgstr "/hardware/en/tang/tang-primer-15k/primer-15k.html"
+
 #~ msgid "预定"
-#~ msgstr ""
+#~ msgstr "Order"
 
 #~ msgid "带有高速通信接口的大容量 FPGA 开发板"
-#~ msgstr ""
+#~ msgstr "High-capacity FPGA board with high-speed ports"
 
 #~ msgid "尽情期待"
-#~ msgstr ""
+#~ msgstr "Coming soon"
 
 #~ msgid "了解更多"
 #~ msgstr "Learn more"
@@ -480,7 +578,7 @@ msgstr "Hardcore Inside FPGA Board"
 #~ msgstr "Linux SBC Series"
 
 #~ msgid "Linux ARM SBC 系列"
-#~ msgstr ""
+#~ msgstr "Linux ARM SBC Series"
 
 #~ msgid "/static/home/ax650_presell.jpg"
 #~ msgstr ""
@@ -498,44 +596,197 @@ msgstr "Hardcore Inside FPGA Board"
 #~ msgstr "Product documentation"
 
 #~ msgid "全新 Maix 生态"
-#~ msgstr ""
+#~ msgstr "Neo Maix ecosystem"
 
 #~ msgid "经典 Maix 系列"
-#~ msgstr ""
+#~ msgstr "Classic Maix Series"
 
 #~ msgid "全新 Maix AI 视觉系列"
-#~ msgstr "Maix AI Vision"
+#~ msgstr "Neo Maix AI Vision"
 
 #~ msgid "RISC-V 1GHz + 1Tops NPU, 4M高清摄像头，2.3寸553x368高清屏，玩美支持全新 Maix 生态所有软件"
 #~ msgstr ""
+#~ "RISC-V 1GHz + 1Tops NPU, 4M HD "
+#~ "camera, 2.3-inch 553x368 HD screen, "
+#~ "beautifully supports all new Maix "
+#~ "ecosystem software"
 
 #~ msgid "和 MaixPy 同款 API，稳定高效易上手"
-#~ msgstr ""
+#~ msgstr "With the same API as MaixPy, stable, efficient, and easy to get started"
 
 #~ msgid "C++ SDK, 和 MaixPy 同款 API，稳定高效易上手"
 #~ msgstr ""
+#~ "C++ SDK, with the same API as "
+#~ "MaixPy, stable, efficient, and easy to"
+#~ " get started"
 
 #~ msgid "Python 编程、代码运行、图像实时预览、应用打包等"
 #~ msgstr ""
+#~ "Python programming, code execution, real-"
+#~ "time image preview, application packaging, "
+#~ "etc."
 
 #~ msgid "下载"
-#~ msgstr ""
+#~ msgstr "Downloads"
 
 #~ msgid "代码编辑运行、图像预览、在线 AI 模型训练"
-#~ msgstr ""
+#~ msgstr "Code editing and execution, image preview, online AI model training"
 
 #~ msgid "代码编辑运行、图像实时预览<br>在线一键 AI 模型训练"
 #~ msgstr ""
+#~ "Code editing and execution, real-time"
+#~ " image preview, online one-click AI"
+#~ " model training"
 
 #~ msgid "软件和云平台"
-#~ msgstr ""
+#~ msgstr "Software and cloud platform"
 
 #~ msgid "工具和云平台"
-#~ msgstr ""
+#~ msgstr "Tools and cloud platform"
 
 #~ msgid "Python 语法，快速落地 AI 视觉、听觉应用"
 #~ msgstr ""
+#~ "Python syntax, quick implementation of "
+#~ "AI vision and auditory applications "
 
 #~ msgid "文档丰富度"
+#~ msgstr "Rich documentation"
+
+#~ msgid "敬请期待。。。"
+#~ msgstr "Coming Soon..."
+
+#~ msgid "/static/home/banner_maixcam.jpg"
+#~ msgstr "/static/home/banner_maixcam_en.jpg"
+
+#~ msgid "/maixcam"
+#~ msgstr "/en/maixcam"
+
+#~ msgid "/maixpy"
+#~ msgstr "/en/maixpy"
+
+#~ msgid "https://item.taobao.com/item.htm?id=784724795837"
+#~ msgstr "https://www.aliexpress.com/store/911876460"
+
+#~ msgid "/static/home/LicheeRV-Nano.jpg"
+#~ msgstr "/static/home/LicheeRV-nano_en.jpg"
+
+#~ msgid "/static/home/LonganPi3H.jpg"
+#~ msgstr "/static/home/maixiii_axpi_en.jpg"
+
+#~ msgid "/static/home/console-4A.jpg"
+#~ msgstr "/static/home/maixiii_axpi_en.jpg"
+
+#~ msgid "产品动态"
+#~ msgstr "Product News"
+
+#~ msgid "Maix AI 视觉"
+#~ msgstr "Maix AI Vision"
+
+#~ msgid "MaixSense 传感器"
+#~ msgstr "MaixSense Sensor"
+
+#~ msgid "其它"
+#~ msgstr "Others"
+
+#~ msgid "Tang FPGA 系列"
+#~ msgstr "Tang FPGA Series"
+
+#~ msgid "Tang 系列板卡参数对比"
+#~ msgstr "Tang Series Product Comparison"
+
+#~ msgid "芯片"
+#~ msgstr "Chip"
+
+#~ msgid "查找表(LUT)"
+#~ msgstr "LUT4"
+
+#~ msgid "寄存器(FF)"
+#~ msgstr "FF"
+
+#~ msgid "板载_fpga"
+#~ msgstr "Onboard"
+
+#~ msgid "内含"
+#~ msgstr "Inchip"
+
+#~ msgid "内嵌处理器"
+#~ msgstr "CPU"
+
+#~ msgid "其他特点"
+#~ msgstr "Ohter Features"
+
+#~ msgid "内含 6.6G Transceivers"
+#~ msgstr "Inchip 6.6G Transceivers"
+
+#~ msgid "支持 PCIe 2.0 通信"
+#~ msgstr "Support PCIe 2.0 Interface"
+
+#~ msgid "支持 USB3 数据传输"
+#~ msgstr "Support USB3 SS Transmission"
+
+#~ msgid "内含 12.5G Transceivers"
+#~ msgstr "Inchip 12.5G Transceivers"
+
+#~ msgid "支持 PCIe 3.0 通信"
+#~ msgstr "Support PCIe 3.0 Interface"
+
+#~ msgid "支持 SFP+ 数据传输"
+#~ msgstr "Support SFP+ (10G) Transmission"
+
+#~ msgid "内含 2.5G MIPI C/DPHY RX/TX"
+#~ msgstr "2.5G MIPI C/DPHY RX/TX inside"
+
+#~ msgid "内含 2.5G MIPI DPHY RX/TX"
+#~ msgstr "2.5G MIPI DPHY RX/TX inside"
+
+#~ msgid "支持 PMOD, 64MByte SDRAM模块"
+#~ msgstr "Support PMOD,64MByte SDRAM Module"
+
+#~ msgid "支持 USB手柄"
+#~ msgstr "Support USB Joystick"
+
+#~ msgid "丰富外设，HDMI/以太网/USB"
+#~ msgstr "Rich peripherals, HDMI/Ethernet/USB"
+
+#~ msgid "M.2 外形兼容"
+#~ msgstr "M.2 Golden Fingers compatible"
+
+#~ msgid "for RetroGame ~"
 #~ msgstr ""
 
+#~ msgid "for RISCV softcore"
+#~ msgstr ""
+
+#~ msgid "GOAI~"
+#~ msgstr ""
+
+#~ msgid "小体积的大容量 FPGA 开发板"
+#~ msgstr "Campact High-capacity FPGA Board"
+
+#~ msgid "/hardware/zh/tang/tang-mega-138k/mega-138k.html"
+#~ msgstr "/hardware/en/tang/tang-mega-138k/mega-138k.html"
+
+#~ msgid "可以高速通信的大容量 FPGA 开发板"
+#~ msgstr "High Speed Interface FPGA Board"
+
+#~ msgid "自由拓展的 FPGA 开发板"
+#~ msgstr "Free Expansion FPGA board"
+
+#~ msgid "自带多种外设接口的 FPGA 开发板"
+#~ msgstr "Mutiple Interfaces FPGA Board"
+
+#~ msgid "适用于模拟复古游戏机的 FPGA 开发板"
+#~ msgstr "Retro Games Friendly FPGA Board"
+
+#~ msgid "适合 RiscV 软核验证的 FPGA 开发板"
+#~ msgstr "RiscV Softcore FPGA Board"
+
+#~ msgid "芯片内部含有 MCU 的 FPGA 开发板"
+#~ msgstr "Hardcore Inside FPGA Board"
+
+#~ msgid "开发中，敬请期待。。。"
+#~ msgstr "Coming soon..."
+
+#~ msgid "/hardware/zh/tang/tang-mega-138k/mega-138k-pro.html"
+#~ msgstr "/hardware/en/tang/tang-mega-138k/mega-138k-pro.html"
+

layout/locales/messages.pot

@@ -0,0 +1,547 @@
+#: home.html:3
+msgid "翻译内容"
+msgstr ""
+
+#: home.html:93
+msgid "/static/home/banner_maixcam.jpg"
+msgstr ""
+
+#: home.html:96 home.html:113 home.html:126 home.html:139 home.html:152
+#: home.html:165 home.html:178 home.html:191 licheepi.html:217
+#: licheepi.html:238 licheepi.html:254 licheepi.html:275 licheepi.html:291
+#: licheepi.html:307 maix.html:163 maix.html:180 maix.html:197 maix.html:237
+#: maix.html:254 maix.html:275 maix.html:292 maixsense.html:40
+#: maixsense.html:56 others.html:38 tang.html:167 tang.html:183 tang.html:199
+#: tang.html:215 tang.html:231 tang.html:247 tang.html:263 tang.html:279
+#: tang.html:295
+msgid "文档"
+msgstr ""
+
+#: home.html:97
+msgid "/maixcam"
+msgstr ""
+
+#: home.html:101
+msgid "/maixpy"
+msgstr ""
+
+#: home.html:104 home.html:117 home.html:130 home.html:143 home.html:156
+#: home.html:169 home.html:182 home.html:195 licheepi.html:221
+#: licheepi.html:242 licheepi.html:258 licheepi.html:279 licheepi.html:295
+#: licheepi.html:311 maix.html:167 maix.html:241 maix.html:262 maix.html:279
+#: maix.html:296 maixsense.html:44 maixsense.html:60 others.html:42
+#: tang.html:171 tang.html:187 tang.html:203 tang.html:219 tang.html:235
+#: tang.html:251 tang.html:267 tang.html:283 tang.html:299
+msgid "购买"
+msgstr ""
+
+#: home.html:105
+msgid "https://item.taobao.com/item.htm?id=784724795837"
+msgstr ""
+
+#: home.html:110
+msgid "/static/home/LicheeRV-Nano.jpg"
+msgstr ""
+
+#: home.html:118 licheepi.html:243
+msgid "https://item.taobao.com/item.htm?id=764939520376"
+msgstr ""
+
+#: home.html:123
+msgid "/static/home/LonganPi3H.jpg"
+msgstr ""
+
+#: home.html:131 licheepi.html:280
+msgid "https://item.taobao.com/item.htm?ft=t&id=758221950525"
+msgstr ""
+
+#: home.html:136
+msgid "/static/home/console-4A.jpg"
+msgstr ""
+
+#: home.html:183 home.html:196 others.html:43
+msgid "https://item.taobao.com/item.htm?id=737788586308"
+msgstr ""
+
+#: home.html:205
+msgid "产品动态"
+msgstr ""
+
+#: home.html:209
+msgid "Maix AI 视觉"
+msgstr ""
+
+#: home.html:221
+msgid "MaixSense 传感器"
+msgstr ""
+
+#: home.html:225
+msgid "其它"
+msgstr ""
+
+#: licheepi.html:4
+msgid "Linux RISC-V SBC 系列"
+msgstr ""
+
+#: licheepi.html:23
+msgid "Linux ARM SBC 系列"
+msgstr ""
+
+#: licheepi.html:41
+msgid "RISC-V SBC 系列产品参数对比"
+msgstr ""
+
+#: licheepi.html:49 licheepi.html:132 maix.html:53 tang.html:31
+msgid "参数"
+msgstr ""
+
+#: licheepi.html:57 licheepi.html:140 maix.html:63
+msgid "处理器"
+msgstr ""
+
+#: licheepi.html:63 licheepi.html:146 maix.html:71
+msgid "内存"
+msgstr ""
+
+#: licheepi.html:69 licheepi.html:152 maix.html:90 tang.html:129
+msgid "储存"
+msgstr ""
+
+#: licheepi.html:70 licheepi.html:71 licheepi.html:72 licheepi.html:153
+#: licheepi.html:154
+msgid "预留"
+msgstr ""
+
+#: licheepi.html:70 licheepi.html:71 licheepi.html:72 licheepi.html:153
+#: licheepi.html:154 licheepi.html:155 maix.html:91 maix.html:92 maix.html:93
+#: maix.html:94 maix.html:95
+msgid "卡"
+msgstr ""
+
+#: licheepi.html:75 licheepi.html:158
+msgid "GPU和显示"
+msgstr ""
+
+#: licheepi.html:81 licheepi.html:82 licheepi.html:108 licheepi.html:160
+#: licheepi.html:161 licheepi.html:185 licheepi.html:186 licheepi.html:187
+#: maix.html:129 maix.html:136 maix.html:137
+msgid "无"
+msgstr ""
+
+#: licheepi.html:85 licheepi.html:164
+msgid "编解码器"
+msgstr ""
+
+#: licheepi.html:88 licheepi.html:91 licheepi.html:94 licheepi.html:166
+#: licheepi.html:169 licheepi.html:173 licheepi.html:174
+msgid "解码"
+msgstr ""
+
+#: licheepi.html:88 licheepi.html:91 licheepi.html:95 licheepi.html:166
+#: licheepi.html:170 licheepi.html:174
+msgid "编码"
+msgstr ""
+
+#: licheepi.html:99 licheepi.html:178 maix.html:106
+msgid "操作系统"
+msgstr ""
+
+#: licheepi.html:100 licheepi.html:101 licheepi.html:179 licheepi.html:181
+msgid "主线"
+msgstr ""
+
+#: licheepi.html:111 licheepi.html:190 maix.html:114
+msgid "典型外设"
+msgstr ""
+
+#: licheepi.html:126
+msgid "ARM SBC 系列产品参数对比"
+msgstr ""
+
+#: licheepi.html:155 maix.html:92 maix.html:93
+msgid "板载"
+msgstr ""
+
+#: licheepi.html:214
+msgid "高性能 RISC-V@1.85GHz x4 开发板/平板/笔记本电脑"
+msgstr ""
+
+#: licheepi.html:222
+msgid "https://item.taobao.com/item.htm?id=715508771884"
+msgstr ""
+
+#: licheepi.html:226
+msgid "更多"
+msgstr ""
+
+#: licheepi.html:235
+msgid "高性价比迷你 RISC-V IPC/屏显开发板"
+msgstr ""
+
+#: licheepi.html:251
+msgid "高集成度入门级 RISC-V Linux 开发板"
+msgstr ""
+
+#: licheepi.html:272
+msgid "H618 4核A53@1.5GHz 小电脑"
+msgstr ""
+
+#: licheepi.html:276
+msgid "/lpi3h.html"
+msgstr ""
+
+#: licheepi.html:288 licheepi.html:304
+msgid "迷你"
+msgstr ""
+
+#: licheepi.html:288 licheepi.html:304
+msgid "开发板"
+msgstr ""
+
+#: maix.html:5
+msgid "全新 Maix 生态"
+msgstr ""
+
+#: maix.html:27
+msgid "经典 Maix 视觉系列"
+msgstr ""
+
+#: maix.html:46
+msgid "Maix 系列产品参数对比"
+msgstr ""
+
+#: maix.html:65
+msgid "双核"
+msgstr ""
+
+#: maix.html:65
+msgid "位"
+msgstr ""
+
+#: maix.html:80 maix.html:83 maix.html:85
+msgid "支持常用"
+msgstr ""
+
+#: maix.html:80 maix.html:83 maix.html:86
+msgid "模型"
+msgstr ""
+
+#: maix.html:80 maix.html:92
+msgid "支持"
+msgstr ""
+
+#: maix.html:81 maix.html:82
+msgid "支持有限"
+msgstr ""
+
+#: maix.html:81 maix.html:82
+msgid "算子"
+msgstr ""
+
+#: maix.html:85
+msgid "和"
+msgstr ""
+
+#: maix.html:91 maix.html:93 maix.html:94 maix.html:95
+msgid "或者"
+msgstr ""
+
+#: maix.html:98
+msgid "软件支持"
+msgstr ""
+
+#: maix.html:125 maix.html:126 maix.html:127 maix.html:128 maix.html:129
+msgid "支持度"
+msgstr ""
+
+#: maix.html:125
+msgid "优"
+msgstr ""
+
+#: maix.html:126 maix.html:128
+msgid "中"
+msgstr ""
+
+#: maix.html:127
+msgid "良"
+msgstr ""
+
+#: maix.html:140
+msgid "文档和易用性"
+msgstr ""
+
+#: maix.html:160
+msgid "RISC-V 1GHz + 1Tops NPU, 4M高清摄像头，2.3寸552x368高清电容触摸屏，完美支持全新 Maix 生态所有软件"
+msgstr ""
+
+#: maix.html:168 tang.html:284 tang.html:300
+msgid "https://sipeed.taobao.com"
+msgstr ""
+
+#: maix.html:177
+msgid "Python 语法，简易 API，快速落地 AI 视觉、听觉应用"
+msgstr ""
+
+#: maix.html:184 maix.html:202
+msgid "源码"
+msgstr ""
+
+#: maix.html:194
+msgid "C++ SDK, MaixPy 同款 API，稳定高效易上手"
+msgstr ""
+
+#: maix.html:210
+msgid "IDE 和云平台"
+msgstr ""
+
+#: maix.html:212
+msgid "代码编辑运行、图像实时预览，在线一键 AI 模型训练"
+msgstr ""
+
+#: maix.html:234
+msgid "带硬件 AI 加速的 MCU，配合易用的软件快速落地低成本 AI 应用"
+msgstr ""
+
+#: maix.html:251
+msgid "硬件 AI 加速 + Linux + 易用的软件，教育、工业视觉、智能家居场景绝配"
+msgstr ""
+
+#: maix.html:258
+msgid "MaixPy3"
+msgstr ""
+
+#: maix.html:272
+msgid "3.6Tops AI ISP，微光夜视，大量常见 AI 模型支持，安防智能 IPC"
+msgstr ""
+
+#: maix.html:289
+msgid "10Tops AI 算力，32 路 1080p 高清 AI 视频监控，AI 大模型支持"
+msgstr ""
+
+#: maix.html:297
+msgid "https://item.taobao.com/item.htm?id=744014549573"
+msgstr ""
+
+#: maixsense.html:4
+msgid "MaixSense 传感器模组系列"
+msgstr ""
+
+#: maixsense.html:37
+msgid "深度传感器模组"
+msgstr ""
+
+#: maixsense.html:53
+msgid "深度摄像头模组"
+msgstr ""
+
+#: others.html:24
+msgid "其它未列出的产品请进入"
+msgstr ""
+
+#: others.html:24
+msgid "产品文档"
+msgstr ""
+
+#: others.html:24
+msgid "在左侧目录查找"
+msgstr ""
+
+#: others.html:35
+msgid "逻辑分析仪+CKLink+DAPLink+USB转串口 多合一指尖工具"
+msgstr ""
+
+#: tang.html:4
+msgid "Tang FPGA 系列"
+msgstr ""
+
+#: tang.html:24
+msgid "Tang 系列板卡参数对比"
+msgstr ""
+
+#: tang.html:45
+msgid "芯片"
+msgstr ""
+
+#: tang.html:57
+msgid "查找表(LUT)"
+msgstr ""
+
+#: tang.html:69
+msgid "寄存器(FF)"
+msgstr ""
+
+#: tang.html:106 tang.html:107 tang.html:108 tang.html:110 tang.html:130
+#: tang.html:131 tang.html:132 tang.html:133 tang.html:134 tang.html:135
+#: tang.html:136 tang.html:137 tang.html:138
+msgid "板载_fpga"
+msgstr ""
+
+#: tang.html:111 tang.html:112 tang.html:113 tang.html:114 tang.html:137
+#: tang.html:138
+msgid "内含"
+msgstr ""
+
+#: tang.html:117
+msgid "内嵌处理器"
+msgstr ""
+
+#: tang.html:141
+msgid "其他特点"
+msgstr ""
+
+#: tang.html:142 tang.html:144 tang.html:147
+msgid "内含 6.6G Transceivers"
+msgstr ""
+
+#: tang.html:142 tang.html:144 tang.html:147
+msgid "支持 PCIe 2.0 通信"
+msgstr ""
+
+#: tang.html:142 tang.html:144
+msgid "支持 USB3 数据传输"
+msgstr ""
+
+#: tang.html:143
+msgid "内含 12.5G Transceivers"
+msgstr ""
+
+#: tang.html:143
+msgid "支持 PCIe 3.0 通信"
+msgstr ""
+
+#: tang.html:143
+msgid "支持 SFP+ 数据传输"
+msgstr ""
+
+#: tang.html:144 tang.html:147
+msgid "内含 2.5G MIPI C/DPHY RX/TX"
+msgstr ""
+
+#: tang.html:145
+msgid "内含 2.5G MIPI DPHY RX/TX"
+msgstr ""
+
+#: tang.html:145
+msgid "支持 PMOD, 64MByte SDRAM模块"
+msgstr ""
+
+#: tang.html:145
+msgid "支持 USB手柄"
+msgstr ""
+
+#: tang.html:146
+msgid "丰富外设，HDMI/以太网/USB"
+msgstr ""
+
+#: tang.html:147
+msgid "M.2 外形兼容"
+msgstr ""
+
+#: tang.html:148
+msgid "for RetroGame ~"
+msgstr ""
+
+#: tang.html:149
+msgid "for RISCV softcore"
+msgstr ""
+
+#: tang.html:150
+msgid "GOAI~"
+msgstr ""
+
+#: tang.html:164
+msgid "小体积的大容量 FPGA 开发板"
+msgstr ""
+
+#: tang.html:168
+msgid "/hardware/zh/tang/tang-mega-138k/mega-138k.html"
+msgstr ""
+
+#: tang.html:172
+msgid "https://item.taobao.com/item.htm?id=808924746746"
+msgstr ""
+
+#: tang.html:180
+msgid "可以高速通信的大容量 FPGA 开发板"
+msgstr ""
+
+#: tang.html:184
+msgid "/hardware/zh/tang/tang-mega-138k/mega-138k-pro.html"
+msgstr ""
+
+#: tang.html:188
+msgid "https://item.taobao.com/item.htm?id=740536508140"
+msgstr ""
+
+#: tang.html:196
+msgid "自由拓展的 FPGA 开发板"
+msgstr ""
+
+#: tang.html:200
+msgid "/hardware/zh/tang/tang-primer-25k/primer-25k.html"
+msgstr ""
+
+#: tang.html:204
+msgid "https://item.taobao.com/item.htm?id=746293292946"
+msgstr ""
+
+#: tang.html:212
+msgid "自带多种外设接口的 FPGA 开发板"
+msgstr ""
+
+#: tang.html:216
+msgid "/hardware/zh/tang/tang-primer-20k/primer-20k.html"
+msgstr ""
+
+#: tang.html:220
+msgid "https://item.taobao.com/item.htm?id=680099020807"
+msgstr ""
+
+#: tang.html:228
+msgid "适用于模拟复古游戏机的 FPGA 开发板"
+msgstr ""
+
+#: tang.html:232
+msgid "/hardware/zh/tang/tang-nano-20k/nano-20k.html"
+msgstr ""
+
+#: tang.html:236
+msgid "https://item.taobao.com/item.htm?id=717932028073"
+msgstr ""
+
+#: tang.html:244
+msgid "适合 RiscV 软核验证的 FPGA 开发板"
+msgstr ""
+
+#: tang.html:248
+msgid "/hardware/zh/tang/Tang-Nano-9K/Nano-9K.html"
+msgstr ""
+
+#: tang.html:252
+msgid "https://item.taobao.com/item.htm?id=666055424174"
+msgstr ""
+
+#: tang.html:260
+msgid "芯片内部含有 MCU 的 FPGA 开发板"
+msgstr ""
+
+#: tang.html:264
+msgid "/hardware/zh/tang/Tang-Nano-4K/Nano-4K.html"
+msgstr ""
+
+#: tang.html:268
+msgid "https://item.taobao.com/item.htm?id=661994055100"
+msgstr ""
+
+#: tang.html:276 tang.html:292
+msgid "开发中，敬请期待。。。"
+msgstr ""
+
+#: tang.html:280
+msgid "/hardware/zh/tang/tang-mega-60k/mega-60k.html"
+msgstr ""
+
+#: tang.html:296
+msgid "/hardware/zh/tang/tang-primer-15k/primer-15k.html"
+msgstr ""
+

layout/locales/zh/LC_MESSAGES/messages.po

@@ -11,8 +11,9 @@ msgstr ""
 #: licheepi.html:238 licheepi.html:254 licheepi.html:275 licheepi.html:291
 #: licheepi.html:307 maix.html:163 maix.html:180 maix.html:197 maix.html:237
 #: maix.html:254 maix.html:275 maix.html:292 maixsense.html:40
-#: maixsense.html:56 others.html:38 tang.html:137 tang.html:153 tang.html:169
-#: tang.html:185 tang.html:201 tang.html:217
+#: maixsense.html:56 others.html:38 tang.html:167 tang.html:183 tang.html:199
+#: tang.html:215 tang.html:231 tang.html:247 tang.html:263 tang.html:279
+#: tang.html:295
 msgid "文档"
 msgstr ""
 
@@ -29,8 +30,8 @@ msgstr ""
 #: licheepi.html:242 licheepi.html:258 licheepi.html:279 licheepi.html:295
 #: licheepi.html:311 maix.html:167 maix.html:241 maix.html:262 maix.html:279
 #: maix.html:296 maixsense.html:44 maixsense.html:60 others.html:42
-#: tang.html:141 tang.html:157 tang.html:173 tang.html:189 tang.html:205
-#: tang.html:221
+#: tang.html:171 tang.html:187 tang.html:203 tang.html:219 tang.html:235
+#: tang.html:251 tang.html:267 tang.html:283 tang.html:299
 msgid "购买"
 msgstr ""
 
@@ -102,7 +103,7 @@ msgstr ""
 msgid "内存"
 msgstr ""
 
-#: licheepi.html:69 licheepi.html:152 maix.html:90 tang.html:105
+#: licheepi.html:69 licheepi.html:152 maix.html:90 tang.html:129
 msgid "储存"
 msgstr ""
 
@@ -273,7 +274,7 @@ msgstr ""
 msgid "RISC-V 1GHz + 1Tops NPU, 4M高清摄像头，2.3寸552x368高清电容触摸屏，完美支持全新 Maix 生态所有软件"
 msgstr ""
 
-#: maix.html:168
+#: maix.html:168 tang.html:284 tang.html:300
 msgid "https://sipeed.taobao.com"
 msgstr ""
 
@@ -357,99 +358,193 @@ msgstr ""
 msgid "Tang 系列板卡参数对比"
 msgstr ""
 
-#: tang.html:42
+#: tang.html:45
 msgid "芯片"
 msgstr ""
 
-#: tang.html:51
+#: tang.html:57
 msgid "查找表(LUT)"
 msgstr ""
 
-#: tang.html:60
+#: tang.html:69
 msgid "寄存器(FF)"
 msgstr ""
 
-#: tang.html:88 tang.html:90 tang.html:106 tang.html:107 tang.html:108
-#: tang.html:109 tang.html:110 tang.html:111
+#: tang.html:106 tang.html:107 tang.html:108 tang.html:110 tang.html:130
+#: tang.html:131 tang.html:132 tang.html:133 tang.html:134 tang.html:135
+#: tang.html:136 tang.html:137 tang.html:138
 msgid "板载_fpga"
-msgstr "板载"
+msgstr ""
 
-#: tang.html:91 tang.html:92 tang.html:93 tang.html:110 tang.html:111
+#: tang.html:111 tang.html:112 tang.html:113 tang.html:114 tang.html:137
+#: tang.html:138
 msgid "内含"
 msgstr ""
 
-#: tang.html:96
+#: tang.html:117
 msgid "内嵌处理器"
 msgstr ""
 
-#: tang.html:114
+#: tang.html:141
 msgid "其他特点"
 msgstr ""
 
-#: tang.html:115
+#: tang.html:142 tang.html:144 tang.html:147
+msgid "内含 6.6G Transceivers"
+msgstr ""
+
+#: tang.html:142 tang.html:144 tang.html:147
+msgid "支持 PCIe 2.0 通信"
+msgstr ""
+
+#: tang.html:142 tang.html:144
+msgid "支持 USB3 数据传输"
+msgstr ""
+
+#: tang.html:143
 msgid "内含 12.5G Transceivers"
 msgstr ""
 
-#: tang.html:115
-msgid "支持 PCIE 通信"
+#: tang.html:143
+msgid "支持 PCIe 3.0 通信"
 msgstr ""
 
-#: tang.html:115
+#: tang.html:143
 msgid "支持 SFP+ 数据传输"
 msgstr ""
 
-#: tang.html:116
+#: tang.html:144 tang.html:147
+msgid "内含 2.5G MIPI C/DPHY RX/TX"
+msgstr ""
+
+#: tang.html:145
 msgid "内含 2.5G MIPI DPHY RX/TX"
 msgstr ""
 
-#: tang.html:116
+#: tang.html:145
 msgid "支持 PMOD, 64MByte SDRAM模块"
 msgstr ""
 
-#: tang.html:116
+#: tang.html:145
 msgid "支持 USB手柄"
 msgstr ""
 
-#: tang.html:117
+#: tang.html:146
 msgid "丰富外设，HDMI/以太网/USB"
 msgstr ""
 
-#: tang.html:118
+#: tang.html:147
+msgid "M.2 外形兼容"
+msgstr ""
+
+#: tang.html:148
 msgid "for RetroGame ~"
 msgstr ""
 
-#: tang.html:119
+#: tang.html:149
 msgid "for RISCV softcore"
 msgstr ""
 
-#: tang.html:120
+#: tang.html:150
 msgid "GOAI~"
 msgstr ""
 
-#: tang.html:134
+#: tang.html:164
+msgid "小体积的大容量 FPGA 开发板"
+msgstr ""
+
+#: tang.html:168
+msgid "/hardware/zh/tang/tang-mega-138k/mega-138k.html"
+msgstr ""
+
+#: tang.html:172
+msgid "https://item.taobao.com/item.htm?id=808924746746"
+msgstr ""
+
+#: tang.html:180
 msgid "可以高速通信的大容量 FPGA 开发板"
 msgstr ""
 
-#: tang.html:150
+#: tang.html:184
+msgid "/hardware/zh/tang/tang-mega-138k/mega-138k-pro.html"
+msgstr ""
+
+#: tang.html:188
+msgid "https://item.taobao.com/item.htm?id=740536508140"
+msgstr ""
+
+#: tang.html:196
 msgid "自由拓展的 FPGA 开发板"
 msgstr ""
 
-#: tang.html:166
+#: tang.html:200
+msgid "/hardware/zh/tang/tang-primer-25k/primer-25k.html"
+msgstr ""
+
+#: tang.html:204
+msgid "https://item.taobao.com/item.htm?id=746293292946"
+msgstr ""
+
+#: tang.html:212
 msgid "自带多种外设接口的 FPGA 开发板"
 msgstr ""
 
-#: tang.html:182
+#: tang.html:216
+msgid "/hardware/zh/tang/tang-primer-20k/primer-20k.html"
+msgstr ""
+
+#: tang.html:220
+msgid "https://item.taobao.com/item.htm?id=680099020807"
+msgstr ""
+
+#: tang.html:228
 msgid "适用于模拟复古游戏机的 FPGA 开发板"
 msgstr ""
 
-#: tang.html:198
+#: tang.html:232
+msgid "/hardware/zh/tang/tang-nano-20k/nano-20k.html"
+msgstr ""
+
+#: tang.html:236
+msgid "https://item.taobao.com/item.htm?id=717932028073"
+msgstr ""
+
+#: tang.html:244
 msgid "适合 RiscV 软核验证的 FPGA 开发板"
 msgstr ""
 
-#: tang.html:214
+#: tang.html:248
+msgid "/hardware/zh/tang/Tang-Nano-9K/Nano-9K.html"
+msgstr ""
+
+#: tang.html:252
+msgid "https://item.taobao.com/item.htm?id=666055424174"
+msgstr ""
+
+#: tang.html:260
 msgid "芯片内部含有 MCU 的 FPGA 开发板"
 msgstr ""
 
+#: tang.html:264
+msgid "/hardware/zh/tang/Tang-Nano-4K/Nano-4K.html"
+msgstr ""
+
+#: tang.html:268
+msgid "https://item.taobao.com/item.htm?id=661994055100"
+msgstr ""
+
+#: tang.html:276 tang.html:292
+msgid "开发中，敬请期待。。。"
+msgstr ""
+
+#: tang.html:280
+msgid "/hardware/zh/tang/tang-mega-60k/mega-60k.html"
+msgstr ""
+
+#: tang.html:296
+msgid "/hardware/zh/tang/tang-primer-15k/primer-15k.html"
+msgstr ""
+
 #~ msgid "/static/home/licheepi4a_post.jpg"
 #~ msgstr ""
 
@@ -564,3 +659,135 @@ msgstr ""
 #~ msgid "RISC-V 1GHz + 1Tops NPU, 4M高清摄像头，2.3寸553x368高清电容触摸屏，玩美支持全新 Maix 生态所有软件"
 #~ msgstr ""
 
+#~ msgid "敬请期待。。。"
+#~ msgstr ""
+
+#~ msgid "/static/home/banner_maixcam.jpg"
+#~ msgstr ""
+
+#~ msgid "/maixcam"
+#~ msgstr ""
+
+#~ msgid "/maixpy"
+#~ msgstr ""
+
+#~ msgid "https://item.taobao.com/item.htm?id=784724795837"
+#~ msgstr ""
+
+#~ msgid "/static/home/LicheeRV-Nano.jpg"
+#~ msgstr ""
+
+#~ msgid "/static/home/LonganPi3H.jpg"
+#~ msgstr ""
+
+#~ msgid "/static/home/console-4A.jpg"
+#~ msgstr ""
+
+#~ msgid "支持 PCIE 通信"
+#~ msgstr ""
+
+#~ msgid "Tang FPGA 系列"
+#~ msgstr ""
+
+#~ msgid "Tang 系列板卡参数对比"
+#~ msgstr ""
+
+#~ msgid "芯片"
+#~ msgstr ""
+
+#~ msgid "查找表(LUT)"
+#~ msgstr ""
+
+#~ msgid "寄存器(FF)"
+#~ msgstr ""
+
+#~ msgid "板载_fpga"
+#~ msgstr ""
+
+#~ msgid "内含"
+#~ msgstr ""
+
+#~ msgid "内嵌处理器"
+#~ msgstr ""
+
+#~ msgid "其他特点"
+#~ msgstr ""
+
+#~ msgid "内含 6.6G Transceivers"
+#~ msgstr ""
+
+#~ msgid "支持 PCIe 2.0 通信"
+#~ msgstr ""
+
+#~ msgid "支持 USB3 数据传输"
+#~ msgstr ""
+
+#~ msgid "内含 12.5G Transceivers"
+#~ msgstr ""
+
+#~ msgid "支持 PCIe 3.0 通信"
+#~ msgstr ""
+
+#~ msgid "支持 SFP+ 数据传输"
+#~ msgstr ""
+
+#~ msgid "内含 2.5G MIPI C/DPHY RX/TX"
+#~ msgstr ""
+
+#~ msgid "内含 2.5G MIPI DPHY RX/TX"
+#~ msgstr ""
+
+#~ msgid "支持 PMOD, 64MByte SDRAM模块"
+#~ msgstr ""
+
+#~ msgid "支持 USB手柄"
+#~ msgstr ""
+
+#~ msgid "丰富外设，HDMI/以太网/USB"
+#~ msgstr ""
+
+#~ msgid "M.2 外形兼容"
+#~ msgstr ""
+
+#~ msgid "for RetroGame ~"
+#~ msgstr ""
+
+#~ msgid "for RISCV softcore"
+#~ msgstr ""
+
+#~ msgid "GOAI~"
+#~ msgstr ""
+
+#~ msgid "小体积的大容量 FPGA 开发板"
+#~ msgstr ""
+
+#~ msgid "/hardware/zh/tang/tang-mega-138k/mega-138k.html"
+#~ msgstr ""
+
+#~ msgid "可以高速通信的大容量 FPGA 开发板"
+#~ msgstr ""
+
+#~ msgid "自由拓展的 FPGA 开发板"
+#~ msgstr ""
+
+#~ msgid "自带多种外设接口的 FPGA 开发板"
+#~ msgstr ""
+
+#~ msgid "适用于模拟复古游戏机的 FPGA 开发板"
+#~ msgstr ""
+
+#~ msgid "适合 RiscV 软核验证的 FPGA 开发板"
+#~ msgstr ""
+
+#~ msgid "芯片内部含有 MCU 的 FPGA 开发板"
+#~ msgstr ""
+
+#~ msgid "开发中，敬请期待。。。"
+#~ msgstr ""
+
+#~ msgid "/hardware/zh/tang/tang-mega-138k/mega-138k-pro.html"
+#~ msgstr ""
+
+#~ msgid "https://item.taobao.com/item.htm?id=74053650814"
+#~ msgstr ""
+

layout/tang.html

@@ -30,8 +30,11 @@
         <tr>
           <th>{{_('参数')}}</th>
           <th>Mega 138K</th>
+          <th>Mega 138K Pro</th>
+          <th>Mega 60K</th>
           <th>Primer 25K</th>
           <th>Primer 20K</th>
+          <th>Primer 15K</th>
           <th>Nano 20K</th>
           <th>Nano 9K</th>
           <th>Nano 4K</th>
@@ -41,8 +44,11 @@
         <tr>
           <td>{{_('芯片')}}</td>
           <td>GW5AST-138</td>
+          <td>GW5AST-138</td>
+          <td>GW5AT-60</td>
           <td>GW5A-25</td>
           <td>GW2A-18</td>
+          <td>GW5ART-15</td>
           <td>GW2AR-18</td>
           <td>GW1NR-9</td>
           <td>GW1NSR-4C</td>
@@ -50,8 +56,11 @@
         <tr>
           <td>{{_('查找表(LUT)')}}</td>
           <td>138240</td>
+          <td>138240</td>
+          <td>59904</td>
           <td>23040</td>
           <td>20736</td>
+          <td>15120</td>
           <td>20736</td>
           <td>8640</td>
           <td>4608</td>
@@ -59,8 +68,11 @@
         <tr>
           <td>{{_('寄存器(FF)')}}</td>
           <td>138240</td>
+          <td>138240</td>
+          <td>59904</td>
           <td>23040</td>
           <td>15552</td>
+          <td>15120</td>
           <td>15552</td>
           <td>6480</td>
           <td>4608</td>
@@ -68,8 +80,11 @@
         <tr>
           <td>SSRAM(Kbits)</td>
           <td>1080</td>
+          <td>1080</td>
+          <td>468</td>
           <td>180</td>
           <td>41</td>
+          <td>118</td>
           <td>41</td>
           <td>17</td>
           <td></td>
@@ -77,8 +92,11 @@
         <tr>
           <td>BSRAM(Kbits)</td>
           <td>6120</td>
+          <td>6120</td>
+          <td>2124</td>
           <td>1008</td>
           <td>828</td>
+          <td>630</td>
           <td>828</td>
           <td>468</td>
           <td>180</td>
@@ -86,8 +104,11 @@
         <tr>
           <td nowrap="nowrap"> RAM </td>
           <td nowrap="nowrap">{{_('板载_fpga')}} 4Gb DDR3 SDRAM * 2</td>
-          <td nowrap="nowrap"></td>
+          <td nowrap="nowrap">{{_('板载_fpga')}} 4Gb DDR3 SDRAM * 2</td>
+          <td nowrap="nowrap">{{_('板载_fpga')}} 4Gb DDR3 SDRAM * 1</td>
+          <td nowrap="nowrap">-</td>
           <td nowrap="nowrap">{{_('板载_fpga')}} 1Gb DDR3 SDRAM</td>
+          <td nowrap="nowrap">{{_('内含')}} 64Mb PSRAM</td>
           <td nowrap="nowrap">{{_('内含')}} 64Mb SDR SDRAM</td>
           <td nowrap="nowrap">{{_('内含')}} 64Mb PSRAM</td>
           <td nowrap="nowrap">{{_('内含')}} 64Mb HyperRAM</td>
@@ -95,26 +116,35 @@
         <tr>
           <td nowrap="nowrap">{{_('内嵌处理器')}}</td>
           <td nowrap="nowrap">RiscV AE350_SOC</td>
-          <td></td>
-          <td></td>
-          <td></td>
-          <td></td>
+          <td nowrap="nowrap">RiscV AE350_SOC</td>
+          <td>-</td>
+          <td>-</td>
+          <td>-</td>
+          <td>-</td>
+          <td>-</td>
+          <td>-</td>
           <td>Cortex-M3</td>
         </tr>
         <tr>
           <td nowrap="nowrap">{{_('储存')}}</td>
-          <td nowrap="nowrap">{{_('板载_fpga')}} 32Mb Flash * 2</td>
-          <td nowrap="nowrap">{{_('板载_fpga')}} 32Mb Flash</td>
-          <td nowrap="nowrap">{{_('板载_fpga')}} 32Mb Flash</td>
-          <td nowrap="nowrap">{{_('板载_fpga')}} 32Mb Flash</td>
+          <td nowrap="nowrap">{{_('板载_fpga')}} 128Mb Flash</td>
+          <td nowrap="nowrap">{{_('板载_fpga')}} 128Mb Flash * 2</td>
+          <td nowrap="nowrap">{{_('板载_fpga')}} 128Mb Flash</td>
+          <td nowrap="nowrap">{{_('板载_fpga')}} 64Mb Flash</td>
+          <td nowrap="nowrap">{{_('板载_fpga')}} 64Mb Flash</td>
+          <td nowrap="nowrap">{{_('板载_fpga')}} 64Mb Flash</td>
+          <td nowrap="nowrap">{{_('板载_fpga')}} 64Mb Flash</td>
           <td nowrap="nowrap">{{_('内含')}} 608Kb Flash<br>{{_('板载_fpga')}} 32Mb Flash</td>
           <td nowrap="nowrap">{{_('内含')}} 256Kb Flash<br>{{_('板载_fpga')}} 32Mb Flash</td>
         </tr>
         <tr>
           <td>{{_('其他特点')}}</td>
-          <td nowrap="nowrap">{{_('内含 12.5G Transceivers')}}<br>{{_('支持 PCIE 通信')}}<br>{{_('支持 SFP+ 数据传输')}}</td>
+          <td nowrap="nowrap">{{_('内含 6.6G Transceivers')}}<br>{{_('支持 PCIe 2.0 通信')}}<br>{{_('支持 USB3 数据传输')}}</td>
+          <td nowrap="nowrap">{{_('内含 12.5G Transceivers')}}<br>{{_('支持 PCIe 3.0 通信')}}<br>{{_('支持 SFP+ 数据传输')}}</td>
+          <td nowrap="nowrap">{{_('内含 6.6G Transceivers')}}<br>{{_('内含 2.5G MIPI C/DPHY RX/TX')}}<br>{{_('支持 PCIe 2.0 通信')}}<br>{{_('支持 USB3 数据传输')}}</td>
           <td nowrap="nowrap">{{_('内含 2.5G MIPI DPHY RX/TX')}}<br>{{_('支持 PMOD, 64MByte SDRAM模块')}}<br>{{_('支持 USB手柄')}}</td>
           <td nowrap="nowrap">{{_('丰富外设，HDMI/以太网/USB')}}</td>
+          <td nowrap="nowrap">{{_('内含 6.6G Transceivers')}}<br>{{_('内含 2.5G MIPI C/DPHY RX/TX')}}<br>{{_('支持 PCIe 2.0 通信')}}<br>{{_('M.2 外形兼容')}}</td>
           <td nowrap="nowrap">{{_('for RetroGame ~')}}</td>
           <td nowrap="nowrap">{{_('for RISCV softcore')}}</td>
           <td nowrap="nowrap">{{_('GOAI~')}}</td>
@@ -128,6 +158,22 @@
 <script lang="ts">
   const data_tang = {
     cards: [
+      {
+        img: "/static/home/Tang_Mega_138K.png",
+        title: "Tang Mega 138K",
+        brief: "{{_('小体积的大容量 FPGA 开发板')}}",
+        btns: [
+          {
+            label: "{{_('文档')}}",
+            link: "{{_('/hardware/zh/tang/tang-mega-138k/mega-138k.html')}}",
+          },
+          {
+            label: "{{_('购买')}}",
+            link: "{{_('https://item.taobao.com/item.htm?id=808924746746')}}",
+            new_tab: true,
+          }
+        ],
+      },
       {
         img: "/static/home/Tang_Mega_138K_Pro.png",
         title: "Tang Mega 138K Pro",
@@ -135,11 +181,11 @@
         btns: [
           {
             label: "{{_('文档')}}",
-            link: "/hardware/zh/tang/tang-mega-138k/mega-138k.html",
+            link: "{{_('/hardware/zh/tang/tang-mega-138k/mega-138k-pro.html')}}",
           },
           {
             label: "{{_('购买')}}",
-            link: "https://item.taobao.com/item.htm?id=740536508140",
+            link: "{{_('https://item.taobao.com/item.htm?id=740536508140')}}",
             new_tab: true,
           }
         ],
@@ -151,11 +197,11 @@
         btns: [
           {
             label: "{{_('文档')}}",
-            link: "/hardware/zh/tang/tang-primer-25k/primer-25k.html",
+            link: "{{_('/hardware/zh/tang/tang-primer-25k/primer-25k.html')}}",
           },
           {
             label: "{{_('购买')}}",
-            link: "https://item.taobao.com/item.htm?id=746293292946",
+            link: "{{_('https://item.taobao.com/item.htm?id=746293292946')}}",
             new_tab: true,
           }
         ],
@@ -167,11 +213,11 @@
         btns: [
           {
             label: "{{_('文档')}}",
-            link: "/hardware/zh/tang/tang-primer-20k/primer-20k.html",
+            link: "{{_('/hardware/zh/tang/tang-primer-20k/primer-20k.html')}}",
           },
           {
             label: "{{_('购买')}}",
-            link: "https://item.taobao.com/item.htm?id=680099020807",
+            link: "{{_('https://item.taobao.com/item.htm?id=680099020807')}}",
             new_tab: true,
           },
         ],
@@ -183,11 +229,11 @@
         btns: [
           {
             label: "{{_('文档')}}",
-            link: "/nano20k",
+            link: "{{_('/hardware/zh/tang/tang-nano-20k/nano-20k.html')}}",
           },
           {
             label: "{{_('购买')}}",
-            link: "https://item.taobao.com/item.htm?id=717932028073",
+            link: "{{_('https://item.taobao.com/item.htm?id=717932028073')}}",
             new_tab: true,
           },
         ],
@@ -199,11 +245,11 @@
         btns: [
           {
             label: "{{_('文档')}}",
-            link: "/hardware/zh/tang/Tang-Nano-9K/Nano-9K.html",
+            link: "{{_('/hardware/zh/tang/Tang-Nano-9K/Nano-9K.html')}}",
           },
           {
             label: "{{_('购买')}}",
-            link: "https://item.taobao.com/item.htm?id=666055424174",
+            link: "{{_('https://item.taobao.com/item.htm?id=666055424174')}}",
             new_tab: true,
           },
         ],
@@ -215,15 +261,47 @@
         btns: [
           {
             label: "{{_('文档')}}",
-            link: "/hardware/zh/tang/Tang-Nano-4K/Nano-4K.html",
+            link: "{{_('/hardware/zh/tang/Tang-Nano-4K/Nano-4K.html')}}",
           },
           {
             label: "{{_('购买')}}",
-            link: "https://item.taobao.com/item.htm?id=661994055100",
+            link: "{{_('https://item.taobao.com/item.htm?id=661994055100')}}",
             new_tab: true,
           },
         ],
       },
+      {
+        img: "/static/home/Tang_Mega_60K.png",
+        title: "Tang Mega 60K",
+        brief: "{{_('开发中，敬请期待。。。')}}",
+        btns: [
+          {
+            label: "{{_('文档')}}",
+            link: "{{_('/hardware/zh/tang/tang-mega-60k/mega-60k.html')}}",
+          },
+          {
+            label: "{{_('购买')}}",
+            link: "{{_('https://sipeed.taobao.com')}}",
+            new_tab: true,
+          }
+        ],
+      },
+      {
+        img: "/static/home/Tang_Primer_15K.png",
+        title: "Tang Primer 15K",
+        brief: "{{_('开发中，敬请期待。。。')}}",
+        btns: [
+          {
+            label: "{{_('文档')}}",
+            link: "{{_('/hardware/zh/tang/tang-primer-15k/primer-15k.html')}}",
+          },
+          {
+            label: "{{_('购买')}}",
+            link: "{{_('https://sipeed.taobao.com')}}",
+            new_tab: true,
+          }
+        ],
+      },
     ],
   };
 </script>