Administrator/NANOKVM-sipeed_wiki-MIRROR
1
0
Fork 0
mirror of https://github.com/sipeed/sipeed_wiki.git synced 2026-09-11 00:22:49 -05:00
Code Issues Packages Projects Releases Wiki Activity

Corrected the description of PMOD part

Browse Source
This commit is contained in:
Rosemary_HSN
2025-02-18 17:18:25 +08:00
parent bd1a0e1028
commit bb14cfe5cd
1 changed files with 24 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
docs/hardware/en/tang/tang-console/mega-console.md
View File

@@ -57,16 +57,16 @@ Please refer to the link below:
| USB3 | 2 | SERDES lane, SuperSpeed @ 5Gbps (Device mode) |
| USB2 | 1 | IO Soft-PHY, HighSpeed @ 480Mbps (Device mode) |
| DVI(HDMI) | 1 | Compatible with HDMI, supports TX, can also be modified to RX |
| PMOD | 2 | Multiplexed with the the DVP CONN. & 2x20P header at the top of the Dock board |
| PMOD | 2 | Standard spacing (800mil), Compatible with dual PMOD modules |
| ADC | 2 | 2x differential input channels (One is used to measure the battery voltage) |
| RGB Interface | 1 | Supports RGB888 screen |
| SD Slot | 1 | 4-bit SDIO/MMC or SPI mode |
| RGB Interface | 1 | Supports RGB888 screen & RGB to VGA Converter |
| microSD Slot | 1 | 4-bit SDIO/MMC or SPI mode |
| BATT CONN. | 1 | Supports 3.7V li-on battery, with built-in charge management |
| FAN CONN. | 1 | Supports a 5V fan |
| FAN CONN. | 1 | Supports a 5V fan, maximum power: 1W |
| Speaker CONN. | 1 | Support mono output, 1x 2W Speaker |
| MS5351 | 1 | Provides RefClk for Serdes; control output via onboard UART |
| MS5351 | 1 | Provides RefClk for Serdes: control output via onboard UART |
| USB JTAG & UART | 1 | Supports FPGA programming and provides UART function |
| 2x20P headers | 2 | 2x20P header at the top of the Dock board multiplexed with the the PMOD & DVP CONN. |
| 2x20P headers | 2 | Independent 2x20P pin header, providing up to 2x38 IOs, can be modified to be compatible with DE10-Nano Kit |
## Hardware Resources
@@ -99,7 +99,15 @@ if the ip not work, try use "gowinlic.sipeed.com" domain's IP.
Install IDE [Click me](https://wiki.sipeed.com/hardware/zh/tang/common-doc/get_started/install-the-ide.html)
Example code [github](https://github.com/sipeed/TangMega-60K-example)
Example code (Github):
- [60K](https://github.com/sipeed/TangMega-60K-example)
- [138K](https://github.com/sipeed/TangMega-138K-example)
- [TangCores](https://github.com/nand2mario/tangcores)
Special Thanks: **[nand2mario](https://github.com/nand2mario)**
***
- Other Learning Resources
@@ -192,15 +200,19 @@ Tang Console can meet different needs of customers in various scenarios. For tec
<img src="./../assets/flash_mode_GAO.png" alt="flash_mode" width=35%>
2. Check the position of the DIP switch; the correct position is shown in the figure below:
<img src="./assets/dip-key_defualt.png" alt="dip-key_defualt" width=35%>
### No Response or Undesirable Pin Phenomenon After Burning
1. First, ensure that the IDE has selected the correct model **GW5AT-LV60PG484AC1/10**; every parameter in the figure below **MUST** be consistent.
1. First, ensure that the IDE has selected the correct model
- For MEGA 60K, **GW5AT-LV60PG484AC1/10**; every parameter in the figure below **MUST** be consistent.
<img src="../tang-mega-60k/assets/partno_60K.png" alt="device_choose" width=35%>
- For MEGA 138K, **GW5AST-LV138PG484AC1/10**; every parameter in the figure below **MUST** be consistent.
<img src="../tang-mega-138k/assets/partno_138K.png" alt="device_choose" width=35%>
<img src="./assets/partno_60K.png" alt="device_choose" width=35%>
2. Then, check your code and the corresponding simulation waveforms to meet the requirements. The GAO tools in GOWIN IDE maybe helpful. For more information, please refer to the GOWIN document [SUG100](https://www.gowinsemi.com/upload/database_doc/1885/document/660bb2366d0b3.pdf)(require login).