docs(slogic32u3): add SLogicView screenshots and screen recordings

- SLogicView section uses trimmed screen-recording demos: main window,
  Configure panel (channel count / sample rate), sample depth, threshold,
  channel order, waveform browsing, cursors, and live PWM decode
- Replace the PulseView placeholder images; keep the two decoder reference
  figures and the SLogicWeb UI shot
- Fix waveform navigation shortcuts (drag=pan; wheel or -/+ zoom;
  Shift/Alt+wheel horizontal; Ctrl+wheel vertical); cursors via the toolbar

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

docs/hardware/en/logic_analyzer/slogic32u3/Software_User_Guide.md

@@ -95,7 +95,7 @@ The web app talks to the device over **WebUSB**, so a **Chromium-based browser**
 ## SLogicView
 
 > [!NOTE]
-> The figures in this section use PulseView screenshots from the same code base; SLogicView works the same way. They will be updated to SLogicView screenshots in a later revision.
+> The decoder-list figures in the Protocol decoding section still use PulseView screenshots from the same code base (identical decoders and workflow); the rest are now actual SLogicView captures and screen recordings.
 
 ### Connect the device
 
@@ -103,7 +103,7 @@ Best practice: **connect the device to a USB3 port first, then launch the app**
 
 If the app is already running, click **Connect to Device**, choose the driver, click **Scan**, then select the device found.
 
-![SLogicView main window](../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/pulseview-overview.jpg)
+<video src="../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/slogicview-overview.mp4" autoplay loop muted playsinline></video>
 
 The main window has a few areas:
 
@@ -141,15 +141,17 @@ This means no trade-off between "capture depth" and "sample rate" — you can ca
 
 For reference, the USB3.0-based DreamSourceLab DSLogic U3Pro32 in Stream mode is roughly 16ch@125MHz, 32ch@50MHz (per its public datasheet); the SLogic32U3 is 16ch@400MHz, 32ch@200MHz, about 3–4× the stream rate.
 
-![Channel configuration](../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/pulseview-channels.jpg)
+<video src="../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/slogicview-channel-samplerate.mp4" autoplay loop muted playsinline></video>
+
+> The clip above: switching the channel count (32 / 16 / 8 / 4) in the Configure panel changes the available sample rate.
 
 Captured channels can be recolored, resized and reordered in the view so related buses sit together (display only, does not affect capture):
 
-![Custom channel order](../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/pv-channel-order.webp)
+<video src="../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/slogicview-channel-order.mp4" autoplay loop muted playsinline></video>
 
 ### How to choose the sample rate
 
-![Sample settings](../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/pv-sample-settings.webp)
+<video src="../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/slogicview-sample-depth.mp4" autoplay loop muted playsinline></video>
 
 - Rule of thumb: **10–100×** the highest frequency of the signal.
 - Too low and you miss edges, distorting the waveform or failing the decode.
@@ -158,7 +160,7 @@ Captured channels can be recolored, resized and reordered in the view so related
 
 ### Voltage threshold
 
-![Adjust the threshold](../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/pv-threshold.webp)
+<video src="../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/slogicview-threshold.mp4" autoplay loop muted playsinline></video>
 
 Set the logic decision threshold in the left channel bar, 0–6 V in 0.1 V steps. Below it = 0, above it = 1. For suggested thresholds per logic level see the [Hardware Guide](./Hardware_Specification.md#threshold-voltage).
 
@@ -175,20 +177,18 @@ The SLogic32U3 supports **multi-channel, multi-edge combination triggers**. You
 
 ### Browsing and cursor measurement
 
-![Zoom and pan](../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/pv-zoom.webp)
-
-![Waveform browsing](../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/pulseview-waveform.jpg)
+<video src="../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/slogicview-waveform.mp4" autoplay loop muted playsinline></video>
 
 | Action | How |
 | - | - |
-| Horizontal zoom | scroll wheel |
-| Horizontal pan | drag with left button, or Shift + wheel |
+| Pan the view | hold the left button and drag |
+| Horizontal zoom (time) | scroll wheel, or `−` / `+` |
+| Horizontal pan (time axis) | Shift + wheel, or Alt + wheel |
 | Vertical pan | Ctrl + wheel |
-| Create a measurement cursor | Shift + drag |
 
-Measure the time between two points with cursors to derive baud rate, pulse width, event interval and so on.
+Add cursors from the **Cursors** toolbar button, then measure the time between two points to derive baud rate, pulse width, event interval and so on.
 
-![Cursor measurement](../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/pv-measure.webp)
+<video src="../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/slogicview-cursors.mp4" autoplay loop muted playsinline></video>
 
 ### Protocol decoding
 
@@ -196,6 +196,10 @@ Measure the time between two points with cursors to derive baud rate, pulse widt
 
 ![Multi-protocol decoding](../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/pulseview-multi-decode.jpg)
 
+<video src="../../../zh/logic_analyzer/slogic32u3/assets/Screenshots/slogicview-decode-pwm.mp4" autoplay loop muted playsinline></video>
+
+> SLogicView decoding a live PWM signal.
+
 The sigrok ecosystem offers 150+ protocol decoders covering I²C, SPI, UART, CAN, SDIO, 1-Wire, USB, Modbus and other common buses.
 
 1. Open the Decoder panel and choose the protocol.

docs/hardware/zh/logic_analyzer/slogic32u3/Software_User_Guide.md

@@ -95,7 +95,7 @@ SLogic32U3 可以用多套上位机驱动。本页先帮你选，再分别讲各
 ## SLogicView
 
 > [!NOTE]
-> 本节配图暂用同源的 PulseView 界面截图，SLogicView 的操作逻辑与之一致。截图将在后续版本更新为 SLogicView 实机界面。
+> 协议解码一节的解码器列表截图暂用同源的 PulseView 界面（解码器与操作逻辑一致），其余已更新为 SLogicView 实机界面与录屏。
 
 ### 连接设备
 
@@ -103,7 +103,7 @@ SLogic32U3 可以用多套上位机驱动。本页先帮你选，再分别讲各
 
 若软件已在运行，点 **Connect to Device**，选择驱动后点 **Scan**，再选中扫描到的设备。
 
-![SLogicView 主界面](./assets/Screenshots/pulseview-overview.jpg)
+<video src="./assets/Screenshots/slogicview-overview.mp4" autoplay loop muted playsinline></video>
 
 主界面分为几个区域：
 
@@ -141,15 +141,17 @@ SLogic32U3 采用 **Stream（流式）模式**：数据实时回传上位机，
 
 作为参照，USB3.0 方案的 DreamSourceLab DSLogic U3Pro32 在 Stream 模式下约为 16ch@125MHz、32ch@50MHz（据其公开 Datasheet）；SLogic32U3 对应为 16ch@400MHz、32ch@200MHz，Stream 采样率约为其 3 ~ 4 倍。
 
-![通道配置](./assets/Screenshots/pulseview-channels.jpg)
+<video src="./assets/Screenshots/slogicview-channel-samplerate.mp4" autoplay loop muted playsinline></video>
+
+> 上方动图：在 Configure 面板切换通道数（32 / 16 / 8 / 4），可用采样率随之变化。
 
 采集到的通道可以在视图里改色、调整高度与排列顺序，把相关的总线放到一起看（仅影响显示，不影响采集）：
 
-![自定义通道顺序](./assets/Screenshots/pv-channel-order.webp)
+<video src="./assets/Screenshots/slogicview-channel-order.mp4" autoplay loop muted playsinline></video>
 
 ### 采样率怎么选
 
-![采样参数设置](./assets/Screenshots/pv-sample-settings.webp)
+<video src="./assets/Screenshots/slogicview-sample-depth.mp4" autoplay loop muted playsinline></video>
 
 - 经验法则：取被测信号最高频率的 **10 ~ 100 倍**。
 - 采样率过低会错过边沿，导致波形失真甚至解码失败。
@@ -158,7 +160,7 @@ SLogic32U3 采用 **Stream（流式）模式**：数据实时回传上位机，
 
 ### 电压阈值
 
-![调整电压阈值](./assets/Screenshots/pv-threshold.webp)
+<video src="./assets/Screenshots/slogicview-threshold.mp4" autoplay loop muted playsinline></video>
 
 在左侧通道栏设置逻辑判决阈值，范围 0 ~ 6 V，步进 0.1 V。低于阈值判为 0，高于判为 1。常见逻辑电平的建议阈值见[硬件使用指南](./Hardware_Specification.md#阈值电压)。
 
@@ -175,20 +177,18 @@ SLogic32U3 支持**多通道、多边沿组合触发**。可对多个通道分
 
 ### 浏览与光标测量
 
-![波形缩放与拖拽](./assets/Screenshots/pv-zoom.webp)
-
-![波形浏览](./assets/Screenshots/pulseview-waveform.jpg)
+<video src="./assets/Screenshots/slogicview-waveform.mp4" autoplay loop muted playsinline></video>
 
 | 操作 | 方式 |
 | - | - |
-| 水平缩放 | 鼠标滚轮 |
-| 水平平移 | 左键拖动，或 Shift + 滚轮 |
-| 垂直平移 | Ctrl + 滚轮 |
-| 创建测量光标 | Shift + 拖动 |
+| 拖动查看视图 | 左键按住拖动 |
+| 水平缩放（时域） | 滚轮，或 `−` / `+` 键 |
+| 水平移动（横轴） | Shift + 滚轮，或 Alt + 滚轮 |
+| 垂直移动（纵轴） | Ctrl + 滚轮 |
 
-用光标测量两点时间差，可直接换算波特率、脉宽、事件间隔等参数。
+点工具栏 **Cursors** 添加测量光标，测量两点时间差即可换算波特率、脉宽、事件间隔等参数。
 
-![光标测量](./assets/Screenshots/pv-measure.webp)
+<video src="./assets/Screenshots/slogicview-cursors.mp4" autoplay loop muted playsinline></video>
 
 ### 协议解码
 
@@ -196,6 +196,10 @@ SLogic32U3 支持**多通道、多边沿组合触发**。可对多个通道分
 
 ![多协议并行解码](./assets/Screenshots/pulseview-multi-decode.jpg)
 
+<video src="./assets/Screenshots/slogicview-decode-pwm.mp4" autoplay loop muted playsinline></video>
+
+> 上方动图：SLogicView 实时解码 PWM 信号。
+
 sigrok 生态提供 150+ 协议解码器，覆盖 I²C、SPI、UART、CAN、SDIO、1-Wire、USB、Modbus 等常见总线。
 
 1. 打开 Decoder 面板，选择要用的协议。