From b31cdb365f974462fc2f674a4b7073ce9b2d47a1 Mon Sep 17 00:00:00 2001 From: 916BGAI Date: Thu, 7 May 2026 18:39:50 +0800 Subject: [PATCH] update PicoClaw expansion board docs for PicoClaw v0.2.8 support --- docs/hardware/en/lichee/RV_Nano/7_picoclaw_board.md | 4 ++-- docs/hardware/zh/lichee/RV_Nano/7_picoclaw_board.md | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/hardware/en/lichee/RV_Nano/7_picoclaw_board.md b/docs/hardware/en/lichee/RV_Nano/7_picoclaw_board.md index 8f470942..87831d4b 100644 --- a/docs/hardware/en/lichee/RV_Nano/7_picoclaw_board.md +++ b/docs/hardware/en/lichee/RV_Nano/7_picoclaw_board.md @@ -62,7 +62,7 @@ File name: `picoclaw-rv-nano-YYYYMMDD.img.xz` ### 1. Select an Application -After startup, the system enters the application selection screen by default. Press `KEY1` to select the PicoClaw application, or press `KEY2` to select the CC Buddy application. CC Buddy is a customized virtual pet application that provides a cute interactive interface and simple conversation features, making it suitable for first-time users to try out. +After startup, the system enters the application selection screen by default. Press `KEY1` to select the PicoClaw application, or press `KEY2` to select the CC Buddy application. In the PicoClaw application, long-press `KEY2` to return to this application selection screen. CC Buddy is a customized virtual pet application that provides a cute interactive interface and simple conversation features, making it suitable for first-time users to try out. ### 2. Network Connection @@ -83,7 +83,7 @@ Then log in with SSH or serial. Default username/password are both `root`. After On first boot, PicoClaw is not initialized yet. You need initial configuration first. You can use Web UI or TUI. The following uses Web UI. #### Web UI Setup -Open `http://:18800` in your browser. A token is required on first access; currently the default token is `root`. +Open `http://:18800` in your browser to enter the PicoClaw Web UI. On first access, you need to set a password. You can use this password to log in later. If you forget the password, delete the `/root/.picoclaw` directory or re-flash the image to reset it. #### Chat Model Setup Open settings, select **Model**, then choose a provider and model. For example, you can use `openai/gpt-5.4` as the default model. diff --git a/docs/hardware/zh/lichee/RV_Nano/7_picoclaw_board.md b/docs/hardware/zh/lichee/RV_Nano/7_picoclaw_board.md index cbded85f..f03a19af 100644 --- a/docs/hardware/zh/lichee/RV_Nano/7_picoclaw_board.md +++ b/docs/hardware/zh/lichee/RV_Nano/7_picoclaw_board.md @@ -66,7 +66,7 @@ PicoClaw 扩展板定制镜像下载： ### 选择应用 -应用默认启动后进入应用选择界面，按下 `KEY1` 键选择 PicoClaw 应用，按下 `KEY2` 键选择 CC Buddy 应用。CC Buddy 自定义的虚拟宠物应用，提供了一个可爱的交互界面和简单的对话功能，适合初次使用者体验。 +应用默认启动后进入应用选择界面，按下 `KEY1` 键选择 PicoClaw 应用，按下 `KEY2` 键选择 CC Buddy 应用。在 PicoClaw 应用中长按 `KEY2` 可返回该应用选择界面。CC Buddy 自定义的虚拟宠物应用，提供了一个可爱的交互界面和简单的对话功能，适合初次使用者体验。 ### 连接 Wi-Fi @@ -90,11 +90,11 @@ PicoClaw 扩展板定制镜像下载： > ```bash > # 在 sd 卡第一个分区创建 wifi.sta 文件启用 sta 模式: > touch /boot/wifi.sta && rm -f /boot/wifi.ap /boot/wifi.mon -> +> > # 然后将 AP 的 SSID 和密码写入文件: > echo ssid > /boot/wifi.ssid > echo pass > /boot/wifi.pass -> +> > # 最后重启 Wifi 服务 > /etc/init.d/S30wifi restart > ``` @@ -106,7 +106,7 @@ PicoClaw 扩展板定制镜像下载： 第一次进入系统后，PicoClaw 还未完成初始化，需要先进行配置。可以使用 Web UI 或者 TUI 进行配置，以下以 Web UI 为例： #### Web UI 配置 -在浏览器中访问 `http://<设备 IP>:18800`，进入 PicoClaw Web UI。第一次进入需要输入令牌，目前令牌默认为 `root`。 +在浏览器中访问 `http://<设备 IP>:18800`，进入 PicoClaw Web UI。第一次进入需要设置密码，后续可以使用该密码登录。如果忘记密码，可以删除 `/root/.picoclaw` 文件夹，或者重刷镜像进行重置。 #### 对话模型配置 进入设置界面，选择 **模型**，根据需要选择合适的模型提供商和模型。例如可选择 `openai/gpt-5.4` 作为默认模型。