Administrator/NANOKVM-LicheeRV-Nano-Build-MIRROR
1
0
Fork 1
mirror of https://github.com/sipeed/LicheeRV-Nano-Build.git synced 2026-09-10 20:59:59 -05:00
Code Issues Packages Projects Releases Wiki Activity

20240322

Browse Source
This commit is contained in:
Lu
2024-03-22 15:42:49 +08:00
parent a5cee7efae
commit a04c837678
43 changed files with 770 additions and 460 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
README.md
View File

@@ -5,9 +5,11 @@
```
git clone https://github.com/LicheeRV-Nano-Build --depth=1
cd LicheeRV-Nano-Build
wget https://sophon-file.sophon.cn/sophon-prod-s3/drive/23/03/07/16/host-tools.tar.gz
tar xf host-tools.tar.gz
git clone https://github.com/sophgo/host-tools --depth=1
source build/cvisetup.sh
# C906:
defconfig sg2002_licheervnano_sd
# A53:
# defconfig sg2002_licheea53nano_sd
build_all
```

3
build/boards/sg200x/sg2002_licheearmnano_sd/config.json → build/boards/sg200x/sg2002_licheea53nano_sd/config.json
View File

@@ -1,9 +1,8 @@
{
"ddr_cfg_list": [
"",
"ddr3_1866_x16",
"ddr3_2133_x16",
"ddr_auto_x16"
],
"board_information": "CA53 + DDR 256MB"
"board_information": "CA53"
}

53
build/boards/sg200x/sg2002_licheearmnano_sd/dts_arm/sg2002_licheearmnano_sd.dts → build/boards/sg200x/sg2002_licheea53nano_sd/dts_arm/sg2002_licheea53nano_sd.dts
View File

@@ -146,32 +146,31 @@
};
};
wifisd:wifi-sd@4320000 {
compatible = "cvitek,cv181x-sdio";
bus-width = <4>;
reg = <0x0 0x4320000 0x0 0x1000>;
reg_names = "core_mem";
src-frequency = <375000000>;
min-frequency = <400000>; // 400Khz
//max-frequency = <50000000>; // 50Mhz
//max-frequency = <45000000>; // 45Mhz
//max-frequency = <40000000>; // 40Mhz
//max-frequency = <35000000>; // 35Mhz
//max-frequency = <30000000>; // 30Mhz
max-frequency = <25000000>; // 25Mhz
//max-frequency = <20000000>; // 20Mhz
//max-frequency = <15000000>; // 15Mhz
//max-frequency = <10000000>; // 10Mhz
//max-frequency = <5000000>; // 5Mhz
64_addressing;
reset_tx_rx_phy;
non-removable;
pll_index = <0x7>;
pll_reg = <0x300207C>;
no-mmc;
no-sd;
status = "okay";
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&plic0>;
wifisd:wifi-sd@4320000 {
compatible = "cvitek,cv181x-sdio";
bus-width = <4>;
reg = <0x0 0x4320000 0x0 0x1000>;
reg_names = "core_mem";
src-frequency = <375000000>;
min-frequency = <400000>; // 400Khz
//max-frequency = <50000000>; // 50Mhz
//max-frequency = <45000000>; // 45Mhz
//max-frequency = <40000000>; // 40Mhz
//max-frequency = <35000000>; // 35Mhz
//max-frequency = <30000000>; // 30Mhz
max-frequency = <25000000>; // 25Mhz
//max-frequency = <20000000>; // 20Mhz
//max-frequency = <15000000>; // 15Mhz
//max-frequency = <10000000>; // 10Mhz
//max-frequency = <5000000>; // 5Mhz
64_addressing;
reset_tx_rx_phy;
non-removable;
pll_index = <0x7>;
pll_reg = <0x300207C>;
no-mmc;
no-sd;
status = "okay";
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
};
};

388
build/boards/sg200x/sg2002_licheearmnano_sd/linux/sg2002_licheearmnano_sd_defconfig → build/boards/sg200x/sg2002_licheea53nano_sd/linux/sg2002_licheea53nano_sd_defconfig
View File

@@ -1,5 +1,23 @@
CONFIG_KERNEL_XZ=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_UID16 is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_ARM_LPAE=y
CONFIG_SWP_EMULATE=y
# CONFIG_VDSO is not set
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_ARM_PSCI=y
CONFIG_THUMB2_KERNEL=y
@@ -7,59 +25,50 @@ CONFIG_FORCE_MAX_ZONEORDER=10
# CONFIG_ATAGS is not set
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_BLK_DEV_INITRD=n
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_FORCE_MAX_ZONEORDER=10
# CONFIG_SUSPEND is not set
CONFIG_ARCH_CVITEK=y
CONFIG_SOC_THEAD=y
# CONFIG_COMPAT is not set
CONFIG_ARCH_CV181X=y
CONFIG_ARCH_CVITEK_CHIP="mars"
CONFIG_ARCH_CV181X_ASIC=y
CONFIG_POWER_RESET=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_STRICT_KERNEL_RWX=n
# CONFIG_STACKPROTECTOR is not set
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_ELF_CORE=y
CONFIG_COREDUMP=y
CONFIG_PROC_SYSCTL=y
# CONFIG_COREDUMP is not set
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=m
CONFIG_RFKILL=y
CONFIG_UEVENT_HELPER=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_DMA_CMA=n
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_CVSNFC=y
CONFIG_MTD_SPI_NOR=y
CONFIG_SPI_CVI_SPIF=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_NETDEVICES=y
@@ -72,11 +81,15 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
@@ -89,6 +102,7 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
CONFIG_STMMAC_ETH=y
# CONFIG_DWMAC_GENERIC is not set
@@ -107,17 +121,12 @@ CONFIG_CVITEK_PHY=y
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
# CONFIG_RTL8188FU is not set
CONFIG_RTL8188FU=m
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
@@ -128,11 +137,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=5
CONFIG_SERIAL_8250_DW=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PINCTRL=y
CONFIG_CVITEK_PINCTRL_CV1835=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
@@ -142,227 +151,11 @@ CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_EMULATION=y
CONFIG_WATCHDOG=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
CONFIG_MEDIA_SUPPORT=n
CONFIG_VIDEO_CVITEK=m
CONFIG_VIDEO_CVITEK_CIF=m
CONFIG_VIDEO_CVITEK_SNS_I2C=m
CONFIG_VIDEO_CVITEK_MIPI_TX=m
#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
# end of Media SPI Adapters
#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA18250 is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not set
# CONFIG_MEDIA_TUNER_TDA9887 is not set
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MSI001 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2063 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_XC4000 is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
# CONFIG_MEDIA_TUNER_MC44S803 is not set
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
# CONFIG_MEDIA_TUNER_FC0013 is not set
# CONFIG_MEDIA_TUNER_TDA18212 is not set
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
# CONFIG_MEDIA_TUNER_SI2157 is not set
# CONFIG_MEDIA_TUNER_IT913X is not set
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
# CONFIG_DVB_STV090x is not set
# CONFIG_DVB_STV0910 is not set
# CONFIG_DVB_STV6110x is not set
# CONFIG_DVB_STV6111 is not set
# CONFIG_DVB_MXL5XX is not set
# CONFIG_DVB_M88DS3103 is not set
#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
# CONFIG_DVB_TDA18271C2DD is not set
# CONFIG_DVB_SI2165 is not set
# CONFIG_DVB_MN88472 is not set
# CONFIG_DVB_MN88473 is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_ZL10036 is not set
# CONFIG_DVB_ZL10039 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_STV6110 is not set
# CONFIG_DVB_STV0900 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_CX24117 is not set
# CONFIG_DVB_CX24120 is not set
# CONFIG_DVB_SI21XX is not set
# CONFIG_DVB_TS2020 is not set
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set
# CONFIG_DVB_TDA10071 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_S5H1432 is not set
# CONFIG_DVB_DRXD is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
# CONFIG_DVB_DIB9000 is not set
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_AF9013 is not set
# CONFIG_DVB_EC100 is not set
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set
# CONFIG_DVB_CXD2841ER is not set
# CONFIG_DVB_RTL2830 is not set
# CONFIG_DVB_RTL2832 is not set
# CONFIG_DVB_RTL2832_SDR is not set
# CONFIG_DVB_SI2168 is not set
# CONFIG_DVB_ZD1301_DEMOD is not set
# CONFIG_DVB_CXD2880 is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_LGDT3306A is not set
# CONFIG_DVB_LG2160 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522_DTV is not set
# CONFIG_DVB_AU8522_V4L is not set
# CONFIG_DVB_S5H1411 is not set
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
# CONFIG_DVB_DIB8000 is not set
# CONFIG_DVB_MB86A20S is not set
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_TC90522 is not set
# CONFIG_DVB_MN88443X is not set
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_DRX39XYJ is not set
# CONFIG_DVB_LNBH25 is not set
# CONFIG_DVB_LNBH29 is not set
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_LNBP22 is not set
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_ISL6423 is not set
# CONFIG_DVB_A8293 is not set
# CONFIG_DVB_LGS8GL5 is not set
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_ATBM8830 is not set
# CONFIG_DVB_TDA665x is not set
# CONFIG_DVB_IX2505V is not set
# CONFIG_DVB_M88RS2000 is not set
# CONFIG_DVB_AF9033 is not set
# CONFIG_DVB_HORUS3A is not set
# CONFIG_DVB_ASCOT2E is not set
# CONFIG_DVB_HELENE is not set
#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
# CONFIG_DVB_SP2 is not set
# end of Customise DVB Frontends
#
# Digital TV options
#
# CONFIG_DVB_NET is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
# end of Digital TV options
CONFIG_FB=y
CONFIG_FB_CVITEK=m
CONFIG_SOUND=y
@@ -370,7 +163,8 @@ CONFIG_SND=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_PROC_FS is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_HDA_PREALLOC_SIZE=1
CONFIG_SND_HDA_PREALLOC_SIZE=n
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
@@ -379,24 +173,18 @@ CONFIG_SND_SOC_CV182XA_CV182XADAC=y
CONFIG_SND_CV1835_I2S=y
CONFIG_SND_SOC_CV182XAADC=y
CONFIG_SND_SOC_CV182XADAC=y
# CONFIG_SND_SOC_CV182X_CV182XPDM is not set
# CONFIG_SND_SOC_CV1835PDM is not set
# CONFIG_SND_SOC_CV1835_CONCURRENT_I2S is not set
CONFIG_SND_SOC_CV1835_USE_AUDIO_PLL=y
CONFIG_CV1835_I2S_SUBSYS=y
CONFIG_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_GADGET=y
CONFIG_WATCHDOG_CORE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_CVI=y
CONFIG_BLK_CMDLINE_PARSER=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_EFI_PARTITION=n
CONFIG_DYNAMIC_DEBUG=y
CONFIG_EXT4_FS=y
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC_CVITEK=y
CONFIG_RTC_CLASS=y
CONFIG_DMADEVICES=n
CONFIG_DW_DMAC_CVITEK=n
# CONFIG_VIRTIO_MENU is not set
CONFIG_STAGING=y
CONFIG_ION=y
@@ -404,23 +192,28 @@ CONFIG_ION_SYSTEM_HEAP=y
CONFIG_ION_CARVEOUT_HEAP=y
CONFIG_ION_CMA_HEAP=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_CV1835_SYSDMA_REMAP=y
CONFIG_CV1835_SYSDMA_REMAP=n
CONFIG_PWM=y
CONFIG_SIFIVE_PLIC=y
CONFIG_ANDROID=y
# CONFIG_TEE=y
# CONFIG_OPTEE=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_CONFIGFS_FS=m
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_UBIFS_FS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_ZLIB is not set
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=1
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
@@ -430,6 +223,7 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_CRYPTO_ECHAINIV is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_XZ_DEC_X86 is not set
@@ -437,25 +231,26 @@ CONFIG_CRYPTO_SHA256=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=n
CONFIG_DEBUG_INFO_DWARF4=n
CONFIG_GDB_SCRIPTS=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_KALLSYMS=y
CONFIG_FRAME_POINTER=n
CONFIG_DEBUG_MISC=n
CONFIG_RCU_TRACE=n
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_USB_ROLE_SWITCH=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
CONFIG_RTC_CLASS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_USB=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_FSM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_U_SERIAL=y
@@ -466,32 +261,27 @@ CONFIG_USB_F_ECM=y
CONFIG_USB_F_EEM=y
CONFIG_USB_F_RNDIS=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_UAC1=y
# buggy driver, need fix
# CONFIG_USB_F_UVC is not set
CONFIG_USB_F_UVC=y
CONFIG_USB_UAS=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_DUAL_ROLE=y
CONFIG_USB_GADGET=y
CONFIG_U_SERIAL_CONSOLE=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
# CONFIG_USB_CONFIGFS_OBEX is not set
# CONFIG_USB_CONFIGFS_NCM is not set
CONFIG_USB_CONFIGFS_ECM=y
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_UEVENT=y
CONFIG_USB_CONFIGFS_F_UAC1=y
# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
# CONFIG_USB_CONFIGFS_F_UAC2 is not set
# CONFIG_USB_CONFIGFS_F_MIDI is not set
# CONFIG_USB_CONFIGFS_F_HID is not set
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_BUG=n
CONFIG_ADVISE_SYSCALLS=n
CONFIG_TIMERFD=n
CONFIG_USB_PHY=y
CONFIG_USB_GPIO_VBUS=y
# for licheervnano
CONFIG_FB_SIMPLE=y
@@ -544,6 +334,12 @@ CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_AIC_WLAN_SUPPORT=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_HYNITRON_TS=y
CONFIG_USB_DWC2=y
# these driver may broken codec driver
# CONFIG_FUSE_FS is not set

4
build/boards/sg200x/sg2002_licheearmnano_sd/memmap.py → build/boards/sg200x/sg2002_licheea53nano_sd/memmap.py Executable file → Normal file
View File

@@ -15,7 +15,7 @@ class MemoryMap:
# ==============
# C906L FreeRTOS
# ==============
FREERTOS_SIZE = 2 * SIZE_1M
FREERTOS_SIZE = 768 * SIZE_1K
# FreeRTOS is at the end of DRAM
FREERTOS_ADDR = DRAM_BASE + DRAM_SIZE - FREERTOS_SIZE
FSBL_C906L_START_ADDR = FREERTOS_ADDR
@@ -40,7 +40,7 @@ class MemoryMap:
# =================
# Multimedia buffer. Used by u-boot/kernel/FreeRTOS
# =================
ION_SIZE = 75 * SIZE_1M
ION_SIZE = 70 * SIZE_1M
H26X_BITSTREAM_SIZE = 2 * SIZE_1M
H26X_ENC_BUFF_SIZE = 0
ISP_MEM_BASE_SIZE = 20 * SIZE_1M

0
build/boards/sg200x/sg2002_licheearmnano_sd/partition/partition_sd.xml → build/boards/sg200x/sg2002_licheea53nano_sd/partition/partition_sd.xml
View File

18
build/boards/sg200x/sg2002_licheearmnano_sd/sg2002_licheearmnano_sd_defconfig → build/boards/sg200x/sg2002_licheea53nano_sd/sg2002_licheea53nano_sd_defconfig
View File

@@ -1,25 +1,23 @@
CONFIG_CHIP_sg2002=y
CONFIG_BOARD_licheearmnano_sd=y
CONFIG_BOARD_licheea53nano_sd=y
CONFIG_DDR_CFG_ddr3_1866_x16=y
CONFIG_ARCH="arm64"
CONFIG_CROSS_COMPILE="aarch64-linux-gnu-"
CONFIG_CROSS_COMPILE_KERNEL="aarch64-linux-gnu-"
CONFIG_ARCH="arm"
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KERNEL_ENTRY_HACK=y
CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
CONFIG_TOOLCHAIN_GLIBC_ARM64=y
CONFIG_FLASH_SIZE_SHRINK=y
CONFIG_BOOT_IMAGE_SINGLE_DTB=y
CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80108000"
CONFIG_TOOLCHAIN_GLIBC_ARM=y
# CONFIG_FLASH_SIZE_SHRINK is not set
CONFIG_CP_EXT_WIRELESS=y
CONFIG_BOOT_IMAGE_SINGLE_DTB=y
CONFIG_STORAGE_TYPE_sd=y
CONFIG_MIPI_PANEL_ZCT2133V1=y
CONFIG_SENSOR_GCORE_GC4653=y
CONFIG_UBOOT_2021_10=y
CONFIG_KERNEL_SRC_5.10=y
CONFIG_KERNEL_SRC="linux_5.10"
CONFIG_KERNEL_LZMA=y
CONFIG_SKIP_RAMDISK=y
CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
# CONFIG_ROOTFS_OVERLAYFS is not set
# CONFIG_ENABLE_FREERTOS is not set
# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
# CONFIG_TARGET_PACKAGE_GATORD is not set
CONFIG_ENABLE_FREERTOS=y

0
build/boards/sg200x/sg2002_licheearmnano_sd/u-boot/cvi_board_init.c → build/boards/sg200x/sg2002_licheea53nano_sd/u-boot/cvi_board_init.c
View File

13
build/boards/sg200x/sg2002_licheea53nano_sd/u-boot/cvitek.h Normal file
View File

@@ -0,0 +1,13 @@
/*
*VO control GPIOs
*/
#define VO_GPIO_RESET_PORT portb
#define VO_GPIO_RESET_INDEX 5
#define VO_GPIO_RESET_ACTIVE GPIO_ACTIVE_LOW
#define VO_GPIO_PWM_PORT portb
#define VO_GPIO_PWM_INDEX 4
#define VO_GPIO_PWM_ACTIVE GPIO_ACTIVE_HIGH
#define VO_GPIO_POWER_CT_PORT portb
#define VO_GPIO_POWER_CT_INDEX 3
#define VO_GPIO_POWER_CT_ACTIVE GPIO_ACTIVE_HIGH

11
build/boards/sg200x/sg2002_licheearmnano_sd/u-boot/sg2002_licheearmnano_sd_defconfig → build/boards/sg200x/sg2002_licheea53nano_sd/u-boot/sg2002_licheea53nano_sd_defconfig
View File

@@ -3,11 +3,15 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_DEVICE_TREE="soph_asic"
CONFIG_IDENT_STRING=" soph"
CONFIG_ARMV8_SET_SMPEN=y
CONFIG_TARGET_CVITEK_CV181X=y
#CONFIG_CVITEK_SPI_FLASH=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_PROMPT="soph# "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_XIMG is not set
@@ -23,7 +27,10 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_CVI_SD_UPDATE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_DM_MMC=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
@@ -38,6 +45,7 @@ CONFIG_SPI=y
CONFIG_LZ4=y
CONFIG_LZMA=y
# CONFIG_TOOLS_LIBCRYPTO is not set
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_ENV_IS_NOWHERE=y
# for licheervnano
@@ -61,6 +69,3 @@ CONFIG_BMP_32BPP=y
CONFIG_BOOTLOGO=y
CONFIG_CMD_CVI_VO=y
CONFIG_CMD_GPIO=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y

0
build/boards/sg200x/sg2002_licheearmnano_sd/u-boot/cvitek.h
View File

2
build/boards/sg200x/sg2002_licheervnano_sd/sg2002_licheervnano_sd_defconfig
View File

@@ -16,7 +16,7 @@ CONFIG_MIPI_PANEL_ZCT2133V1=y
CONFIG_SENSOR_GCORE_GC4653=y
CONFIG_UBOOT_2021_10=y
CONFIG_KERNEL_SRC_5.10=y
CONFIG_KERNEL_LZMA=y
CONFIG_KERNEL_UNCOMPRESSED=y
CONFIG_SKIP_RAMDISK=y
CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
# CONFIG_ROOTFS_OVERLAYFS is not set

8
build/boards/sg200x/sg2002_licheervnano_sd/u-boot/cvi_board_init.c
View File

@@ -73,7 +73,7 @@ int cvi_board_init(void)
val &= ~(1 << 26); // set level to low
mmio_write_32(0x03020000, val);
suck_loop(200);
suck_loop(50);
user_led_toggle();
val = mmio_read_32(0x03020000); // signal level
@@ -116,8 +116,8 @@ int cvi_board_init(void)
mmio_write_32(0x030010ac, 0x4); // PWRGPIO 2 PWM 10
// camera function
//mmio_write_32(0x0300116C, 0x5); // RX4N CAM_MCLK0 for inside preview board
mmio_write_32(0x0300118C, 0x5); // RX0N CAM_MCLK1
mmio_write_32(0x0300116C, 0x5); // RX4N CAM_MCLK0 for alpha
//mmio_write_32(0x0300118C, 0x5); // RX0N CAM_MCLK1 for beta
// camera/tp i2c
mmio_write_32(0x03001090, 0x5); // PWR_GPIO6 IIC4_SCL
@@ -130,7 +130,7 @@ int cvi_board_init(void)
mmio_write_32(0x0502707c, 0x11);// Unlock PWR_GPIO[4]
// wait hardware bootup
suck_loop(100);
suck_loop(50);
user_led_off();
return 0;
}

2
build/boards/sg200x/sg2002_licheervnano_sd/u-boot/sg2002_licheervnano_sd_defconfig
View File

@@ -9,7 +9,7 @@ CONFIG_TARGET_CVITEK_CV181X=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTDELAY=1
CONFIG_BOOTDELAY=0
CONFIG_SYS_PROMPT="soph# "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_XIMG is not set

1
build/tools/common/sd_tools/genimage_rootless.cfg
View File

@@ -6,7 +6,6 @@ image boot.vfat {
"rawimages/boot.sd",
"usb.dev",
"usb.rndis0",
"fb",
"wifi.sta",
}
}

1
build/tools/common/sd_tools/sd_gen_burn_image_rootless.sh
View File

@@ -27,7 +27,6 @@ cp -fv ${output_dir}/rawimages/boot.sd ${output_dir}/input/rawimages/
cp -fv ${output_dir}/rawimages/rootfs.sd ${output_dir}/input/
touch ${output_dir}/input/usb.dev
touch ${output_dir}/input/usb.rndis0
touch ${output_dir}/input/fb
touch ${output_dir}/input/wifi.sta
touch ${output_dir}/input/gt9xx
cp -fv ${THISDIR}/genimage_rootless.cfg ${output_dir}/genimage.cfg

0
buildroot/board/cvitek/SG200X/overlay/etc/init.d/S03usbdev → buildroot/board/cvitek/SG200X/overlay/etc/init.d/S00usbdev
View File

3
buildroot/board/cvitek/SG200X/overlay/etc/init.d/S00kmod → buildroot/board/cvitek/SG200X/overlay/etc/init.d/S01kmod
View File

@@ -29,9 +29,6 @@ then
insmod soph_pwm.ko
insmod soph_saradc.ko
insmod soph_wiegand.ko
insmod cfg80211.ko
insmod 3rd/aic8800_bsp.ko
insmod 3rd/aic8800_fdrv.ko
echo "OK"
exit 0
fi

0
buildroot/board/cvitek/SG200X/overlay/etc/init.d/S01fs → buildroot/board/cvitek/SG200X/overlay/etc/init.d/S02fs
View File

0
buildroot/board/cvitek/SG200X/overlay/etc/init.d/S02config → buildroot/board/cvitek/SG200X/overlay/etc/init.d/S03config
View File

13
buildroot/board/cvitek/SG200X/overlay/etc/init.d/S25wifimod Executable file
View File

@@ -0,0 +1,13 @@
#!/bin/sh
if [ "$1" = "start" ]
then
. /etc/profile
printf "load wifi kernel module: "
cd /mnt/system/ko/
insmod cfg80211.ko
insmod 3rd/aic8800_bsp.ko
insmod 3rd/aic8800_fdrv.ko
echo "OK"
exit 0
fi

2
buildroot/board/cvitek/SG200X/overlay/etc/init.d/S30wifi
View File

@@ -62,7 +62,7 @@ start() {
wpa_passphrase "$ssid" "$pass" >> /etc/wpa_supplicant.conf
fi
wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf
if [ -e /boot/wifi.dhcp ]
if [ ! -e /boot/wifi.nodhcp ]
then
(udhcpc -i wlan0 -t 10 -T 1 -A 5 -b -p /run/udhcpc.wlan0.pid) &
fi

39
buildroot/board/cvitek/SG200X/overlay/etc/init.d/S99ednctest Executable file
View File

@@ -0,0 +1,39 @@
#!/bin/sh
case "$1" in
start)
printf "Starting ednctest: "
if [ -e /boot/ednctest ]
then
touch /tmp/ednctest
fi
. /etc/profile
(
while true
do
if [ ! -e /tmp/ednctest ]
then
break
fi
if [ ! -e /tmp/rand.h264 ]
then
dd if=/dev/urandom of=/tmp/rand.yuv bs=1M count=2
/mnt/system/usr/bin/sample_venc -h 1080 -w 1080 -c 264 -i rand.yuv -o /tmp/rand
fi
/mnt/system/usr/bin/sample_vcodec sample_vdec -c 264 -i rand.h264 -o rand
done
) &
[ $? = 0 ] && echo "OK" || echo "FAIL"
;;
stop)
printf "Stopping ednctest: "
rm /tmp/ednctest
echo "OK"
;;
restart)
printf "Restart ednctest: "
$(realpath ${0}) stop
$(realpath ${0}) start
echo "OK"
;;
esac

35
buildroot/board/cvitek/SG200X/overlay/etc/init.d/S99modeltest Executable file
View File

@@ -0,0 +1,35 @@
#!/bin/sh
case "$1" in
start)
printf "Starting modeltest: "
if [ -e /boot/modeltest ]
then
touch /tmp/modeltest
fi
(
while true
do
if [ ! -e /tmp/modeltest ]
then
break
fi
cd /usr/bin/
nice -n 19 model_runner_test 10000
done
) &
[ $? = 0 ] && echo "OK" || echo "FAIL"
;;
stop)
printf "Stopping modeltest: "
rm /tmp/modeltest
killall model_runner
echo "OK"
;;
restart)
printf "Restart modeltest: "
$(realpath ${0}) stop
$(realpath ${0}) start
echo "OK"
;;
esac

4
buildroot/board/cvitek/SG200X/overlay/etc/ssh/sshd_config
View File

@@ -17,7 +17,9 @@
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
# generate rsa & ecdsa use a lot of time, so disable it
HostKey /etc/ssh/ssh_host_ed25519_key
# Ciphers and keying
#RekeyLimit default none

BIN
buildroot/board/cvitek/SG200X/overlay/mnt/cfg/param/cvi_sdr_bin Normal file
View File

Binary file not shown.

34
buildroot/board/cvitek/SG200X/overlay/mnt/data/sensor_cfg.ini Normal file
View File

@@ -0,0 +1,34 @@
[source]
;type = SOURCE_USER_FE
dev_num = 1
; section for sensor
[sensor]
; sensor name
name = GCORE_GC4653_MIPI_4M_30FPS_10BIT
bus_id = 4
sns_i2c_addr = 29
mipi_dev = 0
lane_id = 2, 1, 0, -1, -1
pn_swap = 0, 0, 0, 0, 0
mclk_en = 1
mclk = 0
;port = 0
;pin = 2
;pol = 1
;fps = 30

383
buildroot/configs/cvitek_SG200X_32bit_defconfig Normal file
View File

@@ -0,0 +1,383 @@
BR2_arm=y
BR2_cortex_a53=y
BR2_ARM_EABIHF=y
BR2_ARM_FPU_FP_ARMV8=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_ARM_ARM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y
BR2_OPTIMIZE_2=y
BR2_CCACHE=y
BR2_REPRODUCIBLE=y
BR2_PER_PACKAGE_DIRECTORIES=y
BR2_TARGET_GENERIC_HOSTNAME="licheea53nano"
BR2_TARGET_GENERIC_ISSUE="Welcome to Linux"
BR2_TARGET_GENERIC_ROOT_PASSWD="root"
BR2_PACKAGE_AIC8800_SDIO_FIRMWARE=y
BR2_INIT_SYSV=y
BR2_ROOTFS_MERGED_USR=y
BR2_ENABLE_LOCALE_WHITELIST="C en_US en_US.utf8"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_KMOD=y
# dont rename network card,
# BR2_PACKAGE_EUDEV_RULES_GEN is not set
BR2_PACKAGE_EUDEV_ENABLE_HWDB=y
BR2_PACKAGE_BLUEZ5_UTILS=y
BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
BR2_PACKAGE_BLUEZ5_UTILS_TOOLS=y
BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED=y
BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_HID=y
BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_NETWORK=y
BR2_PACKAGE_BLUEZ5_UTILS_TOOLS_HID2HCI=y
BR2_PACKAGE_BLUEZ5_UTILS_MONITOR=y
BR2_PACKAGE_BLUEZ_ALSA=y
BR2_PACKAGE_BLUEZ_ALSA_RFCOMM=y
BR2_PACKAGE_BLUEZ_ALSA_HCITOP=y
BR2_PACKAGE_NTP=y
BR2_PACKAGE_NTP_NTPD=y
BR2_PACKAGE_NTP_NTPDATE=y
BR2_PACKAGE_MACCHANGER=y
BR2_PACKAGE_AVAHI=y
BR2_PACKAGE_AVAHI_AUTOIPD=y
# avahi mdns is buggy
# BR2_PACKAGE_AVAHI_DAEMON is not set
# BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY is not set
# BR2_PACKAGE_AVAHI_DEFAULT_SERVICES is not set
BR2_PACKAGE_MDNSD=y
BR2_PACKAGE_MDNSD_MQUERY=y
BR2_PACKAGE_MDNSD_HTTP_SERVICE=y
BR2_PACKAGE_MDNSD_SSH_SERVICE=y
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WIRELESS_TOOLS_IFRENAME=y
BR2_PACKAGE_WIRELESS_TOOLS_IWCONFIG=y
BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
BR2_PACKAGE_AIRCRACK_NG=y
BR2_PACKAGE_UTIL_LINUX_RFKILL=y
BR2_PACKAGE_IPERF3=y
BR2_PACKAGE_ETHTOOL=y
BR2_PACKAGE_DNSMASQ=y
BR2_PACKAGE_DNSMASQ_DHCP=y
BR2_PACKAGE_RSYNC=y
BR2_PACKAGE_SOCAT=y
BR2_PACKAGE_TINC=y
BR2_PACKAGE_WIRELESS_REGDB=y
BR2_PACKAGE_MOSH=y
BR2_PACKAGE_LRZSZ=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_WIREGUARD_TOOLS=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
BR2_PACKAGE_WPA_SUPPLICANT_WPA3=y
BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
BR2_PACKAGE_WPA_SUPPLICANT_OVERRIDES=y
BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY=y
BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING=y
BR2_PACKAGE_WPA_SUPPLICANT_IBSS_RSN=y
BR2_PACKAGE_WPA_SUPPLICANT_WEXT=y
BR2_PACKAGE_WPA_SUPPLICANT_EAP=y
BR2_PACKAGE_WPA_SUPPLICANT_HOTSPOT=y
BR2_PACKAGE_WPA_SUPPLICANT_DEBUG_SYSLOG=y
BR2_PACKAGE_WPA_SUPPLICANT_WPS=y
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO=y
BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
BR2_PACKAGE_WPA_SUPPLICANT_CTRL_IFACE=y
BR2_PACKAGE_WPA_SUPPLICANT_DBUS=y
BR2_PACKAGE_HOSTAPD=y
BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP=y
BR2_PACKAGE_HOSTAPD_DRIVER_NL80211=y
BR2_PACKAGE_HOSTAPD_ACS=y
BR2_PACKAGE_HOSTAPD_EAP=y
BR2_PACKAGE_HOSTAPD_WPS=y
BR2_PACKAGE_HOSTAPD_WPA3=y
# BR2_PACKAGE_HOSTAPD_VLAN is not set
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_OPENSSH_CLIENT=y
BR2_PACKAGE_OPENSSH_SERVER=y
BR2_PACKAGE_OPENSSH_KEY_UTILS=y
BR2_PACKAGE_HAVEGED=y
BR2_PACKAGE_LIBOPENSSL_BIN=y
BR2_PACKAGE_LIBOPENSSL_ENGINES=y
BR2_PACKAGE_PARTED=y
BR2_PACKAGE_MEMTESTER=y
BR2_PACKAGE_CACHE_CALIBRATOR=y
BR2_PACKAGE_DHRYSTONE=y
BR2_PACKAGE_RAMSPEED=y
BR2_PACKAGE_SPIDEV_TEST=y
BR2_PACKAGE_STRESS_NG=y
BR2_PACKAGE_STRACE=y
BR2_PACKAGE_VMTOUCH=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_ALSA_UTILS_ALSACTL=y
BR2_PACKAGE_ALSA_UTILS_ALSAMIXER=y
BR2_PACKAGE_ALSA_UTILS_APLAY=y
BR2_PACKAGE_MPG123=y
BR2_PACKAGE_BZIP2=y
BR2_PACKAGE_LRZIP=y
BR2_PACKAGE_LZIP=y
BR2_PACKAGE_P7ZIP=y
BR2_PACKAGE_PIGZ=y
BR2_PACKAGE_PIXZ=y
BR2_PACKAGE_UNRAR=y
BR2_PACKAGE_UNZIP=y
BR2_PACKAGE_ZIP=y
BR2_PACKAGE_ZSTD=y
BR2_PACKAGE_LZOP=y
BR2_PACKAGE_BROTLI=y
BR2_PACKAGE_LIBZIP=y
BR2_PACKAGE_LZ4_PROGS=y
BR2_PACKAGE_SZIP=y
BR2_PACKAGE_CA_CERTIFICATES=y
BR2_PACKAGE_EVTEST=y
BR2_PACKAGE_FILE=y
BR2_PACKAGE_EMPTY=y
BR2_PACKAGE_E2FSPROGS=y
BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
BR2_PACKAGE_TMUX=y
BR2_PACKAGE_HTOP=y
BR2_PACKAGE_LIBCURL=y
BR2_PACKAGE_LIBCURL_CURL=y
BR2_PACKAGE_LIBCURL_VERBOSE=y
BR2_PACKAGE_LIBCURL_PROXY_SUPPORT=y
BR2_PACKAGE_LIBCURL_COOKIES_SUPPORT=y
BR2_PACKAGE_LIBCURL_WEBSOCKETS_SUPPORT=y
BR2_PACKAGE_LIBCURL_EXTRA_PROTOCOLS_FEATURES=y
BR2_PACKAGE_LIBCURL_OPENSSL=y
BR2_PACKAGE_LIBWEBSOCKETS=y
BR2_PACKAGE_WATCHDOG=y
BR2_PACKAGE_SQUASHFS=y
BR2_PACKAGE_SQUASHFS_GZIP=y
BR2_PACKAGE_SQUASHFS_LZ4=y
BR2_PACKAGE_SQUASHFS_LZMA=y
BR2_PACKAGE_SQUASHFS_LZO=y
BR2_PACKAGE_SQUASHFS_XZ=y
BR2_PACKAGE_SQUASHFS_ZSTD=y
BR2_PACKAGE_LCDTEST=y
BR2_PACKAGE_ASCII_INVADERS=y
BR2_PACKAGE_GNUCHESS=y
BR2_PACKAGE_SL=y
BR2_PACKAGE_XORCURSES=y
BR2_PACKAGE_INPUT_EVENT_DAEMON=y
BR2_PACKAGE_BLUEZ_TOOLS=y
BR2_PACKAGE_TPUDEMO_SG200X=y
BR2_PACKAGE_SG2002_CODEC_FIRMWARE=y
BR2_PACKAGE_TCPDUMP=y
BR2_PACKAGE_SSDP_RESPONDER=y
BR2_PACKAGE_PPPD=y
BR2_PACKAGE_NFTABLES=y
BR2_PACKAGE_IPTABLES=y
BR2_PACKAGE_IPTABLES_NFTABLES=y
BR2_PACKAGE_NCURSES_WCHAR=y
BR2_PACKAGE_LIBEDIT=y
BR2_PACKAGE_NGINX=y
BR2_PACKAGE_NGINX_HTTP=y
BR2_PACKAGE_NGINX_HTTP_DAV_MODULE=y
BR2_PACKAGE_NGINX_HTTP_MP4_MODULE=y
BR2_PACKAGE_NGINX_HTTP_FLV_MODULE=y
BR2_PACKAGE_NGINX_HTTP_GUNZIP_MODULE=y
BR2_PACKAGE_NGINX_STREAM=y
BR2_PACKAGE_NGINX_SELECT_MODULE=y
BR2_PACKAGE_NGINX_HTTP_FASTCGI_MODULE=y
BR2_PACKAGE_NGINX_HTTP_UWSGI_MODULE=y
BR2_PACKAGE_NGINX_HTTP_SCGI_MODULE=y
BR2_PACKAGE_RTC_TOOLS=y
BR2_PACKAGE_PICOCOM=y
BR2_PACKAGE_FBGRAB=y
BR2_PACKAGE_MHZ=y
BR2_PACKAGE_SETSERIAL=y
BR2_PACKAGE_UBOOT_TOOLS=y
BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT=y
BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE=y
BR2_PACKAGE_UBOOT_TOOLS_DUMPIMAGE=y
# if your sdnand is small, you can delete some package
BR2_PACKAGE_IMAGEMAGICK=y
BR2_PACKAGE_OCRAD=y
BR2_PACKAGE_SDL=y
BR2_PACKAGE_SDL_FBCON=y
BR2_PACKAGE_SDL_GFX=y
BR2_PACKAGE_SDL_IMAGE=y
BR2_PACKAGE_SDL_IMAGE_BMP=y
BR2_PACKAGE_SDL_IMAGE_GIF=y
BR2_PACKAGE_SDL_IMAGE_JPEG=y
BR2_PACKAGE_SDL_IMAGE_PNG=y
BR2_PACKAGE_SDL_IMAGE_WEBP=y
BR2_PACKAGE_SDL_MIXER=y
BR2_PACKAGE_SDL_NET=y
BR2_PACKAGE_SDL_SOUND=y
BR2_PACKAGE_SDL_SOUND_PLAYSOUND=y
BR2_PACKAGE_LBREAKOUT2=y
BR2_PACKAGE_LBREAKOUT2_AUDIO=y
BR2_PACKAGE_LBREAKOUT2_NET=y
BR2_PACKAGE_LTRIS=y
BR2_PACKAGE_LTRIS_AUDIO=y
BR2_PACKAGE_PRBOOM=y
BR2_PACKAGE_DOOM_WAD=y
BR2_PACKAGE_TCL=y
# BR2_PACKAGE_TCL_SHLIB_ONLY is not set
# BR2_PACKAGE_TCL_DEL_ENCODINGS is not set
BR2_PACKAGE_EXPECT=y
BR2_PACKAGE_TCLLIB=y
BR2_PACKAGE_OPENCV4=y
BR2_PACKAGE_OPENCV4_LIB_CALIB3D=y
BR2_PACKAGE_OPENCV4_LIB_DNN=y
BR2_PACKAGE_OPENCV4_LIB_HIGHGUI=y
BR2_PACKAGE_OPENCV4_LIB_OBJDETECT=y
BR2_PACKAGE_OPENCV4_LIB_PHOTO=y
BR2_PACKAGE_OPENCV4_LIB_SHAPE=y
BR2_PACKAGE_OPENCV4_LIB_STITCHING=y
BR2_PACKAGE_OPENCV4_LIB_SUPERRES=y
BR2_PACKAGE_OPENCV4_LIB_TS=y
BR2_PACKAGE_OPENCV4_LIB_VIDEOSTAB=y
BR2_PACKAGE_OPENCV4_BUILD_TESTS=y
BR2_PACKAGE_OPENCV4_BUILD_PERF_TESTS=y
BR2_PACKAGE_OPENCV4_WITH_FFMPEG=y
BR2_PACKAGE_OPENCV4_WITH_JPEG=y
BR2_PACKAGE_OPENCV4_WITH_PNG=y
BR2_PACKAGE_OPENCV4_WITH_TBB=y
BR2_PACKAGE_OPENCV4_WITH_TIFF=y
BR2_PACKAGE_OPENCV4_WITH_V4L=y
BR2_PACKAGE_OPENCV4_WITH_WEBP=y
BR2_PACKAGE_OPENCV4_INSTALL_DATA=y
BR2_PACKAGE_LIBQRENCODE=y
BR2_PACKAGE_LIBQRENCODE_TOOLS=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_FFMPEG=y
BR2_PACKAGE_FFMPEG_FFPROBE=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_NONFREE=y
BR2_PACKAGE_FFMPEG_POSTPROC=y
BR2_PACKAGE_MULTICAT=y
BR2_PACKAGE_WQY_ZENHEI=y
BR2_PACKAGE_DEJAVU=y
BR2_PACKAGE_GNUPLOT=y
BR2_PACKAGE_TESSERACT_OCR=y
BR2_PACKAGE_TESSERACT_OCR_LANG_ENG=y
BR2_PACKAGE_TESSERACT_OCR_LANG_CHI_SIM=y
BR2_PACKAGE_TESSERACT_OCR_LANG_CHI_TRA=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM=y
BR2_PACKAGE_QT5BASE_GUI=y
BR2_PACKAGE_QT5BASE_LINUXFB=y
BR2_PACKAGE_QT5BASE_WIDGETS=y
BR2_PACKAGE_QT5BASE_DEFAULT_QPA="linuxfb"
BR2_PACKAGE_QT5BASE_FONTCONFIG=y
BR2_PACKAGE_QT5BASE_GIF=y
BR2_PACKAGE_QT5BASE_PNG=y
BR2_PACKAGE_QT5BASE_JPEG=y
BR2_PACKAGE_QT5BASE_SYSLOG=y
BR2_PACKAGE_QT5BASE_DBUS=y
BR2_PACKAGE_QT5BASE_TSLIB=y
BR2_PACKAGE_QT5BASE_EXAMPLES=y
BR2_PACKAGE_QT5BASE_CONCURRENT=y
BR2_PACKAGE_QT5CONNECTIVITY=y
BR2_PACKAGE_QT5IMAGEFORMATS=y
BR2_PACKAGE_QT5MULTIMEDIA=y
BR2_PACKAGE_QT5SENSORS=y
BR2_PACKAGE_QT5SERIALBUS=y
BR2_PACKAGE_QT5CHARTS=y
BR2_PACKAGE_QT5COAP=y
BR2_PACKAGE_QT5ENGINIO=y
BR2_PACKAGE_QT5KNX=y
BR2_PACKAGE_QT5LOCATION=y
BR2_PACKAGE_QT5MQTT=y
BR2_PACKAGE_QT5OPCUA=y
BR2_PACKAGE_QT5REMOTEOBJECTS=y
BR2_PACKAGE_QT5SPEECH=y
BR2_PACKAGE_QT5SVG=y
BR2_PACKAGE_QT5WEBSOCKETS=y
BR2_PACKAGE_QT5WEBCHANNEL=y
BR2_PACKAGE_QEXTSERIALPORT=y
BR2_PACKAGE_QT5X11EXTRAS=y
BR2_PACKAGE_QT5XMLPATTERNS=y
BR2_PACKAGE_QT5BASE_MYSQL=y
BR2_PACKAGE_QJSON=y
BR2_PACKAGE_QUAZIP=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON3_2TO3=y
BR2_PACKAGE_PYTHON3_BZIP2=y
BR2_PACKAGE_PYTHON3_CODECSCJK=y
BR2_PACKAGE_PYTHON3_CURSES=y
BR2_PACKAGE_PYTHON3_SSL=y
BR2_PACKAGE_PYTHON3_UNICODEDATA=y
BR2_PACKAGE_PYTHON3_SQLITE=y
BR2_PACKAGE_PYTHON3_XZ=y
BR2_PACKAGE_PYTHON3_ZLIB=y
BR2_PACKAGE_PYTHON_NUMPY=y
BR2_PACKAGE_OPENCV4_LIB_PYTHON=y
BR2_PACKAGE_OPENCV4_WITH_QT5=y
BR2_PACKAGE_PYTHON_BSDIFF4=y
BR2_PACKAGE_PYTHON_BEAUTIFULSOUP4=y
BR2_PACKAGE_PYTHON_CFFI=y
BR2_PACKAGE_PYTHON_CRC16=y
BR2_PACKAGE_PYTHON_DBUS_FAST=y
BR2_PACKAGE_PYTHON_DATEUTIL=y
BR2_PACKAGE_PYTHON_DBUS_NEXT=y
BR2_PACKAGE_PYTHON_DJANGO=y
BR2_PACKAGE_PYTHON_FLASK=y
BR2_PACKAGE_PYTHON_EVDEV=y
BR2_PACKAGE_PYTHON_FLASK_BABEL=y
BR2_PACKAGE_PYTHON_FLASK_CORS=y
BR2_PACKAGE_PYTHON_FLASK_JSONRPC=y
BR2_PACKAGE_PYTHON_FLASK_LOGIN=y
BR2_PACKAGE_PYTHON_FLASK_SMOREST=y
BR2_PACKAGE_PYTHON_FLASK_SQLALCHEMY=y
BR2_PACKAGE_PYTHON_FLASK_WTF=y
BR2_PACKAGE_PYTHON_HWDATA=y
BR2_PACKAGE_PYTHON_PIP=y
BR2_PACKAGE_PYTHON_PEXPECT=y
BR2_PACKAGE_PYTHON_PSUTIL=y
BR2_PACKAGE_PYTHON_PYAES=y
BR2_PACKAGE_PYTHON_PYALSA=y
BR2_PACKAGE_PYTHON_PYDEVMEM=y
BR2_PACKAGE_PYTHON_PYUSB=y
BR2_PACKAGE_PYTHON_REQUESTS=y
BR2_PACKAGE_PYTHON_REQUESTS_OAUTHLIB=y
BR2_PACKAGE_PYTHON_REQUESTS_TOOLBELT=y
BR2_PACKAGE_PYTHON_SERIAL=y
BR2_PACKAGE_PYTHON_SERIAL_ASYNCIO=y
BR2_PACKAGE_PYTHON_WEBSOCKETS=y
BR2_PACKAGE_PYTHON_WEBSOCKET_CLIENT=y
BR2_PACKAGE_PYTHON_XMODEM=y
BR2_PACKAGE_PYTHON3_PY_PYC=y
BR2_PACKAGE_PYTHON_PYQT5=y
BR2_PACKAGE_PYTHON_PYQRCODE=y
BR2_PACKAGE_PYTHON_PYLIBFDT=y
BR2_PACKAGE_PYTHON3_READLINE=y
BR2_PACKAGE_PYTHON_JEDI=y
BR2_PACKAGE_PYTHON_LIBUSB1=y
BR2_PACKAGE_PYTHON_LXML=y
BR2_PACKAGE_PYTHON_MARKDOWN=y
BR2_PACKAGE_PYTHON_MSGPACK=y
BR2_PACKAGE_PYTHON_PERIPHERY=y
BR2_PACKAGE_PYTHON_PILLOW=y
BR2_PACKAGE_PYTHON_POSIX_IPC=y
BR2_PACKAGE_PYTHON_PROTOBUF=y
BR2_PACKAGE_PYTHON_PYGAME=y
BR2_PACKAGE_PYTHON_PYGAME_IMAGE=y
BR2_PACKAGE_PYTHON_PYGAME_EXAMPLES=y
BR2_PACKAGE_PYTHON_PYGAME_FONT=y
BR2_PACKAGE_PYTHON_PYGAME_MIXER=y
BR2_PACKAGE_PYTHON_PYUDEV=y
BR2_PACKAGE_PYTHON_PYYAML=y
BR2_PACKAGE_PYTHON_QRCODE=y
BR2_PACKAGE_PYTHON_QRCODE_PIL=y
BR2_PACKAGE_PYTHON_INTELHEX=y
BR2_PACKAGE_VIM=y
BR2_PACKAGE_VIM_RUNTIME=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="900M"
BR2_ROOTFS_OVERLAY="$(TOPDIR)/board/cvitek/SG200X/overlay"
BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="$(TOPDIR)/board/cvitek/SG200X/busybox-extra.config"

14
buildroot/configs/cvitek_SG200X_musl_riscv64_defconfig
View File

@@ -197,18 +197,6 @@ BR2_PACKAGE_NFTABLES=y
BR2_PACKAGE_IPTABLES=y
BR2_PACKAGE_IPTABLES_NFTABLES=y
BR2_PACKAGE_NCURSES_WCHAR=y
BR2_PACKAGE_LIBEDIT=y
BR2_PACKAGE_NGINX=y
BR2_PACKAGE_NGINX_HTTP=y
BR2_PACKAGE_NGINX_HTTP_DAV_MODULE=y
BR2_PACKAGE_NGINX_HTTP_MP4_MODULE=y
BR2_PACKAGE_NGINX_HTTP_FLV_MODULE=y
BR2_PACKAGE_NGINX_HTTP_GUNZIP_MODULE=y
BR2_PACKAGE_NGINX_STREAM=y
BR2_PACKAGE_NGINX_SELECT_MODULE=y
BR2_PACKAGE_NGINX_HTTP_FASTCGI_MODULE=y
BR2_PACKAGE_NGINX_HTTP_UWSGI_MODULE=y
BR2_PACKAGE_NGINX_HTTP_SCGI_MODULE=y
BR2_PACKAGE_RTC_TOOLS=y
BR2_PACKAGE_PICOCOM=y
BR2_PACKAGE_FBGRAB=y
@@ -393,6 +381,8 @@ BR2_PACKAGE_PYTHON_PYYAML=y
BR2_PACKAGE_PYTHON_QRCODE=y
BR2_PACKAGE_PYTHON_QRCODE_PIL=y
BR2_PACKAGE_PYTHON_INTELHEX=y
BR2_PACKAGE_MGBA=y
BR2_PACKAGE_GB_TEST_ROMS=y
BR2_PACKAGE_VIM=y
BR2_PACKAGE_VIM_RUNTIME=y

2
buildroot/package/Config.in
View File

@@ -2808,6 +2808,8 @@ menu "Sipeed"
source "package/tpudemo-sg200x/Config.in"
source "package/xuantie-gdb/Config.in"
source "package/sg2002-codec-firmware/Config.in"
source "package/mgba/Config.in"
source "package/gb-test-roms/Config.in"
endmenu

4
buildroot/package/gb-test-roms/Config.in Normal file
View File

@@ -0,0 +1,4 @@
config BR2_PACKAGE_GB_TEST_ROMS
bool "gb-test-roms"
help
game boy test roms

20
buildroot/package/gb-test-roms/gb-test-roms.mk Normal file
View File

@@ -0,0 +1,20 @@
################################################################################
#
# gb-test-roms
#
################################################################################
GB_TEST_ROMS_VERSION = 7.0
GB_TEST_ROMS_SOURCE = game-boy-test-roms-v$(GB_TEST_ROMS_VERSION).zip
GB_TEST_ROMS_SITE = https://github.com/c-sp/gameboy-test-roms/releases/download/v$(GB_TEST_ROMS_VERSION)
define GB_TEST_ROMS_EXTRACT_CMDS
unzip $(GB_TEST_ROMS_DL_DIR)/$(GB_TEST_ROMS_SOURCE) -d $(@D)
endef
define GB_TEST_ROMS_INSTALL_TARGET_CMDS
mkdir -pv $(TARGET_DIR)/usr/share/gb-test-roms/
rsync -r --verbose --copy-dirlinks --copy-links --hard-links ${@D}/* $(TARGET_DIR)/usr/share/gb-test-roms/
endef
$(eval $(generic-package))

8
buildroot/package/mgba/Config.in Normal file
View File

@@ -0,0 +1,8 @@
config BR2_PACKAGE_MGBA
bool "mgba"
depends on BR2_PACKAGE_SDL
depends on BR2_PACKAGE_QT5
help
game boy advance emulator
https://github.com/mgba-emu/mgba

18
buildroot/package/mgba/mgba.mk Normal file
View File

@@ -0,0 +1,18 @@
################################################################################
#
# mgba
#
################################################################################
MGBA_VERSION = a2587cb8cff265d9f327a9413b4f2c5e607850fb
MGBA_SITE = $(call github,mgba-emu,mgba,$(MGBA_VERSION))
MGBA_DEPENDENCIES = qt5base qt5svg qt5multimedia sdl
MGBA_CONF_OPTS += -DBUILD_SDL=ON
MGBA_CONF_OPTS += -DBUILD_QT=OFF
MGBA_CONF_OPTS += -DBUILD_GL=OFF
MGBA_CONF_OPTS += -DBUILD_GLES2=OFF
MGBA_CONF_OPTS += -DBUILD_GLES2=OFF
MGBA_CONF_OPTS += -DUSE_PNG=OFF
$(eval $(cmake-package))

2
buildroot/package/tpudemo-sg200x/tpudemo-sg200x.mk
View File

@@ -4,7 +4,7 @@
#
################################################################################
TPUDEMO_SG200X_VERSION = 118431aa403322f040dcad8ccd7f9fd7c07b9923
TPUDEMO_SG200X_VERSION = 345541b2f2a30e4efaa7505aa3b911826ec78505
TPUDEMO_SG200X_SITE = $(call github,0x754C,tpudemo-sg200x,$(TPUDEMO_SG200X_VERSION))
define TPUDEMO_SG200X_INSTALL_TARGET_CMDS

3
linux_5.10/drivers/video/fbdev/Makefile
View File

@@ -128,7 +128,8 @@ obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_MX3) += mx3fb.o
obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
obj-$(CONFIG_FB_SIMPLE) += simplefb.o dc8000-fb.o
obj-$(CONFIG_FB_SIMPLE) += simplefb.o
# dc8000-fb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o

43
middleware/v2/.gitignore vendored
View File

@@ -1,43 +0,0 @@
*.d
*.o
*.dep
*.dwo
*_asan
sample/audio/sample_audio
sample/audio/sample_audio_aec
sample/audio/sample_audio_nr
sample/audio/sample_audio_resample
sample/audio/sample_audio_transcode
sample/audio/sample_audio_rtos
sample/cipher/sample_cipher
sample/cvg/sample_cvg
sample/mipi_tx/sample_dsi
sample/fisheye/sample_fisheye
sample/overlay/sample_overlay
sample/region/sample_region
sample/venc/sample_vcodec
sample/vdec/sample_vdec
sample/venc/sample_venc
sample/vio/sample_vio
sample/vdecvo/sample_vdecvo
sample/multivenc/sample_multivenc
sample/ir_auto/ir_auto
sample/mipi_tx/lt9611/lt9611
sample/osdc/sample_osdc
sample/scene_auto/sample_scene_auto
sample/sensor_test/sensor_test
sample/tp2863_tp2803/sample_test_tp2863_tp2803
modules/venc/vc/jpeg/driver/bm_jpg_test
modules/venc/vc/jpeg/driver/bmjpuapi/bmjpegdec
modules/venc/vc/jpeg/driver/bmjpuapi/bmjpegenc
modules/venc/vc/vcodec/codebase/cvi_h265_enc_test
modules/venc/vc/vcodec/codebase/cvi_h264_dec
modules/venc/vc/vcodec/codebase/cvi_h265_dec
modules/venc/vc/jpeg/driver/cvi_jpg_codec
modules/venc/vc/vcodec/codebase/sample/cvi_vcodec_version.h
modules/venc/vc/jpeg/driver/include/version.h
.vscode/settings.json

2
middleware/v2/component/isp/.gitignore vendored
View File

@@ -1,2 +0,0 @@
*.d
*.o

3
middleware/v2/sample/gyro/.gitignore vendored
View File

@@ -1,3 +0,0 @@
sample_get_gyro
sample_get_acc
sample_get_temp

36
middleware/v2/sample/ive/.gitignore vendored
View File

@@ -1,36 +0,0 @@
sample_add
sample_sub
sample_and
sample_xor
sample_or
sample_erode
sample_dilate
sample_thresh
sample_thresh_U16
sample_thresh_S16
sample_ordstatfilter
sample_resize
sample_sad
sample_ncc
sample_map
sample_lbp
sample_integ
sample_hist
sample_gradfg
sample_csc
sample_filter
sample_filterandcsc
sample_cannyhysedge
sample_cannyedge
sample_dma
sample_magandang
sample_bernsen
sample_sobel
sample_normgrad
sample_16bitto8bit
sample_stcandicorner
sample_framediffmotion
sample_gmm
sample_gmm2
sample_bgmodel
sample_query

39
u-boot-2021.10/cmd/cvi_vo.c
View File

@@ -3,8 +3,10 @@
* Copyright (C) Cvitek Co., Ltd. 2019-2020. All rights reserved.
*/
#include <config.h>
#include <command.h>
#include <common.h>
#include <log.h>
#include <stdlib.h>
#include <linux/delay.h>
#include <cpu_func.h>
@@ -17,6 +19,8 @@
#include <asm/io.h>
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define PANLE_ADAPTIVITY 0
enum sclr_vo_intf intf_type = SCLR_VO_INTF_MIPI;
@@ -154,8 +158,7 @@ static void dsi_panel_init(void)
u8 prepare = panel_desc.hs_timing_cfg->prepare;
u8 zero = panel_desc.hs_timing_cfg->zero;
u8 trail = panel_desc.hs_timing_cfg->trail;
debug("Init panel %s\n", panel_desc.panel_name);
printf("Init panel %s\n", panel_desc.panel_name);
mipi_tx_set_combo_dev_cfg(panel_desc.dev_cfg);
dsi_init(0, panel_desc.dsi_init_cmds, panel_desc.dsi_init_cmds_size);
dphy_set_hs_settle(prepare, zero, trail);
@@ -183,6 +186,38 @@ static int do_startvo(struct cmd_tbl *cmdtp, int flag, int argc, char * const ar
return CMD_RET_USAGE;
uclass_get_device(UCLASS_VIDEO, 0, &udev);
char *panel_name = NULL;
panel_name = env_get("panel");
if (panel_name != NULL) {
if (strcmp(panel_name,"zct2133v1") == 0) { // 7inch
panel_desc.panel_name = "zct2133v1-800x1280";
panel_desc.dev_cfg = &dev_cfg_zct2133v1_800x1280;
panel_desc.hs_timing_cfg = &hs_timing_cfg_zct2133v1_800x1280;
panel_desc.dsi_init_cmds = dsi_init_cmds_zct2133v1_800x1280;
panel_desc.dsi_init_cmds_size = ARRAY_SIZE(dsi_init_cmds_zct2133v1_800x1280);
} else if (strcmp(panel_name,"st7701_dxq5d0019b480854") == 0) { // 5inch
panel_desc.panel_name = "ST7701-480x854dxq";
panel_desc.dev_cfg = &dev_cfg_st7701_480x854dxq;
panel_desc.hs_timing_cfg = &hs_timing_cfg_st7701_480x854dxq;
panel_desc.dsi_init_cmds = dsi_init_cmds_st7701_480x854dxq;
panel_desc.dsi_init_cmds_size = ARRAY_SIZE(dsi_init_cmds_st7701_480x854dxq);
} else if (strcmp(panel_name,"st7701_hd228001c31") == 0) { // 2.8 inch
panel_desc.panel_name = "ST7701-368x552";
panel_desc.dev_cfg = &dev_cfg_st7701_368x552;
panel_desc.hs_timing_cfg = &hs_timing_cfg_st7701_368x552;
panel_desc.dsi_init_cmds = dsi_init_cmds_st7701_368x552;
panel_desc.dsi_init_cmds_size = ARRAY_SIZE(dsi_init_cmds_st7701_368x552);
} else if (strcmp(panel_name,"st7701_d300fpc9307a") == 0) { // 3 inch
panel_desc.panel_name = "ST7701-480x854";
panel_desc.dev_cfg = &dev_cfg_st7701_480x854;
panel_desc.hs_timing_cfg = &hs_timing_cfg_st7701_480x854;
panel_desc.dsi_init_cmds = dsi_init_cmds_st7701_480x854;
panel_desc.dsi_init_cmds_size = ARRAY_SIZE(dsi_init_cmds_st7701_480x854);
} else {
printf("panel %s not found\n\r", panel_name);
}
}
switch (intf) {
case VO_INTF_MIPI: {
mipi_tx_set_mode(0);

3
u-boot-2021.10/include/configs/mars-asic.h
View File

@@ -256,6 +256,7 @@
"sdboot=" SD_BOOTM_COMMAND "\0" \
"sdbootauto=" SD_BOOTM_COMMAND_AUTO "\0" \
"othbootargs=" OTHERBOOTARGS "\0" \
"loadenvcmd=mmc info;load mmc 0:1 ${uImage_addr} uEnv.txt; if test $? -eq 0; then env import ${uImage_addr} - ; fi;\0" \
PARTS_OFFSET
/********************************************************************************/
@@ -311,7 +312,7 @@
#ifdef CONFIG_ENABLE_ALIOS_UPDATE
#define CONFIG_BOOTCOMMAND "cvi_update_rtos"
#elif CONFIG_SD_BOOT
#define CONFIG_BOOTCOMMAND SHOWLOGOCMD "run sdboot || run sdbootauto"
#define CONFIG_BOOTCOMMAND "run loadenvcmd ; " SHOWLOGOCMD "run sdboot || run sdbootauto"
#else
#define CONFIG_BOOTCOMMAND SHOWLOGOCMD "cvi_update || run norboot || run nandboot ||run emmcboot"
#endif

10
u-boot-2021.10/include/cvitek/cvi_panels/cvi_panels.h
View File

@@ -12,6 +12,7 @@
#include "cvi_i80.h"
#include "cvi_lvds.h"
struct panel_desc_s {
char *panel_name;
const struct combo_dev_cfg_s *dev_cfg;
@@ -24,6 +25,11 @@ struct panel_desc_s {
struct cvi_lvds_cfg_s *lvds_cfg;
};
#include "dsi_st7701_d300fpc9307a.h"
#include "dsi_zct2133v1.h"
#include "dsi_st7701_dxq5d0019b480854.h"
#include "dsi_st7701_hd228001c31.h"
#ifdef MIPI_PANEL_HX8394
#include "dsi_hx8394_evb.h"
static struct panel_desc_s panel_desc = {
@@ -79,7 +85,6 @@ static struct panel_desc_s panel_desc = {
.dsi_init_cmds_size = ARRAY_SIZE(dsi_init_cmds_ota7290b_320x1280)
};
#elif defined(MIPI_PANEL_ST7701_D300FPC9307A)
#include "dsi_st7701_d300fpc9307a.h"
static struct panel_desc_s panel_desc = {
.panel_name = "ST7701-480x854",
.dev_cfg = &dev_cfg_st7701_480x854,
@@ -106,7 +111,6 @@ static struct panel_desc_s panel_desc = {
.dsi_init_cmds_size = ARRAY_SIZE(dsi_init_cmds_icn9707_480x1920)
};
#elif defined(MIPI_PANEL_ST7701_DXQ5D0019B480854)
#include "dsi_st7701_dxq5d0019b480854.h"
static struct panel_desc_s panel_desc = {
.panel_name = "ST7701-480x854dxq",
.dev_cfg = &dev_cfg_st7701_480x854dxq,
@@ -133,7 +137,6 @@ static struct panel_desc_s panel_desc = {
.dsi_init_cmds_size = ARRAY_SIZE(dsi_init_cmds_st7701_480x800)
};
#elif defined(MIPI_PANEL_ST7701_HD228001C31)
#include "dsi_st7701_hd228001c31.h"
static struct panel_desc_s panel_desc = {
.panel_name = "ST7701-368x552",
.dev_cfg = &dev_cfg_st7701_368x552,
@@ -160,7 +163,6 @@ static struct panel_desc_s panel_desc = {
.dsi_init_cmds_size = ARRAY_SIZE(dsi_init_cmds_st7785m_240x320)
};
#elif defined(MIPI_PANEL_ZCT2133V1)
#include "dsi_zct2133v1.h"
static struct panel_desc_s panel_desc = {
.panel_name = "zct2133v1-800x1280",
.dev_cfg = &dev_cfg_zct2133v1_800x1280,