From 65f23dde175b4fd6af886823510cd894db45e4ec Mon Sep 17 00:00:00 2001 From: root Date: Mon, 27 Apr 2026 18:06:24 +0800 Subject: [PATCH] NanoKvm Pro Update Faq --- docs/hardware/en/kvm/NanoKVM_Pro/faq.md | 1 + docs/hardware/zh/kvm/NanoKVM_Pro/faq.md | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/docs/hardware/en/kvm/NanoKVM_Pro/faq.md b/docs/hardware/en/kvm/NanoKVM_Pro/faq.md index 035b8833..81d05346 100644 --- a/docs/hardware/en/kvm/NanoKVM_Pro/faq.md +++ b/docs/hardware/en/kvm/NanoKVM_Pro/faq.md @@ -86,6 +86,7 @@ NanoKVM Pro supports restoring or updating the system via USB image burning. * Download and install the burning tool [balenaEtcher](https://etcher.balena.io/). 2. **Enter Burning Mode** + * Please remove the TF card if installed. * Use the USB data cable to connect the NanoKVM Pro's HID interface to your computer. * Press and hold the User button on the NanoKVM, then power it on (or press the Reset button while powered on) until the orange LED turns off. * The device will then enter burning mode, and the orange LED will start flashing again. Check if your computer recognizes the new disk device. diff --git a/docs/hardware/zh/kvm/NanoKVM_Pro/faq.md b/docs/hardware/zh/kvm/NanoKVM_Pro/faq.md index a19758ff..d456d2a8 100644 --- a/docs/hardware/zh/kvm/NanoKVM_Pro/faq.md +++ b/docs/hardware/zh/kvm/NanoKVM_Pro/faq.md @@ -6,6 +6,8 @@ NanoKVM Pro 会不定期更新应用，一些问题可能在新的应用中已 ## 系统启动 + + ### 绿色LED闪烁 绿色LED是 NanoKVM Pro 的电源指示，如果连接了供电能力较弱的电源，绿色LED会因电压不稳定而无法启动，请拔掉所有供电并更换电源 @@ -87,7 +89,7 @@ NanoKVM Pro 支持通过 USB 烧录镜像的方式来恢复或更新系统。 - 下载并安装烧录工具 [balenaEtcher](https://etcher.balena.io/) 2. **进入烧录模式** - +- 如果有安装tf卡请拔下tf卡。 - 使用 USB 数据线连接 NanoKVM Pro 的 HID 接口到电脑 - 先按住 NanoKVM 的 User 按键，然后接通电源（或者在通电状态下按下 Reset 按键），直到橙色 LED 灯熄灭 - 这时设备会进入烧录模式，橙色灯再次开始闪烁，查看电脑是否识别到新的磁盘设备