chore(assets): deduplicate zh/en mirrored images
早期文档的素材基本是中英共用一套，却在 docs/.../zh/ 和 docs/.../en/ 各存了一份完全相同的文件。251 组镜像副本，白占 39.5MB。 只处理「路径仅差语言段」的镜像组：保留 zh 作为规范副本，删除 en 副本， 把 en 页面的引用改向 zh（32U3 已经是这个约定）。引用改写基于解析后的 目标文件而非字符串匹配，共 39 个页面 214 处；文件读写保留原始行尾。 跨产品的重复没有动——tang-primer-20k 与 25k、lc3a 与 lc4a 虽然碰巧 共用同一张图，但文件名本就不同，合并会制造耦合：以后更新一个产品的 图会让另一个产品的文档悄悄跟着变。为省空间绑定两条独立产品线不划算。 验证：断链 5 -> 5（新增 0），构建通过，抽查英文页图片全部可取到。
zepan
@@ -14,9 +14,9 @@ update:
|
||||
The LicheePi Module 3A is a core module that utilizes [SpaceMIT](https://spacemit.com/) [K1](https://www.spacemit.com/key-stone-k1/) as the main controller. The main controller features an octa-core X60 CPU (RV64GCV, 256-bit Vector 1.0), offering 2 TOPS@int8 AI computing power and 1080P video processing capabilities. It supports up to 16GB of LPDDR4X memory and 128GB of eMMC storage, dual gigabit Ethernet, 1080P resolution video output, and PCIE Gen2x2. The LicheePi Module 3A is compatible with the LM4A and can be directly replaced on the baseboard.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## Basic Parameter
|
||||
|
||||
|
||||
@@ -13,19 +13,19 @@ update:
|
||||
|
||||
LicheePi 3A is based on the [Lichee Module 3A](http://wiki.sipeed.com/hardware/zh/lichee/K1/lm3a.html)high-performance RISC-V Linux development board for the core board, with [K1](https://www.spacemit.com/key-stone-k1/) SOC（ 8xX60@1.6G ， RV64GCV， 2TOPS@int8 NPU， 20GFLOP GPU）， Onboard maximum 16GB 32-bit LPDDR4X, 128GB eMMC, supports HDMI+MIPI dual 1080P display output, supports 16MP camera access, dual gigabit Ethernet ports (one of which supports POE power supply) and 4 USB3.0 interfaces, as well as 2 PCIE Gen2x2 channels, multiple audio input and output.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
LicheePi 3A is currently the most cost-effective mid-range RISC-V SBC. Multi core performance comparable to the previous generation RISC-V SBC [LPi4A](http://wiki.sipeed.com/hardware/zh/lichee/th1520/lpi4a.html) 80%, with a single core performance of approximately 50%
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
LicheePi 3A can be used as a typical RISC-V verification platform, and its powerful performance enables fast local compilation without the need for QEMU compilation.
|
||||
LicheePi 3A is basically compatible with LicheePi4A. If you have purchased LicheePi4A, you can only purchase LM3A to install on the LPi4A motherboard (without M.2 interface).
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## Basic Parameter
|
||||
|
||||
@@ -14,17 +14,17 @@ update:
|
||||
### Basic Suite
|
||||
|
||||
The package you received contains the following packaging:
|
||||
|
||||
|
||||
Opening the white cardboard box, you can see the LicheePi3A board and basic accessories (silicone grease sheet+cooling fan+USB-C cable):
|
||||
|
||||
|
||||
If you find missing relevant components after opening the box, please contact customer service for consultation.
|
||||
|
||||
|
||||
### Accessories
|
||||
|
||||
LicheePi 4A also has a wide range of accessories to choose from, as shown in the following figure:
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Purchase instructions:
|
||||
|
||||
@@ -51,8 +51,8 @@ By default, LM3A SOM is already installed on the motherboard. If you need to upg
|
||||
<td colspan=2>First, use your fingers to flick the shrapnel outwards to unlock SOM, and then remove SOM</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td><img src="./assets/unbox/unlock_som.jpg" alt="unlock_som"></td>
|
||||
<td><img src="./assets/unbox/remove_som.jpg" alt="remove_som"></td>
|
||||
<td><img src="../../../../zh/lichee/K1/lpi3a/assets/unbox/unlock_som.jpg" alt="unlock_som"></td>
|
||||
<td><img src="../../../../zh/lichee/K1/lpi3a/assets/unbox/remove_som.jpg" alt="remove_som"></td>
|
||||
</tr>
|
||||
</table>
|
||||
|
||||
@@ -62,8 +62,8 @@ By default, LM3A SOM is already installed on the motherboard. If you need to upg
|
||||
<td colspan=2>First insert the SOM diagonally into the connector slot, then press the SOM, and the two side tabs will automatically lock the SOM</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td><img src="./assets/unbox/remove_som.jpg" alt="insert_som"></td>
|
||||
<td><img src="./assets/unbox/lock_som.jpg" alt="lock_som"></td>
|
||||
<td><img src="../../../../zh/lichee/K1/lpi3a/assets/unbox/remove_som.jpg" alt="insert_som"></td>
|
||||
<td><img src="../../../../zh/lichee/K1/lpi3a/assets/unbox/lock_som.jpg" alt="lock_som"></td>
|
||||
</tr>
|
||||
</table>
|
||||
|
||||
@@ -74,13 +74,13 @@ LicheePi 3A is a high-performance SBC that requires the installation of an activ
|
||||
1. Install thermal conductive silicone grease sheet
|
||||
Remove the thermal conductive silicone grease sheet, tear off both sides of the film, place the silicone grease sheet in the position shown in the figure and gently press it to fix it (the silicone grease sheet has a certain degree of viscosity to fix it), paying attention to fully covering the main chip and two memory chips
|
||||
|
||||
|
||||
|
||||
|
||||
2. Install the cooling fan
|
||||
|
||||
Align and install a 30mm cooling fan on the silicone grease sheet, and gently press and secure it in place.
|
||||
|
||||
|
||||
|
||||
|
||||
3. Install the cooling fan power supply
|
||||
4.
|
||||
@@ -98,7 +98,7 @@ By default, the WIFI antenna is already installed on the motherboard. If it is r
|
||||
|
||||
The assembled state is as follows:
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## Startup board
|
||||
@@ -106,7 +106,7 @@ The LicheePi 3A has pre burned the basic system image upon release, allowing you
|
||||
|
||||
Connect the monitor (self provided) to the HDMI port of the LicheePi 3A using an HDMI cable (self provided), and connect the matching USB-C cable to a USB power supply with at least 5V2A output (self provided). The LicheePi 3A will start up and the default image will boot up to the login interface of the desktop system within 30 seconds. The first login will enter the user account settings sequence.
|
||||
|
||||
|
||||
|
||||
|
||||
The default account password configuration for the image is as follows:
|
||||
|
||||
@@ -133,7 +133,7 @@ The POE module requires manual welding and installation by the user. Please weld
|
||||
|
||||
After completing the initial lighting of the board, you can take a moment to familiarize yourself with the hardware of LicheePi 3A, which will facilitate possible maintenance work in the future.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -11,7 +11,7 @@ update:
|
||||
|
||||
## Get Images
|
||||
### Bianbu
|
||||
|
||||
|
||||
LicheePi3A has been supported by the official bianbu image of Spacemit
|
||||
You can go to the official mirror site of Spacemit https://archive.spacemit.com/image/k1/version/bianbu/ ）Download, please note to download images v1.0.11 or higher
|
||||
|
||||
@@ -48,9 +48,9 @@ https://bianbu.spacemit.com/installation_and_upgrade
|
||||
## Burn eMMC
|
||||
### Use Titan Flasher to flash the device
|
||||
When the board detects that the BOOT key is pressed during startup, it can enter the burning mode. That is to say, first press and hold the BOOT key, then plug it in or short press the RESET key to enter the burning mode.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
### Use Fastboot to flash the device
|
||||
The zip firmware ending in. zip can be used to flash the device with fastboot after decompression.
|
||||
|
||||
|
Before Width: | Height: | Size: 12 KiB |
|
Before Width: | Height: | Size: 212 KiB |
|
Before Width: | Height: | Size: 95 KiB |
|
Before Width: | Height: | Size: 113 KiB |
|
Before Width: | Height: | Size: 170 KiB |
|
Before Width: | Height: | Size: 147 KiB |
|
Before Width: | Height: | Size: 166 KiB |
|
Before Width: | Height: | Size: 30 KiB |
|
Before Width: | Height: | Size: 96 KiB |
|
Before Width: | Height: | Size: 47 KiB |
|
Before Width: | Height: | Size: 97 KiB |
|
Before Width: | Height: | Size: 471 KiB |
|
Before Width: | Height: | Size: 53 KiB |
|
Before Width: | Height: | Size: 137 KiB |
|
Before Width: | Height: | Size: 75 KiB |
|
Before Width: | Height: | Size: 94 KiB |
|
Before Width: | Height: | Size: 93 KiB |
|
Before Width: | Height: | Size: 82 KiB |
|
Before Width: | Height: | Size: 102 KiB |
|
Before Width: | Height: | Size: 167 KiB |
|
Before Width: | Height: | Size: 87 KiB |
|
Before Width: | Height: | Size: 99 KiB |
|
Before Width: | Height: | Size: 84 KiB |
|
Before Width: | Height: | Size: 90 KiB |
|
Before Width: | Height: | Size: 103 KiB |
@@ -3,15 +3,15 @@
|
||||
|
||||
Lichee Nano是基于全志科技的F1C100s(ARM 926EJS内核)高性能soC芯片设计的迷你开发板。开发板设计小巧精致，将芯片的所有资源都引出，板载USB、Flash、TF卡、4OP LCD接口等，并把所有IO资源引出，方便开发者拓展使用，非常适合初学者学习linux或者商用于产品开发。
|
||||
|
||||
<img src="./../assets/Nano/Nano_2.png" width=400>
|
||||
<img src="./../assets/Nano/Nano_3.jpg" width=400>
|
||||
<img src="../../../zh/lichee/assets/Nano/Nano_2.png" width=400>
|
||||
<img src="../../../zh/lichee/assets/Nano/Nano_3.jpg" width=400>
|
||||
|
||||
## 参数
|
||||
|
||||
### F1C100s参数
|
||||
Lichee Nano开发板板载的F1C100s芯片功能很强大，芯片内置32MBDDR，拥有SDIO、SPI、UART、Speaker、Mic等接口，支持外挂 8~32MB SPI Nor Flash;在视频处理方面表现出现，支持720P视频输出，支持H.264、MJPEG等高清格式的解码。
|
||||
|
||||
|
||||
|
||||
|
||||
| 项目 | 参数 |
|
||||
| --- | ---- |
|
||||
|
||||
@@ -2,14 +2,14 @@
|
||||
|
||||
## Lichee Zero
|
||||
<div align="center">
|
||||
<a href="./Zero/Zero.html" ><img src="./assets/Zero/Zero_1.jpg" width=400></a>
|
||||
<a href="./Zero/Zero.html" ><img src="../../zh/lichee/assets/Zero/Zero_1.jpg" width=400></a>
|
||||
</div>
|
||||
|
||||
## Lichee Nano
|
||||
|
||||
<div align="center">
|
||||
|
||||
<a href="./Nano/Nano.html" ><img src="./assets/Nano/Nano_2.png" width=400></a>
|
||||
<a href="./Nano/Nano.html" ><img src="../../zh/lichee/assets/Nano/Nano_2.png" width=400></a>
|
||||
|
||||
</div>
|
||||
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
Lichee RV-86 Panel is a development kit designed for smart home central control scene. It's equipped with LicheeRV Core board (Allwinner D1 chip with 512MB ddr3), 4-inch touch IPS screen, Wifi+BT module, Ethernet, two digital silicon mic and GPIO expansion interface. For software it can use Linux OS (OpenWrt or Debian) and Ali WAFT (WAFT is a high-performance application research framework for AIoT based on WebAssembly and their own rendering engine)
|
||||
|
||||
|
||||
|
||||
|
||||
## Parameters
|
||||
| Item | Value |
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
|
||||
Lichee RV Dock is a RISC-V Linux development kit with high integration, small size and **affordable price** designed for open-source developers. It's equipped with **HDMI interface** and it supports many screen by its screen convert board. It's also equipped with many peripherals, including a USB-A port, **2.4G Wifi-BT module**, an analog microphone and a speaker jack interface. These means user can use it to develop or test linux application just by display device and input device like mouse and keyboard, which shortens developer's research and development time.
|
||||
|
||||
|
||||
|
||||
|
||||
## Parameters
|
||||
|
||||
|
||||
@@ -5,9 +5,9 @@
|
||||
## Overview
|
||||
Lichee RV - Nezha CM is a compute module with modular design, equipped with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM. It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin connectors to route all IO, making it convenient for wide use and easy to replace.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## Specifications
|
||||
|
||||
@@ -51,11 +51,11 @@ Lichee RV - Nezha CM is a compute module with modular design, equipped with Allw
|
||||
|
||||
## Connect 1.14 inch screen
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
> Up to now 1.14 inch screen is not able to display and need to wait for updating
|
||||
|
||||
@@ -81,9 +81,9 @@ If you want to use USB C to C data line, you need do two things：
|
||||
|
||||
> ① add two 5.1K 1% 0402 Resistances at R30 and R31 ，② Remove Diode
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## Download
|
||||
|
||||
@@ -7,7 +7,7 @@ keywords: riscv, licheerv,nano
|
||||
|
||||
The LicheeRV Nano is a mini-sized development board (measuring only 22.86*35.56mm), equipped with the SG2002 processor. It features a powerful core running at 1GHz (RISC-V/ARM options available) and a smaller core at 700MHz RISC-V, along with 256MB DDR3 memory, and an integrated 1Tops NPU. The board includes a wealth of interfaces such as MIPI-CSI, MIPI-DSI, SDIO, ETH, USB, SPI, UART, I2C, etc., allowing for the expansion of a wide variety of applications. Its through-hole/half-hole design facilitates easy mass production and soldering.
|
||||
|
||||
|
||||
|
||||
|
||||
## Specifications
|
||||
|
||||
@@ -30,7 +30,7 @@ The LicheeRV Nano is a mini-sized development board (measuring only 22.86*35.56m
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## Version Comparison
|
||||
|
||||
|
||||
@@ -11,36 +11,36 @@ The LicheeRV Nano is available in four versions based on networking capabilities
|
||||
- **Ethernet Version (E)**: Features an onboard 100M Ethernet port for wired network connections.
|
||||
- **WiFi Version (W)**: Equipped with an onboard WiFi6/BT5.2 module. By default, the BT5.2 functionality is not enabled. To activate Bluetooth capabilities, it's necessary to solder four 0201 resistors in the specified location or use a 2B pencil to create a short circuit in the designated area.
|
||||
|
||||
|
||||
|
||||
|
||||
+ The WiFi Ethernet (WE) version features an onboard WiFi 6/BT 5.2 module and comes with an Ethernet module that connects to the development board via standoffs and ribbon cables.
|
||||
|
||||
We also offer the following accessory:
|
||||
|
||||
- Camera
|
||||
- Camera
|
||||
|
||||
+ The camera (model 3754) features non-short-circuiting screw holes on both sides for secure mounting. It is recommended to fix the standoffs to the fifth pad for optimal stability.
|
||||
|
||||
|
||||
|
||||
|
||||
+ 3-inch Display Screen
|
||||
|
||||
|
||||
|
||||
|
||||
- The display features a resolution of 480*845 and supports touch functionality. The package includes a touch screen adapter board and a ribbon cable for easy integration.
|
||||
- 5-inch Display Screen
|
||||
|
||||
|
||||
|
||||
|
||||
- This display boasts a resolution of 480*845 and does not support touch functionality. The ribbon cable can be directly connected to the LicheeRV Nano 31Pin screen interface for seamless integration.
|
||||
- 7-inch Display Screen
|
||||
|
||||
|
||||
|
||||
|
||||
- The display features a resolution of 800*1280 and supports touch functionality. The ribbon cable can be directly connected to both the LicheeRV Nano 31Pin screen interface and the 6Pin touch interface, ensuring easy setup and integration.
|
||||
- 10-inch Display Screen
|
||||
|
||||
|
||||
|
||||
|
||||
------
|
||||
|
||||
@@ -60,57 +60,57 @@ The LicheeRV Nano is available in four versions based on networking capabilities
|
||||
|
||||
1. Solder the ribbon cable following the direction shown in the diagram below.
|
||||
|
||||
|
||||
|
||||
|
||||
2. Use a Multimeter to Test for Continuity
|
||||
|
||||
|
||||
|
||||
|
||||
●Securing the Standoffs
|
||||
|
||||
1. To avoid burns while soldering the standoffs, you can first screw them onto the Ethernet module.
|
||||
|
||||
|
||||
|
||||
|
||||
2. Insert the standoff into the fifth pad. It is advisable to apply solder paste to the pad beforehand to enhance the stability of the standoff after soldering.
|
||||
|
||||
|
||||
|
||||
|
||||
3. Use a soldering iron from the bottom side to solder.
|
||||
|
||||
|
||||
|
||||
|
||||
+ Assembly
|
||||
|
||||
1. Insert the ribbon cable into the FPC connector of the Ethernet module and secure it.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Secure the Ethernet module to the standoffs using screws.
|
||||
|
||||
|
||||
|
||||
|
||||
### Installing the Camera
|
||||
|
||||
- Securing the Standoffs
|
||||
1. Similar to the method mentioned above: first, screw the standoffs and screws onto the camera module.
|
||||
|
||||
|
||||
|
||||
|
||||
2. Insert the standoff into the fifth pad. To enhance the stability of the standoff after soldering, it is recommended to apply solder paste to the pad beforehand.
|
||||
|
||||
|
||||
|
||||
|
||||
3. Solder from the bottom side using a soldering iron.
|
||||
|
||||
|
||||
|
||||
|
||||
+ Assembly
|
||||
|
||||
1. Connect the camera ribbon cable as shown in the diagram below.
|
||||
|
||||
|
||||
|
||||
|
||||
2. Secure with screws.
|
||||
|
||||
|
||||
|
||||
@@ -6,7 +6,7 @@ Lichee Zero是基于全志科技的V3s(ARM Cortex-A7内核)高性能CPL芯片设
|
||||
核心板：
|
||||
|
||||
|
||||
<img src="./../assets/Zero/Zero_1.jpg" width=500>
|
||||
<img src="../../../zh/lichee/assets/Zero/Zero_1.jpg" width=500>
|
||||
|
||||
<img src="./../assets/Zero/Zero_6.jpg" width=500>
|
||||
|
||||
@@ -23,7 +23,7 @@ Lichee Zero是基于全志科技的V3s(ARM Cortex-A7内核)高性能CPL芯片设
|
||||
|
||||
V3s框架
|
||||
|
||||
|
||||
|
||||
|
||||
| 项目 | 参数 |
|
||||
| --- | --- |
|
||||
@@ -47,7 +47,7 @@ V3s框架
|
||||
| 其他接口 | <br>PWM x2<br>LRADC x1<br>Speakerx2+ Mic x1 |
|
||||
| 电气特性 | Micro USB 5V供电<br>2.54mm插针3.3V~5V供电<br>1.27mm邮票孔供电 |
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
### Lichee Zero 拓展板
|
||||
@@ -66,7 +66,7 @@ V3s框架
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## 使用教程
|
||||
|
||||
|
||||
@@ -10,7 +10,7 @@ Lichee Zero Plus是基于全志科技的S3 (ARM Cortex-A7内核)的高性能CPU
|
||||
## 参数
|
||||
### 芯片
|
||||
S3芯片架构
|
||||
|
||||
|
||||
|
||||
| 项目 | 参数 |
|
||||
| --- | --- |
|
||||
|
||||
|
Before Width: | Height: | Size: 167 KiB |
|
Before Width: | Height: | Size: 175 KiB |
|
Before Width: | Height: | Size: 429 KiB |
|
Before Width: | Height: | Size: 68 KiB |
|
Before Width: | Height: | Size: 131 KiB |
|
Before Width: | Height: | Size: 355 KiB |
|
Before Width: | Height: | Size: 211 KiB |
|
Before Width: | Height: | Size: 100 KiB |
|
Before Width: | Height: | Size: 98 KiB |
|
Before Width: | Height: | Size: 139 KiB |
|
Before Width: | Height: | Size: 164 KiB |
|
Before Width: | Height: | Size: 358 KiB |
|
Before Width: | Height: | Size: 133 KiB |
|
Before Width: | Height: | Size: 143 KiB |
|
Before Width: | Height: | Size: 96 KiB |
|
Before Width: | Height: | Size: 303 KiB |
|
Before Width: | Height: | Size: 310 KiB |
|
Before Width: | Height: | Size: 333 KiB |
|
Before Width: | Height: | Size: 52 KiB |
|
Before Width: | Height: | Size: 6.8 KiB |
|
Before Width: | Height: | Size: 4.4 KiB |
|
Before Width: | Height: | Size: 6.0 KiB |
|
Before Width: | Height: | Size: 5.0 KiB |
|
Before Width: | Height: | Size: 65 KiB |
|
Before Width: | Height: | Size: 167 KiB |
|
Before Width: | Height: | Size: 284 KiB |
|
Before Width: | Height: | Size: 162 KiB |
|
Before Width: | Height: | Size: 36 KiB |
|
Before Width: | Height: | Size: 222 KiB |
|
Before Width: | Height: | Size: 146 KiB |
|
Before Width: | Height: | Size: 11 KiB |
|
Before Width: | Height: | Size: 270 KiB |
|
Before Width: | Height: | Size: 107 KiB |
|
Before Width: | Height: | Size: 186 KiB |
|
Before Width: | Height: | Size: 306 KiB |
|
Before Width: | Height: | Size: 205 KiB |
|
Before Width: | Height: | Size: 176 KiB |
|
Before Width: | Height: | Size: 198 KiB |
|
Before Width: | Height: | Size: 54 KiB |
|
Before Width: | Height: | Size: 135 KiB |
|
Before Width: | Height: | Size: 180 KiB |
|
Before Width: | Height: | Size: 78 KiB |
|
Before Width: | Height: | Size: 55 KiB |
|
Before Width: | Height: | Size: 58 KiB |
|
Before Width: | Height: | Size: 468 KiB |
|
Before Width: | Height: | Size: 282 KiB |
|
Before Width: | Height: | Size: 97 KiB |
@@ -29,11 +29,11 @@ https://mega.nz/folder/p9BCTbLb#sWSZvLw6nrBmqujQXfvWrg
|
||||
|
||||
2. Locate the BOOT button and the RST button.
|
||||
|
||||
|
||||
|
||||
|
||||
3. Press and hold the BOOT button, then press the power button on the keyboard to turn on the device (or press the reset button if the device is already on). Connect the Book to the PC via the Type-C port for flashing the image.
|
||||
|
||||
|
||||
|
||||
|
||||
4. Download the flashing image on the PC.
|
||||
|
||||
|
||||
|
Before Width: | Height: | Size: 61 KiB |
|
Before Width: | Height: | Size: 55 KiB |
|
Before Width: | Height: | Size: 45 KiB |
|
Before Width: | Height: | Size: 53 KiB |
|
Before Width: | Height: | Size: 230 KiB |
|
Before Width: | Height: | Size: 340 KiB |
|
Before Width: | Height: | Size: 262 KiB |
|
Before Width: | Height: | Size: 256 KiB |
|
Before Width: | Height: | Size: 211 KiB |
|
Before Width: | Height: | Size: 217 KiB |
|
Before Width: | Height: | Size: 437 KiB |
|
Before Width: | Height: | Size: 109 KiB |
@@ -20,7 +20,7 @@ Thanks to the modular SOM design, Lichee Book 4A can also be upgraded to LM3A or
|
||||
> Note: High-performance RISC-V consumer electronics are still in the early stages as of 2024. Lichee Book 4A is mainly aimed at RISC-V developers with at least proficient Linux operating experience, and ordinary consumers may not be able to use it directly.
|
||||
> If you are an ordinary user without Linux experience, please do not purchase
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## Technical Specifications
|
||||
@@ -101,28 +101,28 @@ Thanks to the modular SOM design, Lichee Book 4A can also be upgraded to LM3A or
|
||||
|
||||
### Unbox
|
||||
Upon receiving the package:
|
||||
|
||||
|
||||
|
||||
Open the box, and take out the two parts, the notebook on the top, and the 12V2.5A power adapter and MiniHDMI cable at the bottom.
|
||||
|
||||
|
||||
|
||||
|
||||
Take out the main unit, the top view is as shown:
|
||||
|
||||
|
||||
|
||||
The bottom view shows an SSD cover, you can unscrew it to install an SSD; the central part is the fan intake, the unit uses a heat pipe + silent fan for cooling to ensure a cool core temperature.
|
||||
|
||||
|
||||
|
||||
One side view shows the interfaces from left to right: TF card, 3.5mm headphone jack, USB2.0 interface, and computer lock.
|
||||
|
||||
|
||||
|
||||
The other side view shows the interfaces from left to right: USB3.0 port, 12V DC port, miniHDMI port, USB-C port (for download/Host/charging).
|
||||
|
||||
|
||||
|
||||
|
||||
(If you purchased a barebones package, refer to the "SOM Installation Guide" section to install the LM4A before proceeding.)
|
||||
Open the main unit, press and hold the power button on the top right for 3 seconds to turn it on (release when the screen backlight lights up or the left power indicator lights up).
|
||||
|
||||
|
||||
|
||||
|
||||
If the backlight does not light up, the battery might be drained during transportation. Try plugging in the power adapter and holding the power button.
|
||||
@@ -138,7 +138,7 @@ Refer to the relevant sections of the LicheePi4A documentation for general softw
|
||||
|
||||
### SSDUsage Guide
|
||||
The Book supports M.2 2280 SATA SSDs, which can be installed by removing the SSD cover on the back.
|
||||
|
||||
|
||||
|
||||
如果你不计划使用SSD，可以手工关闭USB转SSD芯片来降低功耗（约0.6Watt），提升续航：
|
||||
|
||||
@@ -171,7 +171,7 @@ Then restart to turn off the SATA power.
|
||||
### SOM Installation Guide
|
||||
If you purchased the barebones package, you need to install the SOM module.
|
||||
Prepare a Phillips screwdriver, remove the back cover (first peel off the two foot pads, each has a screw underneath), install the SOM module, apply thermal grease on the CPU/DDR, place the heatgrease, and reassemble the back cover.
|
||||
|
||||
|
||||
|
||||
|
||||
## System
|
||||
|
||||
|
Before Width: | Height: | Size: 252 KiB |