docs(nanokvm-go): convert static documentation images to WebP

Convert 38 PNG and JPG assets to WebP and update their references in the Chinese and English documentation.

  Updated pages:
  - Introduction
  - FRP
  - Static IP
  - Tailscale
  - System flashing
  - System updating

  Replace the introduction device photo with the new NanoKVM Go usage image. Keep the existing animated GIF files
  unchanged.

  Reduce the converted image assets from approximately 3.44 MB to 1.03 MB while preserving their original dimensions.

docs/hardware/en/kvm/NanoKVM_Go/introduction.md

@@ -11,7 +11,7 @@ update:
 
 ## Introduction
 
-![NanoKVM Go appearance](./../../../assets/NanoKVM/go/introduction/nanokvm-go-device.jpg)
+![NanoKVM Go appearance](./../../../assets/NanoKVM/go/introduction/nanokvm-go-device.webp)
 
 NanoKVM Go is a portable IP-KVM tool in the NanoKVM series, designed for mobile maintenance, temporary access, and remote operation scenarios. It connects to the controlled device through USB-C and lets you view the screen, control keyboard and mouse input, and perform remote access from a browser.
 

docs/hardware/en/kvm/NanoKVM_Go/network/frp.md

@@ -346,11 +346,11 @@ The NanoKVM Go web interface does not provide an FRP entry, so you need to enabl
 
 1. Open the NanoKVM Go settings page;
 
-![NanoKVM Go settings entry](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_settings_entry.png)
+![NanoKVM Go settings entry](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_settings_entry.webp)
 
 2. Go to the settings item that contains the SSH switch, and enable SSH;
 
-![NanoKVM Go SSH switch](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_ssh_switch.png)
+![NanoKVM Go SSH switch](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_ssh_switch.webp)
 
 ### Log in through SSH
 
@@ -477,7 +477,7 @@ https://203.0.113.10:8080
 
 Replace the example IP address with the actual IP address of your public server. On first access, the browser may report that the certificate is not trusted. After confirming that you are accessing your own server, continue for testing. If the NanoKVM Go login page opens, the TCP forwarding configuration is correct. After testing, return to the SSH terminal and press `Ctrl+C` to stop `frpc`.
 
-![frpc connects to frps successfully](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_frpc_success_log.png)
+![frpc connects to frps successfully](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_frpc_success_log.webp)
 
 ### Enable frpc on boot
 

docs/hardware/en/kvm/NanoKVM_Go/network/static_ip.md

@@ -157,25 +157,25 @@ Common subnet mask and CIDR mappings:
 1. Log in to the NanoKVM Go web interface through the current IP address;
 2. Click `Settings` in the top toolbar;
 
-![Open the NanoKVM Go settings page](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_toolbar_settings.png)
+![Open the NanoKVM Go settings page](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_toolbar_settings.webp)
 
 3. Select `Device` on the settings page, then open `Advanced Settings`.
 
-![Open the device advanced settings](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_device_advanced_settings.png)
+![Open the device advanced settings](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_device_advanced_settings.webp)
 
 ### Enable and Fill In the Static IP
 
 1. Find `Static IP` in `Advanced Settings`;
 
-![Find the static IP setting entry](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_setting_button.png)
+![Find the static IP setting entry](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_setting_button.webp)
 
 2. Enable `Static IP`;
 
-![Enable static IP](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_enable_switch.png)
+![Enable static IP](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_enable_switch.webp)
 
 3. Fill in the static IP configuration in the `IP/CIDR [Gateway]` format;
 
-![Fill in the static IP using IP, CIDR, and optional gateway](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_input_format.png)
+![Fill in the static IP using IP, CIDR, and optional gateway](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_input_format.webp)
 
 4. Check the IP address, CIDR, and gateway, then click `Confirm`.
 

docs/hardware/en/kvm/NanoKVM_Go/network/tailscale.md

@@ -41,13 +41,13 @@ NanoKVM Go and the computer or phone used for remote access must join the same T
 1. Visit the [Tailscale website](https://tailscale.com/);
 2. Click `Get started` or `Log in`;
 
-![Registration and login entry on the Tailscale website](../../../../assets/NanoKVM/go/network/tailscale_homepage_get_started.png)
+![Registration and login entry on the Tailscale website](../../../../assets/NanoKVM/go/network/tailscale_homepage_get_started.webp)
 
 3. Sign in using one of the supported account providers;
 4. Follow the prompts to complete the initial authorization;
 5. Open the Tailscale admin console and select the `Machines` device list.
 
-![Machines device list in the Tailscale admin console](../../../../assets/NanoKVM/go/network/tailscale_admin_machines.png)
+![Machines device list in the Tailscale admin console](../../../../assets/NanoKVM/go/network/tailscale_admin_machines.webp)
 
 The `Machines` page is used to view and manage devices in the current Tailnet. After completing the following configuration, both NanoKVM Go and the client device will appear on this page.
 
@@ -59,45 +59,45 @@ The `Machines` page is used to view and manage devices in the current Tailnet. A
 
 Log in to the NanoKVM Go web interface and click the settings icon in the top toolbar.
 
-![Open the NanoKVM Go settings page](../../../../assets/NanoKVM/go/network/nanokvm_go_settings_button.png)
+![Open the NanoKVM Go settings page](../../../../assets/NanoKVM/go/network/nanokvm_go_settings_button.webp)
 
 ### Install or Start Tailscale
 
 Select `Tailscale` in the sidebar. If the page indicates that Tailscale is not running, click `Start` and wait for the service to start.
 
-![Start Tailscale on NanoKVM Go](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_start.png)
+![Start Tailscale on NanoKVM Go](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_start.webp)
 
 ### Log In to Tailscale
 
 1. After Tailscale starts, click `Log in`. The page generates a temporary authentication link and opens the Tailscale login page in the browser.
 
-![Click the Tailscale login button on NanoKVM Go](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_login.png)
+![Click the Tailscale login button on NanoKVM Go](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_login.webp)
 
 2. Select the same account or sign-in method used earlier and complete authentication.
 
-![Select a Tailscale login method](../../../../assets/NanoKVM/go/network/tailscale_login_methods.png)
+![Select a Tailscale login method](../../../../assets/NanoKVM/go/network/tailscale_login_methods.webp)
 
 3. Confirm that the device information is correct, then click `Connect` to add NanoKVM Go to the current Tailnet.
 
-![Confirm connecting NanoKVM Go to the Tailnet](../../../../assets/NanoKVM/go/network/tailscale_connect_device.png)
+![Confirm connecting NanoKVM Go to the Tailnet](../../../../assets/NanoKVM/go/network/tailscale_connect_device.webp)
 
 4. When the page displays `Login successful`, the Tailscale account authorization is complete.
 
-![Tailscale login successful](../../../../assets/NanoKVM/go/network/tailscale_login_success.png)
+![Tailscale login successful](../../../../assets/NanoKVM/go/network/tailscale_login_success.webp)
 
 5. Return to the NanoKVM Go web interface and click `Login complete`.
 
-![Confirm the completed login on NanoKVM Go](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_confirm_login.png)
+![Confirm the completed login on NanoKVM Go](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_confirm_login.webp)
 
 6. When the device name, device address, and account are displayed, NanoKVM Go has successfully joined the Tailnet.
 
-![Tailscale device address and account information on NanoKVM Go](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_device_info.png)
+![Tailscale device address and account information on NanoKVM Go](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_device_info.webp)
 
 ### Confirm That NanoKVM Go Is Online
 
 Open the `Machines` page in the Tailscale admin console and locate NanoKVM Go. A `Connected` status indicates that the device is online.
 
-![Confirm that NanoKVM Go is online in the Tailscale admin console](../../../../assets/NanoKVM/go/network/tailscale_admin_nanokvm_connected.png)
+![Confirm that NanoKVM Go is online in the Tailscale admin console](../../../../assets/NanoKVM/go/network/tailscale_admin_nanokvm_connected.webp)
 
 ## Install and Log In to Tailscale on the Client Device
 
@@ -128,19 +128,19 @@ After NanoKVM Go joins the Tailnet, it receives a Tailscale IP address in the `1
 
 Open `Settings` > `Tailscale` on NanoKVM Go and find the Tailscale IP in the `Device Address` field.
 
-![Find the Tailscale IP in NanoKVM Go settings](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_ip.png)
+![Find the Tailscale IP in NanoKVM Go settings](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_ip.webp)
 
 ### Find the Address in the Tailscale Admin Console
 
 Open the `Machines` page in the Tailscale admin console and find the Tailscale IP in the `ADDRESSES` column for NanoKVM Go.
 
-![Find the NanoKVM Go Tailscale IP in the Tailscale admin console](../../../../assets/NanoKVM/go/network/tailscale_admin_nanokvm_ip.png)
+![Find the NanoKVM Go Tailscale IP in the Tailscale admin console](../../../../assets/NanoKVM/go/network/tailscale_admin_nanokvm_ip.webp)
 
 ## Access NanoKVM Go Remotely
 
 Before connecting, confirm that both NanoKVM Go and the client device show `Connected` on the `Machines` page.
 
-![Confirm that the client device and NanoKVM Go are connected to Tailscale](../../../../assets/NanoKVM/go/network/tailscale_admin_devices_connected.png)
+![Confirm that the client device and NanoKVM Go are connected to Tailscale](../../../../assets/NanoKVM/go/network/tailscale_admin_devices_connected.webp)
 
 To ensure that the test uses an external network, disconnect the client device from the current LAN and use a phone hotspot or mobile network instead. Then follow these steps:
 

docs/hardware/en/kvm/NanoKVM_Go/system/flashing.md

@@ -32,7 +32,7 @@ Image download link: TODO
 
 Download and install [ImageUSB](https://www.osforensics.com/tools/write-usb-images.html).
 
-![ImageUSB download page](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_imageusb_download.png)
+![ImageUSB download page](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_imageusb_download.webp)
 
 ## Enter Flashing Mode
 
@@ -40,15 +40,15 @@ Download and install [ImageUSB](https://www.osforensics.com/tools/write-usb-imag
 
 2. Use the SIM eject pin to press and hold the Reset button on NanoKVM Go.
 
-![Press and hold the NanoKVM Go Reset button with a SIM eject pin](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_press_reset.jpg)
+![Press and hold the NanoKVM Go Reset button with a SIM eject pin](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_press_reset.webp)
 
 3. Keep holding the Reset button, connect the USB data cable to the NanoKVM Go data port, and connect the other end to the computer.
 
-![Hold Reset and connect the NanoKVM Go data port](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_connect_data_port.jpg)
+![Hold Reset and connect the NanoKVM Go data port](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_connect_data_port.webp)
 
 4. Open ImageUSB and wait until it detects the USB device for NanoKVM Go.
 
-![NanoKVM Go device detected in ImageUSB](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_device_detected.png)
+![NanoKVM Go device detected in ImageUSB](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_device_detected.webp)
 
 5. Release the Reset button after the device is detected.
 
@@ -56,31 +56,31 @@ Download and install [ImageUSB](https://www.osforensics.com/tools/write-usb-imag
 
 1. In ImageUSB, select the USB device corresponding to NanoKVM Go.
 
-![Select NanoKVM Go in ImageUSB](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_select_device.png)
+![Select NanoKVM Go in ImageUSB](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_select_device.webp)
 
 2. Select the mode for writing an image.
 
-![Select write image mode in ImageUSB](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_write_mode.png)
+![Select write image mode in ImageUSB](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_write_mode.webp)
 
 3. Select the downloaded NanoKVM Go image file.
 
-![Select the NanoKVM Go image in ImageUSB](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_select_image.png)
+![Select the NanoKVM Go image in ImageUSB](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_select_image.webp)
 
 4. Click the write button to start flashing.
 
-![Click the ImageUSB write button](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_start_write.png)
+![Click the ImageUSB write button](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_start_write.webp)
 
 5. Confirm the write operation when prompted.
 
-![Confirm the ImageUSB write operation](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_confirm_write.png)
+![Confirm the ImageUSB write operation](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_confirm_write.webp)
 
 6. Wait for flashing to complete.
 
-![ImageUSB writing the image](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_write_progress.png)
+![ImageUSB writing the image](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_write_progress.webp)
 
 7. Flashing succeeded.
 
-![ImageUSB flashing complete](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_complete.png)
+![ImageUSB flashing complete](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_complete.webp)
 
 After flashing is complete, safely eject the USB device, disconnect the USB cable, reconnect NanoKVM Go, and wait for the system to boot.
 

docs/hardware/en/kvm/NanoKVM_Go/system/updating.md

@@ -32,23 +32,23 @@ Before updating, confirm the following:
 
 On the top menu bar of the control page, click `Settings` to open the settings page.
 
-![NanoKVM Go Settings button](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_settings_button.png)
+![NanoKVM Go Settings button](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_settings_button.webp)
 
 ## Check for Updates
 
 On the settings page, click `Check for updates`.
 
-![NanoKVM Go check for updates page](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_check_update.png)
+![NanoKVM Go check for updates page](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_check_update.webp)
 
 If an update is available, a confirmation dialog is displayed. Click `OK` to start the update.
 
-![Confirm the NanoKVM Go application update](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_confirm_update.png)
+![Confirm the NanoKVM Go application update](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_confirm_update.webp)
 
 ## Wait for the Update to Complete
 
 After clicking OK, keep NanoKVM Go powered on and connected to the network, then wait for the application update to complete.
 
-![NanoKVM Go application update progress](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_progress.png)
+![NanoKVM Go application update progress](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_progress.webp)
 
 Do not power off the device during the update, and do not refresh or close the page. After the update is complete, follow the instructions on the page. If the page refreshes automatically or returns to the login page, log in again.
 

docs/hardware/zh/kvm/NanoKVM_Go/introduction.md

@@ -11,7 +11,7 @@ update:
 
 ## 简介
 
-![NanoKVM Go 外观](./../../../assets/NanoKVM/go/introduction/nanokvm-go-device.jpg)
+![NanoKVM Go 外观](./../../../assets/NanoKVM/go/introduction/nanokvm-go-device.webp)
 
 NanoKVM Go 是 NanoKVM 系列中的便携式 IP-KVM 工具，面向随身维护、临时接入和远程运维场景。它通过 USB-C 接入被控设备，将画面查看、键鼠控制和远程访问集中到浏览器中完成。
 

docs/hardware/zh/kvm/NanoKVM_Go/network/frp.md

@@ -346,11 +346,11 @@ NanoKVM Go 网页端没有 FRP 入口，因此需要先开启 SSH，再通过命
 
 1. 打开 NanoKVM Go 的设置页面；
 
-![NanoKVM Go 设置页面入口](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_settings_entry.png)
+![NanoKVM Go 设置页面入口](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_settings_entry.webp)
 
 2. 进入包含 SSH 开关的设置项；开启 SSH 服务；
 
-![NanoKVM Go SSH 开关页面](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_ssh_switch.png)
+![NanoKVM Go SSH 开关页面](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_ssh_switch.webp)
 
 ### 通过 SSH 登录
 
@@ -477,7 +477,7 @@ https://203.0.113.10:8080
 
 将示例 IP 替换为公网服务器的实际 IP。首次访问时，浏览器可能提示证书不受信任；确认访问的是自己的服务器后，可以继续访问测试。如果可以打开 NanoKVM Go 登录页面，说明 TCP 转发配置正确。完成测试后，返回 SSH 终端并按 `Ctrl+C` 停止 frpc。
 
-![frpc 成功连接 frps](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_frpc_success_log.png)
+![frpc 成功连接 frps](../../../../assets/NanoKVM/go/network/nanokvm_go_frp_frpc_success_log.webp)
 
 
 ### 设置 frpc 开机自启

docs/hardware/zh/kvm/NanoKVM_Go/network/static_ip.md

@@ -157,26 +157,26 @@ CIDR 中斜杠后的数字，表示子网掩码从左到右连续的二进制 `1
 1. 使用 NanoKVM Go 当前的 IP 地址登录网页控制端；
 2. 点击顶部工具栏中的 `设置`；
 
-![打开 NanoKVM Go 设置页面](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_toolbar_settings.png)
+![打开 NanoKVM Go 设置页面](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_toolbar_settings.webp)
 
 3. 在设置页面中选择 `设备`，然后打开 `高级设置`。
 
-![进入设备的高级设置](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_device_advanced_settings.png)
+![进入设备的高级设置](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_device_advanced_settings.webp)
 
 
 ### 启用并填写静态 IP
 
 1. 在 `高级设置` 中找到 `静态 IP`；
 
-![找到静态 IP 设置入口](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_setting_button.png)
+![找到静态 IP 设置入口](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_setting_button.webp)
 
 2. 启用 `静态 IP`；
 
-![启用静态 IP](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_enable_switch.png)
+![启用静态 IP](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_enable_switch.webp)
 
 3. 按照 `IP/CIDR [Gateway]` 格式填写静态 IP 配置；
 
-![按照 IP、CIDR 和可选网关格式填写静态 IP](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_input_format.png)
+![按照 IP、CIDR 和可选网关格式填写静态 IP](../../../../assets/NanoKVM/go/network/nanokvm_go_static_ip_input_format.webp)
 
 4. 检查 IP、CIDR 和网关无误后，点击 `确定`。
 

docs/hardware/zh/kvm/NanoKVM_Go/network/tailscale.md

@@ -42,13 +42,13 @@ NanoKVM Go 和用于远程访问的电脑或手机需要加入同一个 Tailscal
 2. 点击 `Get started` 或 `Log in`；
 
 
-![Tailscale 官网注册和登录入口](../../../../assets/NanoKVM/go/network/tailscale_homepage_get_started.png)
+![Tailscale 官网注册和登录入口](../../../../assets/NanoKVM/go/network/tailscale_homepage_get_started.webp)
 
 3. 使用页面支持的账号完成登录；
 4. 按照页面提示完成首次授权；
 5. 进入 Tailscale 管理后台，打开 `Machines` 设备列表。
 
-![Tailscale 管理后台的 Machines 设备列表](../../../../assets/NanoKVM/go/network/tailscale_admin_machines.png)
+![Tailscale 管理后台的 Machines 设备列表](../../../../assets/NanoKVM/go/network/tailscale_admin_machines.webp)
 
 `Machines` 页面用于查看和管理已经加入当前 Tailnet 的设备。完成后续配置后，NanoKVM Go 和访问端都会出现在该页面中。
 
@@ -60,45 +60,45 @@ NanoKVM Go 和用于远程访问的电脑或手机需要加入同一个 Tailscal
 
 登录 NanoKVM Go 网页控制端，点击顶部工具栏中的设置图标。
 
-![打开 NanoKVM Go 设置页面](../../../../assets/NanoKVM/go/network/nanokvm_go_settings_button.png)
+![打开 NanoKVM Go 设置页面](../../../../assets/NanoKVM/go/network/nanokvm_go_settings_button.webp)
 
 ### 安装或启动 Tailscale
 
 在设置页面左侧选择 `Tailscale`。如果页面提示 Tailscale 尚未运行，请点击 `启动`，等待服务启动完成。
 
-![在 NanoKVM Go 中启动 Tailscale](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_start.png)
+![在 NanoKVM Go 中启动 Tailscale](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_start.webp)
 
 ### 登录 Tailscale
 
 1. Tailscale 启动后，点击 `登录`。页面会生成一个临时认证链接，并在浏览器中打开 Tailscale 登录页面。
 
-![点击 NanoKVM Go 的 Tailscale 登录按钮](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_login.png)
+![点击 NanoKVM Go 的 Tailscale 登录按钮](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_login.webp)
 
 2. 选择与前文相同的账号或登录方式，完成身份验证。
 
-![选择 Tailscale 登录方式](../../../../assets/NanoKVM/go/network/tailscale_login_methods.png)
+![选择 Tailscale 登录方式](../../../../assets/NanoKVM/go/network/tailscale_login_methods.webp)
 
 3. 确认页面显示的设备信息无误，然后点击 `Connect`，将 NanoKVM Go 加入当前 Tailnet。
 
-![确认将 NanoKVM Go 连接到 Tailnet](../../../../assets/NanoKVM/go/network/tailscale_connect_device.png)
+![确认将 NanoKVM Go 连接到 Tailnet](../../../../assets/NanoKVM/go/network/tailscale_connect_device.webp)
 
 4. 页面显示 `Login successful` 后，表示 Tailscale 账号授权成功。
 
-![Tailscale 登录成功](../../../../assets/NanoKVM/go/network/tailscale_login_success.png)
+![Tailscale 登录成功](../../../../assets/NanoKVM/go/network/tailscale_login_success.webp)
 
 5. 返回 NanoKVM Go 网页控制端，点击 `登录完成`。
 
-![在 NanoKVM Go 页面确认登录完成](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_confirm_login.png)
+![在 NanoKVM Go 页面确认登录完成](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_confirm_login.webp)
 
 6. 页面显示设备名称、设备地址和账号后，表示 NanoKVM Go 已成功加入 Tailnet。
 
-![NanoKVM Go 的 Tailscale 设备地址和账号信息](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_device_info.png)
+![NanoKVM Go 的 Tailscale 设备地址和账号信息](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_device_info.webp)
 
 ### 确认 NanoKVM Go 已上线
 
 打开 Tailscale 管理后台的 `Machines` 页面，找到 NanoKVM Go。设备状态显示为 `Connected` 时，表示设备已经上线。
 
-![在 Tailscale 管理后台确认 NanoKVM Go 已上线](../../../../assets/NanoKVM/go/network/tailscale_admin_nanokvm_connected.png)
+![在 Tailscale 管理后台确认 NanoKVM Go 已上线](../../../../assets/NanoKVM/go/network/tailscale_admin_nanokvm_connected.webp)
 
 ## 在访问端安装并登录 Tailscale
 
@@ -129,20 +129,20 @@ NanoKVM Go 加入 Tailnet 后，会获得一个 `100.x.x.x` 格式的 Tailscale
 
 打开 NanoKVM Go 的 `设置` > `Tailscale`，在 `设备地址` 一栏中查看 Tailscale IP。
 
-![在 NanoKVM Go 设置中查看 Tailscale IP](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_ip.png)
+![在 NanoKVM Go 设置中查看 Tailscale IP](../../../../assets/NanoKVM/go/network/nanokvm_go_tailscale_ip.webp)
 
 ### 在 Tailscale 管理后台中查看
 
 打开 Tailscale 管理后台的 `Machines` 页面，在 NanoKVM Go 对应行的 `ADDRESSES` 一栏中查看 Tailscale IP。
 
-![在 Tailscale 管理后台中查看 NanoKVM Go 的 Tailscale IP](../../../../assets/NanoKVM/go/network/tailscale_admin_nanokvm_ip.png)
+![在 Tailscale 管理后台中查看 NanoKVM Go 的 Tailscale IP](../../../../assets/NanoKVM/go/network/tailscale_admin_nanokvm_ip.webp)
 
 
 ## 从外网访问 NanoKVM Go
 
 开始访问前，请先确认 NanoKVM Go 和访问端在 `Machines` 页面中均显示为 `Connected`。
 
-![确认访问端和 NanoKVM Go 均已连接到 Tailscale](../../../../assets/NanoKVM/go/network/tailscale_admin_devices_connected.png)
+![确认访问端和 NanoKVM Go 均已连接到 Tailscale](../../../../assets/NanoKVM/go/network/tailscale_admin_devices_connected.webp)
 
 为确保测试使用的是外网连接，建议断开访问端当前的局域网，改用手机热点或移动网络。然后按照以下步骤访问：
 

docs/hardware/zh/kvm/NanoKVM_Go/system/flashing.md

@@ -33,7 +33,7 @@ update:
 
 下载并安装 [ImageUSB](https://www.osforensics.com/tools/write-usb-images.html)。
 
-![ImageUSB 下载页面](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_imageusb_download.png)
+![ImageUSB 下载页面](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_imageusb_download.webp)
 
 ## 进入烧录模式
 
@@ -41,15 +41,15 @@ update:
 
 2. 使用取卡针按住 NanoKVM Go 的 Reset 按键；
 
-![使用取卡针按住 NanoKVM Go Reset 按键](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_press_reset.jpg)
+![使用取卡针按住 NanoKVM Go Reset 按键](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_press_reset.webp)
 
 3. 保持按住 Reset 按键，将 USB 数据线插入 NanoKVM Go 的数据接口(Data Port)，并连接到电脑；
 
-![按住 Reset 按键并连接 NanoKVM Go 数据接口](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_connect_data_port.jpg)
+![按住 Reset 按键并连接 NanoKVM Go 数据接口](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_connect_data_port.webp)
 
 4. 打开 ImageUSB，等待软件识别到 NanoKVM Go 对应的 USB 设备;
 
-![ImageUSB 识别到 NanoKVM Go 设备](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_device_detected.png)
+![ImageUSB 识别到 NanoKVM Go 设备](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_device_detected.webp)
 
 5. 识别成功后，松开 Reset 按键。
 
@@ -59,31 +59,31 @@ update:
 
 1. 在 ImageUSB 中选择 NanoKVM Go 对应的 USB 设备；
 
-![在 ImageUSB 中选择 NanoKVM Go 设备](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_select_device.png)
+![在 ImageUSB 中选择 NanoKVM Go 设备](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_select_device.webp)
 
 2. 选择写入镜像的模式；
 
-![在 ImageUSB 中选择写入镜像模式](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_write_mode.png)
+![在 ImageUSB 中选择写入镜像模式](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_write_mode.webp)
 
 3. 选择下载好的 NanoKVM Go 镜像文件；
 
-![在 ImageUSB 中选择 NanoKVM Go 镜像文件](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_select_image.png)
+![在 ImageUSB 中选择 NanoKVM Go 镜像文件](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_select_image.webp)
 
 4. 点击写入按钮开始烧录；
 
-![点击 ImageUSB 写入按钮](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_start_write.png)
+![点击 ImageUSB 写入按钮](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_start_write.webp)
 
 5. 根据软件提示确认写入操作；
 
-![确认 ImageUSB 写入操作](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_confirm_write.png)
+![确认 ImageUSB 写入操作](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_confirm_write.webp)
 
 6. 等待烧录完成。
 
-![ImageUSB 正在写入镜像](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_write_progress.png)
+![ImageUSB 正在写入镜像](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_write_progress.webp)
 
 7. 烧录成功。
 
-![ImageUSB 烧录完成](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_complete.png)
+![ImageUSB 烧录完成](../../../../assets/NanoKVM/go/system/nanokvm_go_flashing_complete.webp)
 
 烧录完成后，安全弹出 USB 设备，断开 USB 数据线，然后重新连接 NanoKVM Go，等待系统启动。
 

docs/hardware/zh/kvm/NanoKVM_Go/system/updating.md

@@ -33,23 +33,23 @@ NanoKVM Go 支持在网页控制端中更新应用。更新前请确保设备已
 
 在控制页面顶部菜单栏中，点击 `设置` 按钮，进入设置页面。
 
-![NanoKVM Go 设置按钮](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_settings_button.png)
+![NanoKVM Go 设置按钮](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_settings_button.webp)
 
 ## 检查更新
 
 进入设置页面后，点击 `检查更新`。
 
-![NanoKVM Go 检查更新页面](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_check_update.png)
+![NanoKVM Go 检查更新页面](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_check_update.webp)
 
 如果检测到可用更新，页面会弹出确认提示。点击 `确定` 开始更新。
 
-![确认更新 NanoKVM Go 应用](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_confirm_update.png)
+![确认更新 NanoKVM Go 应用](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_confirm_update.webp)
 
 ## 等待更新完成
 
 点击确定后，保持 NanoKVM Go 通电并保持网络连接，等待应用更新完成。
 
-![NanoKVM Go 应用更新进度](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_progress.png)
+![NanoKVM Go 应用更新进度](../../../../assets/NanoKVM/go/system/nanokvm_go_updating_progress.webp)
 
 更新过程中请勿断电，也不要刷新或关闭页面。更新完成后，按照页面提示继续操作；如果页面自动刷新或重新进入登录页面，重新登录即可。