mirror of
https://github.com/sipeed/sipeed_wiki.git
synced 2026-11-09 17:44:31 -06:00
docs(slogic32u3): fix callouts and move firmware update to software guide
teedoc's markdown parser has no GitHub alert support, so `> [!WARNING]`, `> [!TIP]` and `> [!NOTE]` were rendered as literal text. Convert them to the repo's plain blockquote style (`> ⚠️ **lead.** ...` / `> 💡 ...`), which picks up the theme's blockquote bar. Covers the 10 Gbps USB warning and the USB-C tip on Quick Start, the AFE warning on the hardware guide, and the PulseView screenshot note on the software guide, zh and en. Also move the firmware update instructions from Hardware_Specification to Software_User_Guide: browser and driver requirements, the udev command, the download link, the five update steps and the failure fallback. The hardware page keeps its "更新固件" / "Firmware Update" heading -- the OTA page links to that anchor -- with a pointer to the software section and to the MODE/DFU notes. Quick Start next-step links and page intros follow the new split.
This commit is contained in:
lxowalle
@@ -2,6 +2,12 @@
|
||||
title: SLogic32U3 Hardware Guide
|
||||
keywords: SLogic32U3, hardware, Mini-HDMI, probe, ACT indicator, MODE, DFU, firmware, signal integrity, udev
|
||||
update:
|
||||
- date: 2026-10-22
|
||||
version: v0.4
|
||||
author: Sipeed
|
||||
content:
|
||||
- Moved the firmware update instructions to the Software Guide; only a pointer stays here
|
||||
- Converted callouts to blockquotes that teedoc can parse
|
||||
- date: 2026-10-06
|
||||
version: v0.3
|
||||
author: Sipeed
|
||||
@@ -23,7 +29,7 @@ update:
|
||||
|
||||
# Hardware Guide
|
||||
|
||||
This page covers the SLogic32U3 hardware interfaces, accessories, indicators, firmware update and probing essentials. For software use see the [Software Guide](./Software_User_Guide.md); to get started see the [Quick Start](./Quick_Start.md).
|
||||
This page covers the SLogic32U3 hardware interfaces, accessories, indicators and probing essentials. Firmware updates, host apps and other software topics are in the [Software Guide](./Software_User_Guide.md); for first use see the [Quick Start](./Quick_Start.md).
|
||||
|
||||
---
|
||||
|
||||
@@ -142,8 +148,7 @@ The front-end network per signal on the daughter board: the coaxial core goes th
|
||||
|
||||
### Putting a Mini-HDMI on your own board?
|
||||
|
||||
> [!WARNING]
|
||||
> **Be sure to include the AFE circuit.**
|
||||
> ⚠️ **Be sure to include the AFE circuit.**
|
||||
>
|
||||
> The Mini-HDMI connector is just a connector; the SLogic32U3 input characteristics (100 kΩ input impedance, bandwidth, overshoot suppression) come from the AFE network on the probe daughter board. If your board solders signals straight to the Mini-HDMI pins and omits the AFE, you get:
|
||||
>
|
||||
@@ -234,28 +239,9 @@ The indicator is a 3-color RGB: **blue = power, green = USB LINK, red = run stat
|
||||
|
||||
## Firmware Update
|
||||
|
||||
SLogic32U3 firmware is updated online with the web tool **[SLogic Firmware Update](https://slogic.sipeed.com/ota/)** (https://slogic.sipeed.com/ota/) — nothing to download or install.
|
||||
Firmware is updated online with a web tool. The **full procedure, browser and driver requirements, and firmware download links** are in [Software Guide · Firmware Update](./Software_User_Guide.html#Firmware-Update).
|
||||
|
||||
- **Browser**: Chrome, Edge or another Chromium-based browser on a computer (updates use WebUSB, which Firefox and Safari do not support).
|
||||
- **Driver**: no driver is needed on Windows. On Linux, run the following once to allow your user to access the analyzer, then re-plug it (the page shows it too):
|
||||
```bash
|
||||
sudo tee /etc/udev/rules.d/60-slogic.rules >/dev/null <<'END'
|
||||
SUBSYSTEM=="usb", ATTRS{idVendor}=="359f", ATTRS{idProduct}=="0300|3031|3032|30f1|30f2", MODE="0666", TAG+="uaccess"
|
||||
END
|
||||
sudo udevadm control --reload-rules && sudo udevadm trigger
|
||||
```
|
||||
- **USB cable**: use a USB data cable plugged directly into the computer, not a charging-only cable or an unpowered hub.
|
||||
- **Firmware downloads**: [SLogic32U3 firmware](https://dl.sipeed.com/shareURL/SLogic/SLogic32U3/4_Firmware) (`app.bin`); future updates are published here too.
|
||||
|
||||
### Update steps
|
||||
|
||||
1. Download the latest firmware file.
|
||||
2. Open [https://slogic.sipeed.com/ota/](https://slogic.sipeed.com/ota/) in Chrome / Edge, connect the SLogic32U3 with a USB cable and click **Select device**.
|
||||
3. The page restarts the SLogic32U3 in update mode automatically (LED cyan with a slow red blink); select the update-mode device (usually shown as "SLogic DFU") in the browser dialog. You can also enter update mode by pressing the recessed MODE button with a pin.
|
||||
4. Choose the downloaded firmware file and click **Update firmware**. Keep the device connected and the page open until the update finishes.
|
||||
5. When the update finishes the device restarts with the new firmware (LED steady cyan) and returns to APP mode.
|
||||
|
||||
> In principle the update only replaces the SLogic firmware and never touches the **DFU** (update-mode) function. Even if an update fails, the device stays in update mode — keep it connected and run the update again.
|
||||
During an update the device enters DFU mode (LED steady cyan with a slow red blink). You can also enter it by pressing the recessed MODE button on the rear with a pin; see [MODE Button](#MODE-Button) above for the button and mode details.
|
||||
|
||||
---
|
||||
|
||||
|
||||
@@ -2,6 +2,12 @@
|
||||
title: SLogic32U3 Quick Start
|
||||
keywords: SLogic32U3, Quick Start, unboxing, install, SLogicView, SLogicWeb, udev
|
||||
update:
|
||||
- date: 2026-10-22
|
||||
version: v0.2
|
||||
author: Sipeed
|
||||
content:
|
||||
- Converted callouts to blockquotes that teedoc can parse
|
||||
- Firmware update now lives in the Software Guide
|
||||
- date: 2026-10-06
|
||||
version: v0.1
|
||||
author: Sipeed
|
||||
@@ -62,8 +68,7 @@ Download the package for your platform from the [GitHub Release](https://github.
|
||||
|
||||
## Connect the device
|
||||
|
||||
> [!WARNING]
|
||||
> **Use a 10 Gbps USB port.** The port spec directly determines the capture rate:
|
||||
> ⚠️ **Use a 10 Gbps USB port.** The port spec directly determines the capture rate:
|
||||
>
|
||||
> - Only a **USB3.2 Gen2 (10 Gbps)** port can sustain 800 MB/s and reach the rated rate combinations.
|
||||
> - A USB3.0 / 3.1 Gen1 (5 Gbps) port will be clearly below expectation.
|
||||
@@ -71,8 +76,7 @@ Download the package for your platform from the [GitHub Release](https://github.
|
||||
>
|
||||
> A 10 Gbps port is usually marked `SS10` or `10`. Blue alone is not reliable — many blue ports are only 5 Gbps. Check your motherboard or laptop spec.
|
||||
|
||||
> [!TIP]
|
||||
> **Prefer a direct USB-C connection.** The bundled cable includes a C-to-A adapter for A ports, but the adapter adds insertion loss and lowers signal quality. On a weaker PC this can keep the rate from reaching full speed. Use the USB-C port directly when you can.
|
||||
> 💡 **Prefer a direct USB-C connection.** The bundled cable includes a C-to-A adapter for A ports, but the adapter adds insertion loss and lowers signal quality. On a weaker PC this can keep the rate from reaching full speed. Use the USB-C port directly when you can.
|
||||
|
||||
Steps:
|
||||
|
||||
@@ -122,8 +126,8 @@ Capturing one UART line, for example:
|
||||
|
||||
## Next steps
|
||||
|
||||
- Hardware interfaces, accessories, indicators, firmware update, signal integrity → [Hardware Guide](./Hardware_Specification.md)
|
||||
- Differences between host apps and the web app, triggers, decoding, command line → [Software Guide](./Software_User_Guide.md)
|
||||
- Hardware interfaces, accessories, indicators, signal integrity → [Hardware Guide](./Hardware_Specification.md)
|
||||
- Differences between host apps and the web app, triggers, decoding, command line, firmware update → [Software Guide](./Software_User_Guide.md)
|
||||
- GPU acceleration and mixed-signal analysis → [ngscopeclient](../ngscopeclient/ngscopeclient.md)
|
||||
- Let AI run capture and decoding for you → [SLogic with an AI Agent](../slogic_agent/readme.md)
|
||||
- Troubleshooting → [FAQ](./FAQ.md)
|
||||
|
||||
@@ -1,7 +1,13 @@
|
||||
---
|
||||
title: SLogic32U3 Software Guide
|
||||
keywords: SLogic32U3, SLogicView, SLogicWeb, ALL LOGIC, DSView, ngscopeclient, sigrok-cli, WebUSB, protocol decoding
|
||||
keywords: SLogic32U3, SLogicView, SLogicWeb, ALL LOGIC, DSView, ngscopeclient, sigrok-cli, WebUSB, protocol decoding, firmware update, OTA
|
||||
update:
|
||||
- date: 2026-10-22
|
||||
version: v0.4
|
||||
author: Sipeed
|
||||
content:
|
||||
- Added a firmware update section, taking over the instructions migrated from the Hardware Guide
|
||||
- Converted callouts to blockquotes that teedoc can parse
|
||||
- date: 2026-10-06
|
||||
version: v0.3
|
||||
author: Sipeed
|
||||
@@ -94,8 +100,7 @@ The web app talks to the device over **WebUSB**, so a **Chromium-based browser**
|
||||
|
||||
## SLogicView
|
||||
|
||||
> [!NOTE]
|
||||
> The decoder-list figures in the Protocol decoding section still use PulseView screenshots from the same code base (identical decoders and workflow); the rest are now actual SLogicView captures and screen recordings.
|
||||
> 💡 The decoder-list figures in the Protocol decoding section still use PulseView screenshots from the same code base (identical decoders and workflow); the rest are now actual SLogicView captures and screen recordings.
|
||||
|
||||
### Connect the device
|
||||
|
||||
@@ -296,6 +301,33 @@ Common options:
|
||||
|
||||
---
|
||||
|
||||
## Firmware Update
|
||||
|
||||
SLogic32U3 firmware is updated online with the web tool **[SLogic Firmware Update](https://slogic.sipeed.com/ota/)** — nothing to download or install.
|
||||
|
||||
- **Browser**: Chrome, Edge or another Chromium-based browser on a computer (updates use WebUSB, which Firefox and Safari do not support).
|
||||
- **Driver**: no driver is needed on Windows. On Linux, run the following once to allow your user to access the analyzer, then re-plug it (the page shows it too):
|
||||
```bash
|
||||
sudo tee /etc/udev/rules.d/60-slogic.rules >/dev/null <<'END'
|
||||
SUBSYSTEM=="usb", ATTRS{idVendor}=="359f", ATTRS{idProduct}=="0300|3031|3032|30f1|30f2", MODE="0666", TAG+="uaccess"
|
||||
END
|
||||
sudo udevadm control --reload-rules && sudo udevadm trigger
|
||||
```
|
||||
- **USB cable**: use a USB data cable plugged directly into the computer, not a charging-only cable or an unpowered hub. A 10 Gbps port is recommended; see [Quick Start · Connect the device](./Quick_Start.html#Connect-the-device).
|
||||
- **Firmware downloads**: [SLogic32U3 firmware](https://dl.sipeed.com/shareURL/SLogic/SLogic32U3/4_Firmware) (`app.bin`); future updates are published here too.
|
||||
|
||||
### Update steps
|
||||
|
||||
1. Download the latest firmware file.
|
||||
2. Open [https://slogic.sipeed.com/ota/](https://slogic.sipeed.com/ota/) in Chrome / Edge, connect the SLogic32U3 with a USB cable and click **Select device**.
|
||||
3. The page restarts the SLogic32U3 in update mode automatically (LED cyan with a slow red blink); select the update-mode device (usually shown as "SLogic DFU") in the browser dialog. You can also enter update mode by pressing the recessed MODE button with a pin; see [Hardware Guide · MODE Button](./Hardware_Specification.html#MODE-Button).
|
||||
4. Choose the downloaded firmware file and click **Update firmware**. Keep the device connected and the page open until the update finishes.
|
||||
5. When the update finishes the device restarts with the new firmware (LED steady cyan) and returns to APP mode.
|
||||
|
||||
> In principle the update only replaces the SLogic firmware and never touches the **DFU** (update-mode) function. Even if an update fails, the device stays in update mode — keep it connected and run the update again.
|
||||
|
||||
---
|
||||
|
||||
## Known Limits
|
||||
|
||||
| Limit | Notes |
|
||||
|
||||
@@ -2,6 +2,12 @@
|
||||
title: SLogic32U3 硬件使用指南
|
||||
keywords: SLogic32U3, 硬件, Mini-HDMI, 探头, ACT 指示灯, MODE, DFU, 固件更新, 信号完整性, udev
|
||||
update:
|
||||
- date: 2026-10-22
|
||||
version: v0.4
|
||||
author: Sipeed
|
||||
content:
|
||||
- 更新固件说明迁移到软件使用指南，本页只保留入口
|
||||
- 提示块改为 teedoc 可解析的引用块格式
|
||||
- date: 2026-10-06
|
||||
version: v0.3
|
||||
author: Sipeed
|
||||
@@ -24,7 +30,7 @@ update:
|
||||
|
||||
# 硬件使用指南
|
||||
|
||||
本页介绍 SLogic32U3 的硬件接口、配件、指示灯、固件更新与探测要点。软件操作见[软件使用指南](./Software_User_Guide.md)，快速上手见[快速上手](./Quick_Start.md)。
|
||||
本页介绍 SLogic32U3 的硬件接口、配件、指示灯与探测要点。固件升级、上位机用法等软件相关内容见[软件使用指南](./Software_User_Guide.md)，第一次使用见[快速上手](./Quick_Start.md)。
|
||||
|
||||
---
|
||||
|
||||
@@ -143,8 +149,7 @@ SLogic32U3 为 CNC 铝合金一体外壳，尺寸 59 × 51 × 13 mm，表面散
|
||||
|
||||
### 想在自己板上放 Mini-HDMI 对插？
|
||||
|
||||
> [!WARNING]
|
||||
> **务必补上 AFE 部分电路。**
|
||||
> ⚠️ **务必补上 AFE 部分电路。**
|
||||
>
|
||||
> Mini-HDMI 接口本身只是连接器，SLogic32U3 的输入特性（100 kΩ 输入阻抗、带宽与过冲抑制）由探头子板上的 AFE 网络决定。如果你的板子只把信号直接焊到 Mini-HDMI 引脚上、省掉 AFE，会出现：
|
||||
>
|
||||
@@ -235,28 +240,9 @@ SLogic32U3 可选配 4 通道 ADC 模组，把对应管脚采样**作为 8-bit
|
||||
|
||||
## 更新固件
|
||||
|
||||
SLogic32U3 的固件通过网页工具在线升级：**[SLogic 固件升级](https://slogic.sipeed.com/ota/)**（`https://slogic.sipeed.com/ota/`），无需下载或安装任何程序。
|
||||
固件通过网页工具在线升级，**完整的操作步骤、浏览器与驱动要求、固件下载地址**都见[软件使用指南 · 更新固件](./Software_User_Guide.html#更新固件)。
|
||||
|
||||
- **浏览器**：电脑上的 Chrome、Edge 等 Chromium 内核浏览器（升级基于 WebUSB，Firefox / Safari 不支持）。
|
||||
- **驱动**：Windows 无需安装驱动；Linux 需先执行一次以下命令授予当前用户访问权限，然后重新插拔设备（网页上也会给出）：
|
||||
```bash
|
||||
sudo tee /etc/udev/rules.d/60-slogic.rules >/dev/null <<'END'
|
||||
SUBSYSTEM=="usb", ATTRS{idVendor}=="359f", ATTRS{idProduct}=="0300|3031|3032|30f1|30f2", MODE="0666", TAG+="uaccess"
|
||||
END
|
||||
sudo udevadm control --reload-rules && sudo udevadm trigger
|
||||
```
|
||||
- **USB 线**：使用支持数据传输的 USB 线直接连接电脑，不要用仅充电线或无供电的集线器。
|
||||
- **固件下载**：[SLogic32U3 固件下载站](https://dl.sipeed.com/shareURL/SLogic/SLogic32U3/4_Firmware)（`app.bin`），后续更新也发布在此。
|
||||
|
||||
### 更新步骤
|
||||
|
||||
1. 下载最新固件文件。
|
||||
2. 用 Chrome / Edge 打开 [https://slogic.sipeed.com/ota/](https://slogic.sipeed.com/ota/)，用 USB 线连接 SLogic32U3，点击 **选择设备**。
|
||||
3. 页面会自动把 SLogic32U3 重启到升级模式（指示灯青色常亮 + 红色慢闪），按提示在浏览器弹窗中选择升级模式设备（通常显示为 "SLogic DFU"）。也可先用卡针按背面的 MODE 小孔按键手动进入升级模式。
|
||||
4. 选择下载的固件文件，点击 **开始升级**。升级完成前保持设备连接，不要关闭页面。
|
||||
5. 升级完成后设备自动以新固件重启（指示灯青色常亮），回到 APP 模式。
|
||||
|
||||
> 理论上，升级只会更新 SLogic 固件，不会影响 **DFU**（升级模式）功能。因此即使升级失败也不要紧：设备会停留在升级模式，保持连接后重新升级即可。
|
||||
升级时设备会进入 DFU 模式（指示灯青色常亮 + 红色慢闪），也可以先用卡针按背面的 MODE 小孔按键手动进入，按键位置与模式说明见上文 [MODE 按键](#MODE-按键)。
|
||||
|
||||
---
|
||||
|
||||
|
||||
@@ -2,6 +2,12 @@
|
||||
title: SLogic32U3 快速上手
|
||||
keywords: SLogic32U3, 快速上手, 开箱, 安装, SLogicView, SLogicWeb, udev
|
||||
update:
|
||||
- date: 2026-10-22
|
||||
version: v0.2
|
||||
author: Sipeed
|
||||
content:
|
||||
- 提示块改为 teedoc 可解析的引用块格式
|
||||
- 固件升级指引改由软件使用指南承载
|
||||
- date: 2026-10-06
|
||||
version: v0.1
|
||||
author: Sipeed
|
||||
@@ -62,8 +68,7 @@ SLogic32U3 有多套上位机可选。**默认用 SLogicView**，它是 Sipeed
|
||||
|
||||
## 连接设备
|
||||
|
||||
> [!WARNING]
|
||||
> **务必接到 10 Gbps 的 USB 口。** 接口规格直接决定采集速率：
|
||||
> ⚠️ **务必接到 10 Gbps 的 USB 口。** 接口规格直接决定采集速率：
|
||||
>
|
||||
> - 接 **USB3.2 Gen2（10 Gbps）** 口才能跑满 800 MB/s，达到标称的采样率组合。
|
||||
> - 接 USB3.0 / 3.1 Gen1（5 Gbps）口，速率会明显低于预期。
|
||||
@@ -71,8 +76,7 @@ SLogic32U3 有多套上位机可选。**默认用 SLogicView**，它是 Sipeed
|
||||
>
|
||||
> 电脑上的 10 Gbps 口通常标有 `SS10` 或 `10` 字样。只看蓝色并不可靠，蓝色口很多只是 5 Gbps。请查阅主板或笔记本的接口规格确认。
|
||||
|
||||
> [!TIP]
|
||||
> **优先使用 USB-C 口直连。** 随附线材虽然配了 C 转 A 转接头以兼容 A 口，但转接头本身会带来额外插损，降低信号质量。在性能较弱的电脑上，这可能导致速率跑不满。条件允许时请直接插 USB-C 口。
|
||||
> 💡 **优先使用 USB-C 口直连。** 随附线材虽然配了 C 转 A 转接头以兼容 A 口，但转接头本身会带来额外插损，降低信号质量。在性能较弱的电脑上，这可能导致速率跑不满。条件允许时请直接插 USB-C 口。
|
||||
|
||||
连接步骤：
|
||||
|
||||
@@ -122,8 +126,8 @@ SLogic32U3 有多套上位机可选。**默认用 SLogicView**，它是 Sipeed
|
||||
|
||||
## 下一步
|
||||
|
||||
- 硬件接口、配件、指示灯、固件更新、信号完整性 → [硬件使用指南](./Hardware_Specification.md)
|
||||
- 各上位机与网页版的区别、触发、解码、命令行 → [软件使用指南](./Software_User_Guide.md)
|
||||
- 硬件接口、配件、指示灯、信号完整性 → [硬件使用指南](./Hardware_Specification.md)
|
||||
- 各上位机与网页版的区别、触发、解码、命令行、固件升级 → [软件使用指南](./Software_User_Guide.md)
|
||||
- GPU 加速与混合信号分析 → [ngscopeclient](../ngscopeclient/ngscopeclient.md)
|
||||
- 让 AI 代跑采集与解码 → [SLogic 接入 AI Agent](../slogic_agent/readme.md)
|
||||
- 排障 → [常见问题](./FAQ.md)
|
||||
|
||||
@@ -1,7 +1,13 @@
|
||||
---
|
||||
title: SLogic32U3 软件使用指南
|
||||
keywords: SLogic32U3, SLogicView, SLogicWeb, ALL LOGIC, DSView, ngscopeclient, sigrok-cli, WebUSB, 协议解码
|
||||
keywords: SLogic32U3, SLogicView, SLogicWeb, ALL LOGIC, DSView, ngscopeclient, sigrok-cli, WebUSB, 协议解码, 固件升级, OTA
|
||||
update:
|
||||
- date: 2026-10-22
|
||||
version: v0.4
|
||||
author: Sipeed
|
||||
content:
|
||||
- 新增更新固件章节，接收从硬件使用指南迁移来的升级说明
|
||||
- 提示块改为 teedoc 可解析的引用块格式
|
||||
- date: 2026-10-06
|
||||
version: v0.3
|
||||
author: Sipeed
|
||||
@@ -94,8 +100,7 @@ SLogic32U3 可以用多套上位机驱动。本页先帮你选，再分别讲各
|
||||
|
||||
## SLogicView
|
||||
|
||||
> [!NOTE]
|
||||
> 协议解码一节的解码器列表截图暂用同源的 PulseView 界面（解码器与操作逻辑一致），其余已更新为 SLogicView 实机界面与录屏。
|
||||
> 💡 协议解码一节的解码器列表截图暂用同源的 PulseView 界面（解码器与操作逻辑一致），其余已更新为 SLogicView 实机界面与录屏。
|
||||
|
||||
### 连接设备
|
||||
|
||||
@@ -296,6 +301,33 @@ sigrok-cli -i capture.sr -O vcd > capture.vcd
|
||||
|
||||
---
|
||||
|
||||
## 更新固件
|
||||
|
||||
SLogic32U3 的固件通过网页工具在线升级：**[SLogic 固件升级](https://slogic.sipeed.com/ota/)**，无需下载或安装任何程序。
|
||||
|
||||
- **浏览器**：电脑上的 Chrome、Edge 等 Chromium 内核浏览器（升级基于 WebUSB，Firefox / Safari 不支持）。
|
||||
- **驱动**：Windows 无需安装驱动；Linux 需先执行一次以下命令授予当前用户访问权限，然后重新插拔设备（网页上也会给出）：
|
||||
```bash
|
||||
sudo tee /etc/udev/rules.d/60-slogic.rules >/dev/null <<'END'
|
||||
SUBSYSTEM=="usb", ATTRS{idVendor}=="359f", ATTRS{idProduct}=="0300|3031|3032|30f1|30f2", MODE="0666", TAG+="uaccess"
|
||||
END
|
||||
sudo udevadm control --reload-rules && sudo udevadm trigger
|
||||
```
|
||||
- **USB 线**：使用支持数据传输的 USB 线直接连接电脑，不要用仅充电线或无供电的集线器。建议接 10 Gbps 口，理由见[快速上手 · 连接设备](./Quick_Start.html#连接设备)。
|
||||
- **固件下载**：[SLogic32U3 固件下载站](https://dl.sipeed.com/shareURL/SLogic/SLogic32U3/4_Firmware)（`app.bin`），后续更新也发布在此。
|
||||
|
||||
### 更新步骤
|
||||
|
||||
1. 下载最新固件文件。
|
||||
2. 用 Chrome / Edge 打开 [https://slogic.sipeed.com/ota/](https://slogic.sipeed.com/ota/)，用 USB 线连接 SLogic32U3，点击 **选择设备**。
|
||||
3. 页面会自动把 SLogic32U3 重启到升级模式（指示灯青色常亮 + 红色慢闪），按提示在浏览器弹窗中选择升级模式设备（通常显示为 "SLogic DFU"）。也可先用卡针按背面的 MODE 小孔按键手动进入升级模式，按键说明见[硬件使用指南 · MODE 按键](./Hardware_Specification.html#MODE-按键)。
|
||||
4. 选择下载的固件文件，点击 **开始升级**。升级完成前保持设备连接，不要关闭页面。
|
||||
5. 升级完成后设备自动以新固件重启（指示灯青色常亮），回到 APP 模式。
|
||||
|
||||
> 理论上，升级只会更新 SLogic 固件，不会影响 **DFU**（升级模式）功能。因此即使升级失败也不要紧：设备会停留在升级模式，保持连接后重新升级即可。
|
||||
|
||||
---
|
||||
|
||||
## 已知限制
|
||||
|
||||
| 限制 | 说明 |
|
||||
|
||||
Reference in New Issue
Block a user